Hey guys, about the 8.32.05 Drivers, I installed FC6 yesterday, with all developments tools, and basically everything other than Xen and Visualization stuff, etc etc.
So. I tried the guides there were in the site, but none worked! first off, I don't have a lib64 folder, but I stilled linked it with the qt-3.3/lib, which worked fine.
Whenever I use the command aticonfig --initial --input=/etc/X11/xorg.conf
My XServer can't start, and I have to resort back to restoring my original. I use an ATi Radeon X700Pro. When I tried to the --buildpkg Fedora/FC6, it only gave me 4 RPMs, not five, which maybe my primary problem. The one it did not give me was: ATI-fglrx-IA32-libs-8.32.5-1.fc6.x86_64.rpm
Here is my current Xorg.conf File. (Right after I restored it)
(I added the ServerFlags and Extentions section after I got XServer running again)
This is the Xorg.conf that I get when I use
aticonfig --initial --input=/etc/X11/xorg.conf
Which, makes XServer not work.
That's my story, any help would be greatly appreciated!
So. I tried the guides there were in the site, but none worked! first off, I don't have a lib64 folder, but I stilled linked it with the qt-3.3/lib, which worked fine.
Whenever I use the command aticonfig --initial --input=/etc/X11/xorg.conf
My XServer can't start, and I have to resort back to restoring my original. I use an ATi Radeon X700Pro. When I tried to the --buildpkg Fedora/FC6, it only gave me 4 RPMs, not five, which maybe my primary problem. The one it did not give me was: ATI-fglrx-IA32-libs-8.32.5-1.fc6.x86_64.rpm
Here is my current Xorg.conf File. (Right after I restored it)
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "False"
EndSection
Section "ServerFlags"
Option "AIGLX" "False"
EndSection
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "False"
EndSection
Section "ServerFlags"
Option "AIGLX" "False"
EndSection
This is the Xorg.conf that I get when I use
aticonfig --initial --input=/etc/X11/xorg.conf
Which, makes XServer not work.
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dri"
Load "glx"
EndSection
Section "ServerFlags"
Option "AIGLX" "False"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "False"
EndSection
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dri"
Load "glx"
EndSection
Section "ServerFlags"
Option "AIGLX" "False"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "False"
EndSection
Comment