Is there support in either of the OSS drivers for HDMI audio on the RV730 GPU?
I have an Asus HD 4670 card in what is going to be an HTPC. We have just got ourselves a Sony Bravia KDL37W5500 HDTV. Video output over HDMI is fine but no sound - I get a pop-up message to the effect that device HDS ATI HDMI does not work and the system is dropping to PulseAudio. The TV works fine as a TV and HDMI sound works in WinXP and with fglrx (on F10) so not a direct hardware problem.
The system is a clean build of F11 and fully updated - I had the same problem on F10, which was the main reason for upgrading. xorg.conf was rebuilt from scratch using Xorg -configure. Version levels are:-
I have Option "Audio" "on" and Option "HDMI" "all" in the "Device" section of xorg.conf. I tried removing PulseAudio but made no difference so put it back. I was using mostly radeonhd up until now but switched to radeon as I can't use xrandr to change the resolution on HDMI with radeonhd - although it detects the HDMI port is connected and shows avalable modes, and worked fine with CRT previously. However both drivers appear to behave the same in respect to HDMI sound.
This looks like the relevant section from syslog:-
http://pastebin.com/f4d285e08
This is my current xorg.conf:-
Thanks in advance for any help...
Andrew
I have an Asus HD 4670 card in what is going to be an HTPC. We have just got ourselves a Sony Bravia KDL37W5500 HDTV. Video output over HDMI is fine but no sound - I get a pop-up message to the effect that device HDS ATI HDMI does not work and the system is dropping to PulseAudio. The TV works fine as a TV and HDMI sound works in WinXP and with fglrx (on F10) so not a direct hardware problem.
The system is a clean build of F11 and fully updated - I had the same problem on F10, which was the main reason for upgrading. xorg.conf was rebuilt from scratch using Xorg -configure. Version levels are:-
Fedora 11 (kernel 2.6.29.6-217.2.3.fc11.x86_64)
xorg-x11-drv-ati.x86_64 6.12.2-14.fc11
xorg-x11-drv-radeonhd.x86_64 1.2.5-2.10.20090714git.fc11
xorg-x11-drv-ati.x86_64 6.12.2-14.fc11
xorg-x11-drv-radeonhd.x86_64 1.2.5-2.10.20090714git.fc11
I have Option "Audio" "on" and Option "HDMI" "all" in the "Device" section of xorg.conf. I tried removing PulseAudio but made no difference so put it back. I was using mostly radeonhd up until now but switched to radeon as I can't use xrandr to change the resolution on HDMI with radeonhd - although it detects the HDMI port is connected and shows avalable modes, and worked fine with CRT previously. However both drivers appear to behave the same in respect to HDMI sound.
This looks like the relevant section from syslog:-
http://pastebin.com/f4d285e08
This is my current xorg.conf:-
Code:
Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "record" Load "extmod" Load "dri" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" #DisplaySize 1600 900 # mm DisplaySize 500 281 # mm Identifier "Monitor0" VendorName "SNY" ModelName "SONY TV" HorizSync 14.0 - 70.0 VertRefresh 48.0 - 62.0 EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ShowCache" # [<bool>] #Option "DynamicClocks" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] Option "Audio" "on" Option "HDMI" "all" Option "AccelMethod" "exa" Option "DRI" "on" Identifier "Card0" Driver "radeon" VendorName "ATI Technologies Inc" BoardName "RV730XT [Radeon HD 4670]" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
Andrew
Comment