Driver Installation Help for Broadcom BCM43162 802.11ac Wireless Network Adapter

[ayandon]

Friends,

I have an old AMD E1-6010 APU with AMD Radeon R2 Graphics Lenovo laptop that used to run very well with Windows 7.
Windows 10/11 are too slow. So, I tried to install Latest XFCE Ubuntu and Linux Mint. Works good.
But, in both cases, it can not activate my Wifi.


My Wifi Module is: Broadcom BCM43162 802.11ac Wireless Network Adapter (rev 02)
Hardware ID: 14e4:43ae
Subsystem ID: 17aa:0622

01:00.0 Network controller [0280]: Broadcom Inc. and subsidiaries BCM43162 802.11ac Wireless Network Adapter [14e4:43ae] (rev 02)
        Subsystem: Lenovo BCM43162 802.11ac Wireless Network Adapter [17aa:0622]
        Physical Slot: 0
        Flags: bus master, fast devsel, latency 0, IRQ 7
        Memory at f0c00000 (64-bit, non-prefetchable) [size=32K]
        Memory at f0800000 (64-bit, non-prefetchable) [size=4M]
        Capabilities: [48] Power Management version 3
        Capabilities: [58] MSI: Enable- Count=1/1 Maskable- 64bit+
        Capabilities: [68] Vendor Specific Information: Len=44 <?>
        Capabilities: [ac] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [13c] Device Serial Number 00-00-08-ff-ff-00-30-0e
        Capabilities: [150] Power Budgeting <?>
        Capabilities: [160] Virtual Channel
        Capabilities: [1b0] Latency Tolerance Reporting
        Capabilities: [220] Physical Resizable BAR​

 *-network UNCLAIMED
                description: Network controller
                product: BCM43162 802.11ac Wireless Network Adapter
                vendor: Broadcom Inc. and subsidiaries
                physical id: 0
                bus info: pci@0000:01:00.0
                version: 02
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress bus_master cap_list
                configuration: latency=0
                resources: memory:f0c00000-f0c07fff memory:f0800000-f0bfffff​

Can you pls guide me to configure?

Thanks in advance.