Announcement

Collapse
No announcement yet.

black border

Collapse
X
Collapse
 
  • Page of 12
  • Filter
  • Time
  • Show
Clear All
new posts
Previous 1 2 3 4 11 12 template Next
  • #1

    black border

    Hi

    Anyone using the latest 8.5 ati drivers? HAd a hard time getting it to compile and work. Finally got it compiled and my system can finally boot up to X. However, now my view are no longer display in full screen. I have a black border around the entire screen. Anyone else faced this problem?

    Before when I was on 8.4 and 8.3, never encounter this problem before.

    Is it an xorg.conf config issue? I have disable almost all the options i have inside already but still, it wont run in full screen. A alt-ctrl-backspace will restart X with the new xorg.conf without having to reboot the system, right?

    Anyone can help me?
    Tags: None
  • #2
    mind providing a some of the basic system specs of yours... more specifically the video card your using.

    Comment

    • #3
      my bad

      im running on debian sid using 2.6.25-bigmem kernel.
      im using a ati radeon 3850 card.

      my xorg.conf as follow
      Code:
      Section "ServerLayout"
	Identifier     "aticonfig-Layout[all]"
	Screen      0  "aticonfig-Screen[0]" 0 0
EndSection

Section "Files"
EndSection

Section "Module"
	Load	"bitmap"
	Load	"dbe"
	Load	"ddc"
	Load    "GLcore"
	Load	"glx"
	Load	"dri"
	# Load "extmod" but omit DGA extension - this must be included as is if you want to change resolution on the fly
	SubSection "extmod"
		Option "omit xfree86-dga"
	EndSubSection
	Load	"freetype"
	Load	"int10"
	Load	"record"
	Load	"type1"
	Load	"vbe"
EndSection

Section "InputDevice"
	Identifier  "Generic Keyboard"
	Driver      "kbd"
	Option	    "XkbRules" "xorg"
	Option	    "XkbModel" "pc104"
	Option	    "XkbLayout" "us"
EndSection

Section "InputDevice"
	Identifier  "Configured Mouse"
	Driver      "mouse"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
#	Option	    "VendorName" "ATI Proprietary Driver"
#	Option	    "ModelName" "Generic Autodetecting Monitor"
#	Option	    "DPMS" "true"
EndSection

#Section "Device"
#	Identifier  "aticonfig-Device[0]"
#	Driver      "fglrx"
#	Option	    "VideoOverlay" "on"
#	Option	    "OpenGLOverlay" "off"
#	Option	    "TextureVideo" "on"
#	Option      "TexturedVideoSync" "on"
#	Option      "Textured2D" "on"
#	Option      "TexturedXrender" "on"
#	Option      "UseFastTLS" "1"
#EndSection
# === ATI device section ===

Section "Device"
	Identifier	"ATI Graphics Adapter"
	Driver		"fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
#	Option		"NoDDC"
# === disable/enable XAA/DRI ===
#	Option		"no_accel"		"no"
#	Option		"no_dri"		"no"
# === misc DRI settings ===
#	Option		"mtrr"			"off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
	Option		"DesktopSetup"		"0x00000100" 
	Option		"MonitorLayout"		"AUTO, NONE"
	Option		"IgnoreEDID"		"off"
	Option		"HSync2"		"unspecified" 
	Option		"VRefresh2"		"unspecified" 
	Option		"ScreenOverlap"		"0" 
# === TV-out Management ===
#	Option		"NoTV"			"no"     
#	Option		"TVStandard""NTSC-M"     
#	Option		"TVHSizeAdj"		"0"     
#	Option		"TVVSizeAdj"		"0"     
#	Option		"TVHPosAdj"		"0"     
#	Option		"TVVPosAdj"		"0"     
#	Option		"TVHStartAdj"		"0"     
#	Option		"TVColorAdj"		"0"     
#	Option		"GammaCorrectionI"	"0x00000000"
#	Option		"GammaCorrectionII"	"0x00000000"
# === OpenGL specific profiles/settings ===
#	Option		"Capabilities"		"0x00000000"
# === Video Overlay for the Xv extension ===
	Option		"VideoOverlay"		"off"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
	Option		"OpenGLOverlay"		"off"
# === Center Mode (Laptops only) ===
#	Option		"CenterMode"		"off"
# === Pseudo Color Visuals (8-bit visuals) ===
#	Option		"PseudoColorVisuals"	"on"
# === QBS Management ===
#	Option		"Stereo"		"off"
#	Option		"StereoSyncEnable"	"1"
# === FSAA Management ===
#	Option		"FSAAEnable"		"no"
#	Option		"FSAAScale"		"1"
#	Option		"FSAADisableGamma"	"no"
#	Option		"FSAACustomizeMSPos"	"no"
#	Option		"FSAAMSPosX0"		"0.000000"
#	Option		"FSAAMSPosY0"		"0.000000"
#	Option		"FSAAMSPosX1"		"0.000000"
#	Option		"FSAAMSPosY1"		"0.000000"
#	Option		"FSAAMSPosX2"		"0.000000"
#	Option		"FSAAMSPosY2"		"0.000000"
#	Option		"FSAAMSPosX3"		"0.000000"
#	Option		"FSAAMSPosY3"		"0.000000"
#	Option		"FSAAMSPosX4"		"0.000000"
#	Option		"FSAAMSPosY4"		"0.000000"
#	Option		"FSAAMSPosX5"		"0.000000"
#	Option		"FSAAMSPosY5"		"0.000000"
# === Desktop Setup ===
	Option		"DesktopSetup"		"clone"
	Option		"EnableMonitor"		"crt1,lvds"
# === Misc Options ===
	Option		"UseFastTLS"		"1"
#	Option		"BlockSignalsOnLock"	"on"
#	Option		"UseInternalAGPGART"	"no"
#	Option		"ForceGenericCPU"	"no"
	Option		"XAANoOffscreenPixmaps" "true"
	Option		"Textured2D"		"on"
	Option		"TexturedVideo"		"on"
	Option		"TextureXrender"	"off"
	Option		"BackingStore"		"on"
#	Option		"MaxGARTSize"		"512"
	BusID		"PCI:1:0:0"    # vendor=1002, device=5460
	Screen		0
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	#Device     "aticonfig-Device[0]"
	Device     "ATI Graphics Adapter"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Extensions"
	Option	    "Composite" 	"On"
	Option      "XVideo" 		"On"
	Option	    "DAMAGE" 		"On"
	Option	    "RENDER"		"On"
      Last edited by bishamon; 24 May 2008, 01:08 PM.

      Comment

      • #4
        Might be worth commenting out the DesktopSetup option. Just a guess though...

        Also, can you dig through the xorg log and pick out the EDID- and screen-related lines ? It would be interesting to see what resolution & timing is being chosen relative to your screen's native resolution. Is this CRT or LCD ?
        Test signature

        Comment

        • #5
          Same problem here

          AMD Athlon(tm) X2 Dual Core Processor BE-2400
          x86_64 Fedora Core 8
          ATI Technologies Inc RS690 [Radeon X1200 Series]

          Commenting out the DesktopSetup line didn't help.

          Was fine under the last few versions.

          Comment

          • #6
            i remove all my settings and load the original xorg.conf that uses vesa drivers and the screen loaded in full screen in the entire monitor display.

            i actually have problems compiling the 8.5 drivers. so in the end, i used the script that i download from http://kanotix.com/files/install-fglrx-debian.sh to do the compiling and the installation and then the compilation can be completed with the deb files.

            i have download the drivers from ati went and build deb files from it, and install them. however, whenever i try to do a "m-a a-i fglrx", it will try to download the kernel-src from the apt sources. Is there anyway I can avoid that and make it use the kernel source that i have installed?

            Comment

            • #7
              Oh yes - LCD display on DVI connection.

              Comment

              • #8
                i believe its pretty much the driver issues or something went wrong during compilation? I even try taking out all the fglrx config and put back as vesa, then run a "aticonfig --initial" and do a reboot. Problem still remains.

                EDID related code as follow (lower resolution commented out due to post size limit)

                Code:
                (II) fglrx(0): Connected Display1: DFP on secondary TMDS [tmds2i]
(WW) EDID preferred timing clock 154.00MHz exceeds claimed max 150MHz, fixing
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: HSD  Model: 1cf3  Serial#: 355
(II) fglrx(0): Year: 2007  Week: 49
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 59  vert.: 37
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.650 redY: 0.329   greenX: 0.300 greenY: 0.623
(II) fglrx(0): blueX: 0.142 blueY: 0.065   whiteX: 0.316 whiteY: 0.341
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x870@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1920  vsize 1200  refresh: 60  vid: 209
(II) fglrx(0): #1: hsize: 1680  vsize 1050  refresh: 60  vid: 179
(II) fglrx(0): #2: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
(II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
(II) fglrx(0): #4: hsize: 1400  vsize 1050  refresh: 60  vid: 16528
(II) fglrx(0): #5: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): #6: hsize: 1280  vsize 960  refresh: 60  vid: 16513
(II) fglrx(0): #7: hsize: 1152  vsize 864  refresh: 75  vid: 20337
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 154.0 MHz   Image Size:  593 x 371 mm
(II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) fglrx(0): v_active: 1200  v_sync: 1203  v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) fglrx(0): Serial No: 749LB3KA00355
(II) fglrx(0): Ranges: V min: 56  V max: 75 Hz, H min: 24  H max: 80 kHz, PixClock max 154 MHz
(II) fglrx(0): Monitor name: Hanns.G HG281
(II) fglrx(0): Number of EDID sections to follow: 1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0):  00ffffffffffff002264f31c63010000
(II) fglrx(0):  31110103803b2578ea9e71a6544c9f24
(II) fglrx(0):  105157bfef80d100b300a94095009040
(II) fglrx(0):  81808140714f283c80a070b023403020
(II) fglrx(0):  360051732100001a000000ff00373439
(II) fglrx(0):  4c42334b413030333535000000fd0038
(II) fglrx(0):  4b18500f000a202020202020000000fc
(II) fglrx(0):  0048616e6e732e472048473238310145
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Primary Controller - DFP on secondary TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000008
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(**) fglrx(0):  PseudoColor visuals enabled
(**) fglrx(0): Pseudo Color Vsuals enabled
(**) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 43 modes found for primary display.
(--) fglrx(0): Virtual size is 1920x1200 (pitch 0)
(**) fglrx(0): *Mode "1920x1200": 154.0 MHz (scaled from 0.0 MHz), 74.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +vsync (74.0 kHz)
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +vsync (74.0 kHz)
(**) fglrx(0): *Mode "1920x1080": 172.8 MHz (scaled from 0.0 MHz), 67.1 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1920x1080"x60.0  172.79  1920 2040 2248 2576  1080 1081 1084 1118 +hsync (67.1 kHz)
(**) fglrx(0):  Default mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 56.2 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 (56.2 kHz)
(**) fglrx(0):  Default mode "1920x1080": 81.6 MHz (scaled from 0.0 MHz), 33.6 kHz, 30.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080"x30.0   81.64  1920 1984 2176 2432  1080 1081 1084 1119 interlace +hsync (33.6 kHz)
(**) fglrx(0):  Default mode "1920x1080": 74.2 MHz (scaled from 0.0 MHz), 28.1 kHz, 25.0 Hz (I)
(II) fglrx(0): Modeline "1920x1080"x25.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace (28.1 kHz)
(**) fglrx(0): *Mode "1680x1050": 146.2 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(**) fglrx(0): *Mode "1600x1200": 162.0 MHz (scaled from 0.0 MHz), 75.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 (75.0 kHz)
(**) fglrx(0): *Mode "1440x900": 106.5 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 +vsync (55.9 kHz)
(**) fglrx(0): *Mode "1400x1050": 121.8 MHz (scaled from 0.0 MHz), 65.3 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  121.75  1400 1488 1632 1864  1050 1053 1057 1089 +hsync (65.3 kHz)
(**) fglrx(0): *Mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 (80.0 kHz)
(**) fglrx(0):  Default mode "1280x1024": 128.9 MHz (scaled from 0.0 MHz), 74.6 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1280x1024"x70.0  128.94  1280 1368 1504 1728  1024 1025 1028 1066 +hsync (74.6 kHz)
(**) fglrx(0):  Default mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0   79.50  1280 1344 1472 1664  768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0   74.48  1280 1336 1472 1664  720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0):  Default mode "1280x720": 74.2 MHz (scaled from 0.0 MHz), 37.5 kHz, 50.0 Hz
(II) fglrx(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 (37.5 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 (67.5 kHz)
(**) fglrx(0):  Default mode "1152x864": 96.8 MHz (scaled from 0.0 MHz), 63.0 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1152x864"x70.0   96.76  1152 1224 1344 1536  864 865 868 900 +hsync (63.0 kHz)
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): *Mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 (60.0 kHz)
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0   78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): *Mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 (46.9 kHz)
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(**) fglrx(0):  Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0   78.43  1024 1080 1192 1360  768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0):  Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync (48.4 kHz)

                Comment

                • #9
                  This line makes me a bit suspicious :

                  (WW) EDID preferred timing clock 154.00MHz exceeds claimed max 150MHz, fixing
                  Is there any chance you upgraded any of the other X infrastructure (eg X server) or upgraded to a new distro version ? That message doesn't come from the driver.

                  Might be worth pasting the entire log into something like pastebin and posting a link here. I can't see what mode was actually chosen (log cuts off too soon, understand the post size limit) so not sure if the X framework "fixed" the clock mismatch by allowing a mode at a too-high clock (probably the one you want) or forcing to a lower resolution (possibly causing the black borders).
                  Test signature

                  Comment

                  • #10
                    Same here

                    Same issue switching to 8.5 drivers (black border).

                    I went back to 8.4 ...

                    Comment

                    Previous 1 2 3 4 11 12 template Next
                    Working...
                    X