I've tried these settings before (amongst the hundreds of xorg.conf and linux settings I've tried) but I thought I'd give it a go again. I copied jlambrecht's xorg.conf only changing the fontpath, keyboard and mouse sections. I get the same error .
Announcement
Collapse
No announcement yet.
AGP PCI-E Issues (Rialto chip) No Interupt (IRQ) assigned, Poor performance.
Collapse
X
-
These options didn't help here too.
I begin to think that we can't do anything to fix the problem and must wait for the next release
But i'll try every little thing, to track this down, if it helps.
I've commented out all modules in the module section, but the xorg.log says that most modules are still being loaded, not only the buildins, so i have no idea to go further on this topic.Last edited by uzi-; 06 December 2007, 12:25 PM.
Comment
-
Originally posted by uzi- View PostThese options didn't help here too.
I begin to think that we can't do anything to fix the problem and must wait for the next release
Comment
-
Code:Option "TexturedVideo" "ON" Option "AGPMask" "0x00000210" Option "AGPv3Mask" "0x00000002" #Option "KernelModuleParm" "agplock=3" Option "BusType" "AGP" Option "KernelModuleParm" "agpgart=2" Option "KernelModuleParm" "agp_try_unsupported=1" Option "KernelModuleParm" "debug=1" Option "KernelModuleParm" "maxlockedmem=512" Option "Stereo" "off" # not used Option "EnableLogo" "true" # not used Option "FSAAEnable" "1" Option "UseInternalAGPGart" "no" Option "MaxGARTSize" "512" Option "mtrr" "0" # not used Option "PBuffer" "0" Option "UseFastTLS" "2"
Code:(II) [drm] DRM interface version 1.0 (II) [drm] DRM open master succeeded. (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables. (II) fglrx(0): [drm] framebuffer handle = 0x39d000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [drm] installed DRM signal handler (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.43.2 (II) fglrx(0): Date: Nov 9 2007 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22-gentoo-r8 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0x0039f000 (II) fglrx(0): [pci] find AGP GART (II) fglrx(0): [agp] Mode=0x1f004a1b bridge: 0x8086/0x2570 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000210 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000002 (II) fglrx(0): [agp] enabling AGP with mode=0x1f004b19 (II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000) (II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004311) (II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode) (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): front overlay: 0xc1001400 (II) fglrx(0): back overlay: 0xc11b0000 (II) fglrx(0): video overlay: 0xc135ec00 (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01001400 (II) fglrx(0): FBMM initialized for area (0,0)-(1728,2428) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1050) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1728 x 1378 (==) fglrx(0): Backing store disabled
Code:Nov 30 16:08:35 localhost [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes. Nov 30 16:08:35 localhost [fglrx] IRQ_MGR is disabled untill GART_CACHABLE memory will be implemented<6>[fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset) Nov 30 16:08:35 localhost agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Nov 30 16:08:35 localhost agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode Nov 30 16:08:35 localhost agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode Nov 30 16:08:35 localhost [fglrx] AGP enabled, AgpCommand = 0x1f004311 (selected caps)
Code:Nov 30 16:09:50 localhost [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes. Nov 30 16:09:50 localhost [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset) Nov 30 16:09:50 localhost agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Nov 30 16:09:50 localhost agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode Nov 30 16:09:50 localhost agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode Nov 30 16:09:50 localhost [fglrx] AGP enabled, AgpCommand = 0x1f004311 (selected caps)
ps
video x1950gt 512mb agpLast edited by NIKE; 07 December 2007, 01:23 PM.
Comment
-
Originally posted by NIKE View PostCode:Option "TexturedVideo" "ON" Option "AGPMask" "0x00000210" Option "AGPv3Mask" "0x00000002" #Option "KernelModuleParm" "agplock=3" Option "BusType" "AGP" Option "KernelModuleParm" "agpgart=2" Option "KernelModuleParm" "agp_try_unsupported=1" Option "KernelModuleParm" "debug=1" Option "KernelModuleParm" "maxlockedmem=512" Option "Stereo" "off" # not used Option "EnableLogo" "true" # not used Option "FSAAEnable" "1" Option "UseInternalAGPGart" "no" Option "MaxGARTSize" "512" Option "mtrr" "0" # not used Option "PBuffer" "0" Option "UseFastTLS" "2"
Code:(II) [drm] DRM interface version 1.0 (II) [drm] DRM open master succeeded. (II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables. (II) fglrx(0): [drm] framebuffer handle = 0x39d000 (II) fglrx(0): [drm] added 1 reserved context for kernel (II) fglrx(0): X context handle = 0x1 (II) fglrx(0): [drm] installed DRM signal handler (II) fglrx(0): DRIScreenInit done (II) fglrx(0): Kernel Module Version Information: (II) fglrx(0): Name: fglrx (II) fglrx(0): Version: 8.43.2 (II) fglrx(0): Date: Nov 9 2007 (II) fglrx(0): Desc: ATI FireGL DRM kernel module (II) fglrx(0): Kernel Module version matches driver. (II) fglrx(0): Kernel Module Build Time Information: (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.22-gentoo-r8 (II) fglrx(0): Build-Kernel MODVERSIONS: no (II) fglrx(0): Build-Kernel __SMP__: yes (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000 (II) fglrx(0): [drm] register handle = 0x0039f000 (II) fglrx(0): [pci] find AGP GART (II) fglrx(0): [agp] Mode=0x1f004a1b bridge: 0x8086/0x2570 (II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000210 (II) fglrx(0): [agp] AGP v3 disable mask 0x00000002 (II) fglrx(0): [agp] enabling AGP with mode=0x1f004b19 (II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000) (II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004311) (II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode) (II) fglrx(0): DRI initialization successfull! (II) fglrx(0): front overlay: 0xc1001400 (II) fglrx(0): back overlay: 0xc11b0000 (II) fglrx(0): video overlay: 0xc135ec00 (II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x01001400 (II) fglrx(0): FBMM initialized for area (0,0)-(1728,2428) (II) fglrx(0): FBMM auto alloc for area (0,0)-(1728,1050) (front color buffer - assumption) (II) fglrx(0): Largest offscreen area available: 1728 x 1378 (==) fglrx(0): Backing store disabled
Code:Nov 30 16:08:35 localhost [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes. Nov 30 16:08:35 localhost [fglrx] IRQ_MGR is disabled untill GART_CACHABLE memory will be implemented<6>[fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset) Nov 30 16:08:35 localhost agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Nov 30 16:08:35 localhost agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode Nov 30 16:08:35 localhost agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode Nov 30 16:08:35 localhost [fglrx] AGP enabled, AgpCommand = 0x1f004311 (selected caps)
Code:Nov 30 16:09:50 localhost [fglrx] Maximum main memory to use for locked dma buffers: 1899 MBytes. Nov 30 16:09:50 localhost [fglrx] AGP detected, AgpState = 0x1f004a1b (hardware caps of chipset) Nov 30 16:09:50 localhost agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. Nov 30 16:09:50 localhost agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode Nov 30 16:09:50 localhost agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode Nov 30 16:09:50 localhost [fglrx] AGP enabled, AgpCommand = 0x1f004311 (selected caps)
ps
video x1950gt 512mb agp
Comment
-
I had pulled my FX5900 and installed my AGP X1600 Pro back when Phoronix was pushing the new ATi drivers as the next coming. I tried a lot of stuff, and don't recall ever even getting the IRQ errors, but performance was still horrible.
I'm back to my FX5900 now and am about to build a new system with an 8800 GT.
Comment
-
Originally posted by psycho_driver View PostI had pulled my FX5900 and installed my AGP X1600 Pro back when Phoronix was pushing the new ATi drivers as the next coming. I tried a lot of stuff, and don't recall ever even getting the IRQ errors, but performance was still horrible.
I'm back to my FX5900 now and am about to build a new system with an 8800 GT.
Performance was ... weird for me with the error. It was fast, n slow, sluggish, short spikes of performance, then, just slow. 8 more days! (i hope)
Comment
-
Originally posted by NIKE View PostCode:Option "TexturedVideo" "ON" Option "AGPMask" "0x00000210" Option "AGPv3Mask" "0x00000002" <snip> Option "UseFastTLS" "2"
ps
video x1950gt 512mb agp
Where do you get a listing of all those parameters that explains them???
Not that I would waste any more time trying. My respect for Radeon is done till they produce a documented driver that works right.
Comment
-
Originally posted by IrradeoActive View PostI've tried it, and it doesn't even stop my interrupt error on my geforce k8ns ultra939 board.
Where do you get a listing of all those parameters that explains them???
Not that I would waste any more time trying. My respect for Radeon is done till they produce a documented driver that works right.
Comment
Comment