Originally posted by barkas
View Post
Announcement
Collapse
No announcement yet.
Considering a new GPU soon. How's the 7700 series on Linux?
Collapse
X
-
Originally posted by barkas View PostThat leads to the question if the present low manpower way in which the OSS driver is built is sustainable or if it will always be more stable but much slower than the blob. I'm primarily benchmarking xbmc and I think the blob is about 3 times as fast as the OSS driver there.
That said, I don't expect the difference to be that big, and I also expect there will be a number of workloads where you do get performance parity quickly. The initial performance estimates we made were based on having a couple of AMD developers and maybe 6-8 full-time-equivalent community developers (not the thousands of developers that were being talked about ). Right now the number of AMD developers working on 2D/3D performance is pretty much what we planned (we hired more devs than originally planned but they aren't all working on 3D graphics) and the community developer pool is a bit smaller than we had expected.
Performance gains are running maybe 12-18 months behind what I expected (which pretty much fits the difference in #developers), but all indications are still that going from "blob is 3x as fast" to "blob is 1.5x as fast" (roughly where r300g seems to be today on 5xx hardware) should happen fairly quickly, say within a year. What I don't know is whether the r600g driver is going to need a fancier shader compiler to get there.
So... yes, I think the current model is sustainable. It's easy to forget that the devs have implemented support for ~10 years of hardware (2002-2012) in less than 5 years of development (2007-2012) and that now new hardware support is close to being "caught up" relatively more of that effort can go into features, performance, etc...Last edited by bridgman; 12 July 2012, 06:32 PM.Test signature
Comment
-
Originally posted by bridgman View PostTough question. The open source driver is maybe 1/100th the size and complexity of the proprietary driver (closer to 1/30th if you include all the Mesa common code) and in the areas where performance depends on cubic developer-years of optimization the open source driver is likely to always be slower simply because the proprietary drivers share code across all OSes and development costs can be shared across almost 100% of the PC market.
That said, I don't expect the difference to be that big, and I also expect there will be a number of workloads where you do get performance parity quickly. The initial performance estimates we made were based on having a couple of AMD developers and maybe 6-8 full-time-equivalent community developers (not the thousands of developers that were being talked about ). Right now the number of AMD developers working on 2D/3D performance is pretty much what we planned (we hired more devs than originally planned but they aren't all working on 3D graphics) and the community developer pool is a bit smaller than we had expected.
Performance gains are running maybe 12-18 months behind what I expected (which pretty much fits the difference in #developers), but all indications are still that going from "blob is 3x as fast" to "blob is 1.5x as fast" (roughly where r300g seems to be today on 5xx hardware) should happen fairly quickly, say within a year. What I don't know is whether the r600g driver is going to need a fancier shader compiler to get there.
So... yes, I think the current model is sustainable. It's easy to forget that the devs have implemented support for ~10 years of hardware (2002-2012) in less than 5 years of development (2007-2012) and that now new hardware support is close to being "caught up" relatively more of that effort can go into features, performance, etc...
The cost for an open-source drivers are (1/30)of the costs for 66% of the speed.
This means you only need 33% faster hardware to save (29/30) of the development costs.
this is the difference between a standard hd7950-3gb vram-900mhz to a hd7970-1000mhz clockspeed-3gb-vram1400mhz vram clock speed.
this is the difference between 306,42? and 406,?
I don't know how much the development costs of both drivers are but for consumers its only ~100? per "high-end-card" difference.
In my point of view AMD should drop the closed source driver and save the development money and go with the much cheaper open-source driver model.
But maybe I'm wrong because development a driver is so cheap that they earn so much profit on this 100? difference per card.
But if driver development is so cheap then the closed source driver is even more a fake.
Comment
-
Driver optimization is definitely a case of *seriously* diminishing returns as you go further up the curve. I haven't done any curve-fitting recently but there's no question that the first 5-10% of the work can give you maybe 60-70% of the satisfaction *if* you choose the right 10% to work on.
I've been pretty happy running low-midrange cards with the open source graphics driver (HD 5670 was the last card I bought) and getting decent performance, with a few caveats :
1. I don't have enough free time to do much gaming, so my workloads are biased toward the less-performance-critical
2. One of the important optimization tasks is either reducing CPU overhead or spreading the overhead across multiple threads (which has pretty much the same effect if you have multiple cores), and a faster GPU doesn't help in cases where you are CPU limited.
3. There is some fairly low-hanging fruit that comes from identifying "really slow" cases where either the driver doesn't accelerate a certain function as much as it could or there are side effects from the current acceleration (lots of memory copies etc...)... again, not all of these are helped by faster hardware although many of them are.
Some of (2) has already been done (eg Marek added multithreading last summer) and it's probably fair to say that a small amount of (3) happened last year but it's just started to really ramp up recently.Test signature
Comment
-
Originally posted by bridgman View PostDriver optimization is definitely a case of *seriously* diminishing returns as you go further up the curve. I haven't done any curve-fitting recently but there's no question that the first 5-10% of the work can give you maybe 60-70% of the satisfaction *if* you choose the right 10% to work on.
I've been pretty happy running low-midrange cards with the open source graphics driver (HD 5670 was the last card I bought) and getting decent performance, with a few caveats :
1. I don't have enough free time to do much gaming, so my workloads are biased toward the less-performance-critical
2. One of the important optimization tasks is either reducing CPU overhead or spreading the overhead across multiple threads (which has pretty much the same effect if you have multiple cores), and a faster GPU doesn't help in cases where you are CPU limited.
3. There is some fairly low-hanging fruit that comes from identifying "really slow" cases where either the driver doesn't accelerate a certain function as much as it could or there are side effects from the current acceleration (lots of memory copies etc...)... again, not all of these are helped by faster hardware although many of them are.
Some of (2) has already been done (eg Marek added multithreading last summer) and it's probably fair to say that a small amount of (3) happened last year but it's just started to really ramp up recently.
If it were my company I would make a study about worth it or not.
I'm sure AMD don't even think in this rational logical way.
My advice to AMD is: Cut costs to increase profit by act rational/logical by drop closed source drivers.
Comment
-
Originally posted by Dandel View PostI would take benchmarks with a grain of salt... After all, often times the binary driver could easily outright lie, crash, produce incorrect results ( bugs mainly), and various other things.
@bridgman: sounds reasonable. I only wish it would go faster and some things really irritated me, like the hdmi audio thing. That was too slow by far. Also the GCN support takes a long time, I had hoped for more there.
Comment
-
@Bridgman
In the last optimized test a month ago (http://www.phoronix.com/scan.php?pag...ompete12&num=1 ), the low-end card (6450) was 1/2 to 1/6 of the blob.
That is a higher difference than with more powerful cards, which goes against what you've said earlier - that the high-end cards would have a larger difference to the blob.
What's your opinion on this?
Comment
-
Originally posted by curaga View PostIn the last optimized test a month ago (http://www.phoronix.com/scan.php?pag...ompete12&num=1 ), the low-end card (6450) was 1/2 to 1/6 of the blob. That is a higher difference than with more powerful cards, which goes against what you've said earlier - that the high-end cards would have a larger difference to the blob. What's your opinion on this?
On the high end it's hard to make full use of the hardware with open source drivers with the current level of driver optimization for *CPU* usage, ie there's a good chance the drivers will bottleneck on CPU before they fully utilize the GPU on most workloads. Note that as shader workloads become more complex high end cards become more attractive even without further driver optimizations.
On the low end the issue is that the die area allocation on low end part is usually optimized for different workloads than on the midrange and high end parts (all vendors, not just us). Specifically, the ratio between shader throughput (ALUs) and pixel/texel throughput (texture units / ROPs) changes, with low end parts having relatively less shader power compared to pixel-pushing ability. This makes sense if you think about it -- you don't expect low end parts to deliver the same gaming experience but you still expect basic 2D operations to happen snappity-quick. The differences are less drastic on newer discrete GPU families because integrated graphics have displaced the very low end discrete GPU market, but even on the HD 6xxx family there's maybe a 10:1 difference in shader throughput vs only 4:1 difference in pixel throughput.
This isn't particularly meaningful on its own, but if you combine the above point with the fact that shader compiler optimization is usually one of the last things to happen in an open source driver, you get the result that shader-intensive workloads on low end hardware with open source drivers are likely to bottleneck on the shader core first, while running the same workload on midrange hardware would be more likely to "bottleneck on everything at the same time" because the balance between hardware resources is different.
If you look at results on specific benchmarks, you'll see the relative performance on low-end hardware is higher on programs with simpler shaders. It's all about the *first* bottleneck you hit - low end cards tend to hit shader limits first, high end cards tend to hit CPU limits first. Make sense ?
Originally posted by Kano View Post@bridgman
Do you really need to buy gfx cards? What does amd do with all the test samples?
Originally posted by maldorordiscord View PostIn my point of view business is all about economy and if the optimization of the last bits burn all the money "Driver optimization is definitely a case of *seriously* diminishing returns as you go further up the curve." then its not the smart way to do business. If it were my company I would make a study about worth it or not. I'm sure AMD don't even think in this rational logical way. My advice to AMD is: Cut costs to increase profit by act rational/logical by drop closed source drivers.
This is part of the bigger challenge we all face, specifically that supply chains win by simplifying and reducing choices (eg "what the heck, why bother with Linux ?) even though the people who actually buy and use the hardware want more choice and more support for their specific needs. The result is arguably a "race to the bottom", eg where every bookstore sells the same top-30 best sellers and nothing else because that works best for *them* even if it sucks for the customer.
If you want to avoid that race to the bottom you need to play both short term and long term games at the same time, which may seem wasteful but may also be unavoidable for a while.Last edited by bridgman; 13 July 2012, 07:42 AM.Test signature
Comment
-
Originally posted by bridgman View PostWe have this discussion every year or so. Problem is that a lot of PC industry buying decisions are still reliant on feature checklists and benchmark numbers. Having all the right answers to the questions isn't enough to get you the order, but missing a feature or being a few percent down on performance is enough to disqualify you. There's a theorem somewhere that says it's dangerous to be more rational and logical than your market.
But best explanation you have ever given to me!
Damn these stupid people damn I'm to rational and to logical for this kind of world damn!
Really just: damn...
Mankind just lost all hope.
Anyway if I buy a hd7970 can I get the 100€ "catalyst" closed-source-tax back if I promise I will use the open-source driver?
Can we please get a Catalyst incompatible firmware to make sure we don't need to pay the catalyst-closed-source-tax ?
AMD really should pay 100€(for a hd7970) compensation to opensource driver users!
In fact if I buy a AMD card I pay the (29/30)catalyst-closed-source-tax and I only get (1/30) open-source improvement for my money :-( this is so sad.
This catalyst-closed-source-tax is just unfair!Last edited by maldorordiscord; 13 July 2012, 09:22 AM.
Comment
Comment