I posted my thread on archlinux forums (my distro) but alas no response, so i'm hoping if anyone else could help me? I'm currently running 2.6.29 kernel with catalyst 9.4, sure enough it "works" as in I have X+DE (kde4= up and running but compiz runs like shit. Basically I wan't most of the plugins/3D in compiz to work, like wobbly windows, but everytime i try one, all the windows/borders goes static.
Should I downgrade my catalyst or try xf86-video-radeonhd (im currently at work) ?
Trust me if I could rip out my "lovely" ATI from my sony vaio, I would trust me and go with nvidia instead.
Here's my problem after a few hours of fiddling I at least managed to get compiz up and running with a few plugins, but wobbly windows/alt tab/moving windows (very important to me) does not work at all. Everytime I execute any command on the wiki that's related to emerald/fusion icon/kde etc all my windows goes into some sort of static mode, can't move them around, can't do anything at all unless I execute: kwin --replace.
my dmesg log is full of this crap:
(won't paste the entire content in here) check out my paste if you wish: EDIT: I can't paste all those lines WOW! "time out while sending data" just imagine i have 800 lines of the same crap
compiz fusion errors running fusion-icon (notice the errors I get from running wobbly windows)
Anyone running ati open source drivers with compiz/3d effects without issues?
Should I downgrade my catalyst or try xf86-video-radeonhd (im currently at work) ?
Trust me if I could rip out my "lovely" ATI from my sony vaio, I would trust me and go with nvidia instead.
Here's my problem after a few hours of fiddling I at least managed to get compiz up and running with a few plugins, but wobbly windows/alt tab/moving windows (very important to me) does not work at all. Everytime I execute any command on the wiki that's related to emerald/fusion icon/kde etc all my windows goes into some sort of static mode, can't move them around, can't do anything at all unless I execute: kwin --replace.
my dmesg log is full of this crap:
Code:
data!!! vma_start:0x7fef335b6000,handle:0xc5e76000 [fglrx:firegl_find_any_map] *ERROR* Invalid map handle!<3>[fglrx:drm_vm_open] *ERROR* map not found -> inconsistent kernel data!!! vma_start:0x7fef339ea000,handle:0xc29ec000
compiz fusion errors running fusion-icon (notice the errors I get from running wobbly windows)
Code:
* Detected Session: kde * Searching for installed applications... * No GLX_EXT_texture_from_pixmap with direct rendering context ... present with indirect rendering, exporting: LIBGL_ALWAYS_INDIRECT=1 * Using the GTK Interface * Starting Compiz ... executing: compiz --replace --sm-disable --ignore-desktop-hints ccp --indirect-rendering compiz (core) - Error: Plugin 'text' not loaded. compiz (ring) - Warn: No compatible text plugin found. compiz (cube) - Warn: Failed to load slide: freedesktop compiz (core) - Error: Plugin 'text' not loaded. compiz (group) - Warn: No compatible text plugin loaded.
Code:
Linux archbox 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 29 15:36:46 CEST 2009 x86_64 Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz GenuineIntel GNU/Linux
Code:
HARDWARE DETECT ver 5.5 (simple mode) Kernel : 2.6.29-ARCH CPU & Cache: Processor 0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz 2267MHz, 3072 KB Cache Processor 1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz 2267MHz, 3072 KB Cache Sound(a) : 82801I ICH9 Family HD Audio Controller module: snd-hda-intel Sound(a) : RV620 Audio device [Radeon HD 34xx Series] module: snd-hda-intel Video : Mobility Radeon HD 3400 Series server: Xorg (vesa) Driver : xf86-video-vesa module: - Monitor : Generic Monitor H: 28.0-96.0kHz V: 50.0-75.0Hz Mouse : Logitech, Inc. V220 Cordless Optical Mouse xtype: IMPS2 device: /dev/input/mice USB : 82801I ICH9 Family USB UHCI Controller #3 module: uhci_hcd USB2 : 82801I ICH9 Family USB2 EHCI Controller #1 module: ehci_hcd SD Slot : R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter module: sdhci-pci Ethernet : 88E8055 PCIE Gigabit Ethernet Controller module: sky2 Network : Wireless WiFi Link 5100 module: iwlagn Firewire : R5C832 IEEE 1394 Controller module: ohci1394
Code:
pacman -Q catalyst/catalyst-utils 9.4-1
Code:
KDE compiz-fusion group ccsm, compiz-fusion-plugins-extra, compiz-fusion-plugins-main, compizconfig-backend-kconfig, emerald, emerald-themes, fusion-icon
Code:
# ********************************************************************** # Module section -- this section is used to specify # which dynamically loadable modules to load. # ********************************************************************** # # ********************************************************************** # Files section. This allows default font and rgb paths to be set # ********************************************************************** # ********************************************************************** # Server flags section. # ********************************************************************** # ********************************************************************** # Monitor section # ********************************************************************** # Any number of monitor sections may be present # ********************************************************************** # Graphics device section # ********************************************************************** # Any number of graphics device sections may be present # ********************************************************************** # Screen sections # ********************************************************************** # Any number of screen sections may be present. Each describes # the configuration of a single screen. A single specific screen section # may be specified from the X server command line with the "-screen" # option. # ********************************************************************** # ServerLayout sections. # ********************************************************************** # Any number of ServerLayout sections may be present. Each describes # the way multiple screens are organised. A specific ServerLayout # section may be specified from the X server command line with the # "-layout" option. In the absence of this, the first section is used. # When now ServerLayout section is present, the first Screen section # is used alone. Section "ServerLayout" Identifier "Xorg Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Files" # Additional fonts: Locale, Gimp, TTF... # FontPath "/usr/share/lib/X11/fonts/latin2/75dpi" # FontPath "/usr/share/lib/X11/fonts/latin2/100dpi" # True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig! ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc:unscaled" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/75dpi" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/100dpi" #FontPath "/usr/share/fonts/PEX" #FontPath "/usr/share/fonts/cyrillic" #FontPath "/usr/share/fonts/Type1" #FontPath "/usr/share/fonts/ttf/western" #FontPath "/usr/share/fonts/ttf/decoratives" #FontPath "/usr/share/fonts/truetype" #FontPath "/usr/share/fonts/truetype/openoffice" #FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera" #FontPath "/usr/share/fonts/latex-ttf-fonts" #FontPath "/usr/share/fonts/defoma/CID" #FontPath "/usr/share/fonts/defoma/TrueType" EndSection Section "Module" Load "ddc" # ddc probing of monitor Load "dbe" Load "dri" Load "extmod" Load "glx" Load "bitmap" # bitmap-fonts #Load "type1" Load "freetype" #Load "record" Load "evdev" EndSection Section "ServerFlags" Option "AllowMouseOpenFail" "true" Option "AutoAddDevices" "true" Option "DontZap" "false" EndSection Section "InputDevice" Identifier "Touchpad" Driver "synaptics" Option "Device" "/dev/input/mouse0" Option "Protocol" "auto-dev" Option "LeftEdge" "130" Option "RightEdge" "840" Option "TopEdge" "130" Option "BottomEdge" "640" Option "FingerLow" "7" Option "FingerHigh" "8" Option "MaxTapTime" "180" Option "MaxTapMove" "110" Option "EmulateMidButtonTime" "75" Option "VertScrollDelta" "20" Option "HorizScrollDelta" "20" Option "MinSpeed" "0.25" Option "MaxSpeed" "0.50" Option "AccelFactor" "0.010" Option "EdgeMotionMinSpeed" "200" Option "EdgeMotionMaxSpeed" "200" Option "UpDownScrolling" "1" Option "CircularScrolling" "1" Option "CircScrollDelta" "0.1" Option "CircScrollTrigger" "2" Option "SHMConfig" "on" Option "Emulate3Buttons" "on" EndSection Section "Monitor" # Warning: This may fry old Monitors # Very conservative. May flicker. # VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default. Identifier "Monitor0" HorizSync 28.0 - 96.0 VertRefresh 50.0 - 75.0 Option "DPMS" "true" # HorizSync 28.0 - 78.0 # Warning: This may fry very old Monitors EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "Card0" Driver "radeonhd" VendorName "ATI Technologies Inc" BoardName "Mobility Radeon HD 3400 Series" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Group "video" Mode 0666 EndSection Section "Extensions" Option "Composite" "Enabled" EndSection
Comment