Announcement

Collapse
No announcement yet.

Problem Video with ubuntu

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Problem Video with ubuntu

    Hallo, i have problem with fullscreen in youtube and megavideo, i don't know the problem...

    I have Ubuntu 9.04 (jaunty)
    Video: Mobile Intel Graphic Accelerator x3100
    My driver is n? 2.6.3

    CAN YOU HELP ME PLEASE....??
    Last edited by bastianopoli; 02 June 2009, 04:41 PM.

  • #2
    If i write in terminal: sudo gedit /var/log/Xorg.0.log
    i read:

    X.Org X Server 1.6.0
    Release Date: 2009-2-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
    Current Operating System: Linux sebastiano-laptop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
    Build Date: 09 April 2009 02:10:02AM
    xorg-server 2:1.6.0-0ubuntu14 ([email protected])
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 20:58:02 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section. Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) | |-->Monitor "Configured Monitor"
    (**) | |-->Device "Configured Video Device"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
    (==) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    built-ins
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Loader magic: 0x3bc0
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.4
    X.Org Video Driver: 5.0
    X.Org XInput driver : 4.0
    X.Org Server Extension : 2.0
    (II) Loader running on linux
    (++) using VT number 7

    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x54000000/1048576, 0x40000000/268435456, I/O @ 0x00005110/8
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) System resource ranges:


    * -1 0 0xffffffff - 0xffffffff (0x1) MX
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
    (II) Matched intel from file name intel.ids
    (==) Matched intel for the autoconfigured driver
    (==) Assigned the driver to the xf86ConfigLayout
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.6.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 5.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    965GM, 965GME/GLE, G33, Q35, Q33,
    Mobile Intel? GM45 Express Chipset,
    Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:


    * -1 0 0xffffffff - 0xffffffff (0x1) MX
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
    [5] -1 0 0x00000000 - 0x00000000 (0x1) IX
    (II) resource ranges after probing:


    * -1 0 0xffffffff - 0xffffffff (0x1) MX
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
    [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS
    [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
    [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
    [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
    [8] -1 0 0x00000000 - 0x00000000 (0x1) IX
    [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS
    [10] 0 0 0x000003c0 - 0x000003df (0x20) IS
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 5.0
    (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0x40000000
    (--) intel(0): IO registers at addr 0x54000000
    (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
    (==) intel(0): Using EXA for acceleration
    (II) intel(0): 2 display pipes available.
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Configured Monitor
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CMO", prod id 5458
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
    (II) intel(0): No SDVO device found on SDVOC
    (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
    (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): Resizable framebuffer: not available (1 3)
    (II) intel(0): EDID vendor "CMO", prod id 5458
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    compiled for 1.6.0, module version = 2.4.0
    ABI class: X.Org Video Driver, version 5.0
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    CONTINUE...

    Comment


    • #3
      If i write in terminal: sudo gedit /var/log/Xorg.0.log
      then i can read the log:


      X.Org X Server 1.6.0
      Release Date: 2009-2-25
      X Protocol Version 11, Revision 0
      Build Operating System: Linux 2.6.24-23-server i686 Ubuntu
      Current Operating System: Linux sebastiano-laptop 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686
      Build Date: 09 April 2009 02:10:02AM
      xorg-server 2:1.6.0-0ubuntu14 ([email protected])
      Before reporting problems, check http://wiki.x.org
      to make sure that you have the latest version.
      Markers: (--) probed, (**) from config file, (==) default setting,
      (++) from command line, (!!) notice, (II) informational,
      (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
      (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 2 20:58:02 2009
      (==) Using config file: "/etc/X11/xorg.conf"
      (==) No Layout section. Using the first Screen section.
      (**) |-->Screen "Default Screen" (0)
      (**) | |-->Monitor "Configured Monitor"
      (**) | |-->Device "Configured Video Device"
      (==) Automatically adding devices
      (==) Automatically enabling devices
      (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
      Entry deleted from font path.
      (==) FontPath set to:
      /usr/share/fonts/X11/misc,
      /usr/share/fonts/X11/100dpi/:unscaled,
      /usr/share/fonts/X11/75dpi/:unscaled,
      /usr/share/fonts/X11/Type1,
      /usr/share/fonts/X11/100dpi,
      /usr/share/fonts/X11/75dpi,
      /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
      built-ins
      (==) ModulePath set to "/usr/lib/xorg/modules"
      (II) Cannot locate a core pointer device.
      (II) Cannot locate a core keyboard device.
      (II) The server relies on HAL to provide the list of input devices.
      If no devices become available, reconfigure HAL or disable AllowEmptyInput.
      (II) Loader magic: 0x3bc0
      (II) Module ABI versions:
      X.Org ANSI C Emulation: 0.4
      X.Org Video Driver: 5.0
      X.Org XInput driver : 4.0
      X.Org Server Extension : 2.0
      (II) Loader running on linux
      (++) using VT number 7

      (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 3, Mem @ 0x54000000/1048576, 0x40000000/268435456, I/O @ 0x00005110/8
      (II) Open ACPI successful (/var/run/acpid.socket)
      (II) System resource ranges:


      * -1 0 0xffffffff - 0xffffffff (0x1) MX
      [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


      [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
      [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
      [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
      [5] -1 0 0x00000000 - 0x00000000 (0x1) IX
      (II) LoadModule: "extmod"
      (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
      (II) Module extmod: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 2.0
      (II) Loading extension MIT-SCREEN-SAVER
      (II) Loading extension XFree86-VidModeExtension
      (II) Loading extension XFree86-DGA
      (II) Loading extension DPMS
      (II) Loading extension XVideo
      (II) Loading extension XVideo-MotionCompensation
      (II) Loading extension X-Resource
      (II) LoadModule: "dbe"
      (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
      (II) Module dbe: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 2.0
      (II) Loading extension DOUBLE-BUFFER
      (II) LoadModule: "glx"
      (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
      (II) Module glx: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      ABI class: X.Org Server Extension, version 2.0
      (==) AIGLX enabled
      (II) Loading extension GLX
      (II) LoadModule: "record"
      (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
      (II) Module record: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.13.0
      Module class: X.Org Server Extension
      ABI class: X.Org Server Extension, version 2.0
      (II) Loading extension RECORD
      (II) LoadModule: "dri"
      (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
      (II) Module dri: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      ABI class: X.Org Server Extension, version 2.0
      (II) Loading extension XFree86-DRI
      (II) LoadModule: "dri2"
      (II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
      (II) Module dri2: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      ABI class: X.Org Server Extension, version 2.0
      (II) Loading extension DRI2
      (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
      (II) Matched intel from file name intel.ids
      (==) Matched intel for the autoconfigured driver
      (==) Assigned the driver to the xf86ConfigLayout
      (II) LoadModule: "intel"
      (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
      (II) Module intel: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 2.6.3
      Module class: X.Org Video Driver
      ABI class: X.Org Video Driver, version 5.0
      (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
      i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
      E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
      965GM, 965GME/GLE, G33, Q35, Q33,
      Mobile Intel? GM45 Express Chipset,
      Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
      (II) Primary Device is: PCI 00@00:02:0
      (II) resource ranges after xf86ClaimFixedResources() call:


      * -1 0 0xffffffff - 0xffffffff (0x1) MX
      [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


      [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
      [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
      [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
      [5] -1 0 0x00000000 - 0x00000000 (0x1) IX
      (II) resource ranges after probing:


      * -1 0 0xffffffff - 0xffffffff (0x1) MX
      [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


      [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
      [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
      [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS
      [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS
      [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS
      [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
      [8] -1 0 0x00000000 - 0x00000000 (0x1) IX
      [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS
      [10] 0 0 0x000003c0 - 0x000003df (0x20) IS
      (II) Loading sub module "vgahw"
      (II) LoadModule: "vgahw"
      (II) Loading /usr/lib/xorg/modules//libvgahw.so
      (II) Module vgahw: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 0.1.0
      ABI class: X.Org Video Driver, version 5.0
      (II) intel(0): Creating default Display subsection in Screen section
      "Default Screen" for depth/fbbpp 24/32
      (==) intel(0): Depth 24, (--) framebuffer bpp 32
      (==) intel(0): RGB weight 888
      (==) intel(0): Default visual is TrueColor
      (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
      (--) intel(0): Chipset: "965GM"
      (--) intel(0): Linear framebuffer at 0x40000000
      (--) intel(0): IO registers at addr 0x54000000
      (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
      (==) intel(0): Using EXA for acceleration
      (II) intel(0): 2 display pipes available.
      (II) Loading sub module "ddc"
      (II) LoadModule: "ddc"
      (II) Module "ddc" already built-in
      (II) Loading sub module "i2c"
      (II) LoadModule: "i2c"
      (II) Module "i2c" already built-in
      (II) intel(0): Output VGA using monitor section Configured Monitor
      (II) intel(0): Output LVDS has no monitor section
      (II) intel(0): I2C bus "LVDSDDC_C" initialized.
      (II) intel(0): Attempting to determine panel fixed mode.
      (II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
      (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
      (II) intel(0): EDID vendor "CMO", prod id 5458
      (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
      (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
      (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
      (II) intel(0): No SDVO device found on SDVOC
      (II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
      (II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
      (II) intel(0): Output TV has no monitor section
      (II) intel(0): Resizable framebuffer: not available (1 3)
      (II) intel(0): EDID vendor "CMO", prod id 5458
      (II) intel(0): Output VGA disconnected
      (II) intel(0): Output LVDS connected
      (II) intel(0): Output TV disconnected
      (II) intel(0): Using exact sizes for initial modes
      (II) intel(0): Output LVDS using initial mode 1280x800
      (II) intel(0): detected 512 kB GTT.
      (II) intel(0): detected 7676 kB stolen memory.
      (==) intel(0): video overlay key set to 0x101fe
      (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
      (==) intel(0): DPI set to (96, 96)
      (II) Loading sub module "fb"
      (II) LoadModule: "fb"
      (II) Loading /usr/lib/xorg/modules//libfb.so
      (II) Module fb: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 1.0.0
      ABI class: X.Org ANSI C Emulation, version 0.4
      (II) Loading sub module "exa"
      (II) LoadModule: "exa"
      (II) Loading /usr/lib/xorg/modules//libexa.so
      (II) Module exa: vendor="X.Org Foundation"
      compiled for 1.6.0, module version = 2.4.0
      ABI class: X.Org Video Driver, version 5.0
      (II) Loading sub module "ramdac"
      (II) LoadModule: "ramdac"
      (II) Module "ramdac" already built-in
      (II) intel(0): Comparing regs from server start up to After PreInit
      CONTINUE...
      Last edited by bastianopoli; 02 June 2009, 04:38 PM.

      Comment


      • #4
        (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
        (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
        (WW) intel(0): PP_STATUS after: on, ready, sequencing on
        (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000207
        (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
        (WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
        (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c00c0
        (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
        (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
        (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
        (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
        (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
        (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
        (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00404000
        (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
        (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
        (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
        (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
        (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
        (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
        (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
        (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
        (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
        (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
        (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
        (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710087
        (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x6b405140
        (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
        (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
        (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
        (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
        (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
        (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
        (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
        (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
        (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
        (==) Depth 24 pixmap format is 32 bpp
        (II) do I need RAC? No, I don't.
        (II) resource ranges after preInit:


        * -1 0 0xffffffff - 0xffffffff (0x1) MX
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX


        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX
        [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS(OprD)
        [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
        [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS(OprD)
        [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX
        [8] -1 0 0x00000000 - 0x00000000 (0x1) IX
        [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS(OprU)
        [10] 0 0 0x000003c0 - 0x000003df (0x20) IS(OprU)
        (II) intel(0): Kernel reported 238592 total, 1 used
        (II) intel(0): I830CheckAvailableMemory: 954364 kB available
        (WW) intel(0): DRI2 requires UXA
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenByBusid: Searching for BusID pci:0000:00:02.0
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: open result is 11, (OK)
        drmOpenByBusid: drmOpenMinor returns 11
        drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
        (II) [drm] loaded kernel module for "i915" driver.
        (II) [drm] DRM interface version 1.3
        (II) [drm] DRM open master succeeded.
        (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
        (II) intel(0): [drm] framebuffer mapped by ddx driver
        (II) intel(0): [drm] added 1 reserved context for kernel
        (II) intel(0): X context handle = 0x1
        (II) intel(0): [drm] installed DRM signal handler
        (**) intel(0): Framebuffer compression disabled
        (**) intel(0): Tiling enabled
        (==) intel(0): VideoRam: 262144 KB
        (II) intel(0): Attempting memory allocation with tiled buffers.
        (II) intel(0): Tiled allocation successful.
        (II) intel(0): [drm] Registers = 0x54000000
        (II) intel(0): [dri] visual configs initialized
        (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
        (II) EXA(0): Offscreen pixmap area of 19660800 bytes
        (II) EXA(0): Driver registered support for the following operations:
        (II) Solid
        (II) Copy
        (II) Composite (RENDER acceleration)
        (==) intel(0): Backing store disabled
        (==) intel(0): Silken mouse enabled
        (II) intel(0): Initializing HW Cursor
        (II) intel(0): [DRI] installation complete
        (II) intel(0): Disable render standby.
        (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0ed40000 (pgoffset 60736)
        (II) intel(0): Fixed memory allocation layout:
        (II) intel(0): 0x00000000-0x00000fff: power context (4 kB)
        (II) intel(0): 0x0077f000: end of stolen memory
        (II) intel(0): 0x0077f000-0x0ed3ffff: DRI memory manager (235268 kB)
        (II) intel(0): 0x0ed40000-0x0fffffff: exa offscreen (19200 kB)
        (II) intel(0): 0x10000000: end of aperture
        (II) intel(0): BO memory allocation layout:
        (II) intel(0): 0x0077f000: start of memory manager
        (II) intel(0): 0x0079f000-0x00ddefff: depth buffer (6400 kB) Y tiled
        (II) intel(0): 0x00f9f000-0x015defff: back buffer (6400 kB) X tiled
        (II) intel(0): 0x0179f000-0x01ddefff: front buffer (6400 kB) X tiled
        (II) intel(0): 0x01f9f000-0x01f9ffff: overlay registers (4 kB)
        (II) intel(0): 0x01fa0000-0x01fa9fff: HW cursors (40 kB)
        (II) intel(0): 0x0ed40000: end of memory manager
        (II) intel(0): using SSC reference clock of 96 MHz
        (II) intel(0): Selecting standard 18 bit TMDS pixel format.
        (II) intel(0): Output configuration:
        (II) intel(0): Pipe A is off
        (II) intel(0): Display plane A is now disabled and connected to pipe A.
        (II) intel(0): Pipe B is on
        (II) intel(0): Display plane B is now enabled and connected to pipe B.
        (II) intel(0): Output VGA is connected to pipe none
        (II) intel(0): Output LVDS is connected to pipe B
        (II) intel(0): Output TV is connected to pipe none
        (II) intel(0): [drm] mapped front buffer at 0x4179f000, handle = 0x4179f000
        (II) intel(0): [drm] mapped back buffer at 0x40f9f000, handle = 0x40f9f000
        (II) intel(0): [drm] mapped depth buffer at 0x4079f000, handle = 0x4079f000
        (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
        (II) intel(0): DPMS enabled
        (==) intel(0): Intel XvMC decoder disabled
        (II) intel(0): Set up textured video
        (II) intel(0): Set up overlay video
        (II) intel(0): direct rendering: XF86DRI Enabled
        (--) RandR disabled
        (II) Initializing built-in extension Generic Event Extension
        (II) Initializing built-in extension SHAPE
        (II) Initializing built-in extension MIT-SHM
        (II) Initializing built-in extension XInputExtension
        (II) Initializing built-in extension XTEST
        (II) Initializing built-in extension BIG-REQUESTS
        (II) Initializing built-in extension SYNC
        (II) Initializing built-in extension XKEYBOARD
        (II) Initializing built-in extension XC-MISC
        (II) Initializing built-in extension SECURITY
        (II) Initializing built-in extension XINERAMA
        (II) Initializing built-in extension XFIXES
        (II) Initializing built-in extension RENDER
        (II) Initializing built-in extension RANDR
        (II) Initializing built-in extension COMPOSITE
        (II) Initializing built-in extension DAMAGE
        (II) AIGLX: Screen 0 is not DRI2 capable
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: open result is 12, (OK)
        drmOpenByBusid: Searching for BusID pci:0000:00:02.0
        drmOpenDevice: node name is /dev/dri/card0
        drmOpenDevice: open result is 12, (OK)
        drmOpenByBusid: drmOpenMinor returns 12
        drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
        (II) AIGLX: enabled GLX_SGI_make_current_read
        (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
        (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
        (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
        (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
        (II) GLX: Initialized DRI GL provider for screen 0
        (II) intel(0): Setting screen physical size to 331 x 207
        (II) config/hal: Adding input device AT Translated Set 2 keyboard
        (II) LoadModule: "evdev"
        (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
        (II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.6.0, module version = 2.1.1
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 4.0
        CONTINUE...

        Comment


        • #5
          (**) AT Translated Set 2 keyboard: always reports core events
          (**) AT Translated Set 2 keyboard: Device: "/dev/input/event5"
          (II) AT Translated Set 2 keyboard: Found keys
          (II) AT Translated Set 2 keyboard: Configuring as keyboard
          (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
          (**) Option "xkb_rules" "evdev"
          (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
          (**) Option "xkb_model" "pc105"
          (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
          (**) Option "xkb_layout" "it"
          (**) AT Translated Set 2 keyboard: xkb_layout: "it"
          (II) config/hal: Adding input device AlpsPS/2 ALPS GlidePoint
          (II) LoadModule: "synaptics"
          (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
          (II) Module synaptics: vendor="X.Org Foundation"
          compiled for 1.6.0, module version = 0.99.3
          Module class: X.Org XInput Driver
          ABI class: X.Org XInput driver, version 4.0
          (II) Synaptics touchpad driver version 0.99.3
          (**) Option "Device" "/dev/input/event11"
          (II) AlpsPS/2 ALPS GlidePoint: x-axis range 0 - 1023
          (II) AlpsPS/2 ALPS GlidePoint: y-axis range 0 - 767
          (II) AlpsPS/2 ALPS GlidePoint: pressure range 0 - 127
          (II) AlpsPS/2 ALPS GlidePoint: finger width range 0 - 0
          (II) AlpsPS/2 ALPS GlidePoint: buttons: left right middle
          (II) ALPS touchpad detected: AlpsPS/2 ALPS GlidePoint. Applying customised settings...
          (--) AlpsPS/2 ALPS GlidePoint touchpad found
          (**) AlpsPS/2 ALPS GlidePoint: always reports core events
          (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS GlidePoint" (type: TOUCHPAD)
          (**) AlpsPS/2 ALPS GlidePoint: (accel) keeping acceleration scheme 1
          (**) AlpsPS/2 ALPS GlidePoint: (accel) filter chain progression: 2.00
          (**) AlpsPS/2 ALPS GlidePoint: (accel) filter stage 0: 20.00 ms
          (**) AlpsPS/2 ALPS GlidePoint: (accel) set acceleration profile 0
          (--) AlpsPS/2 ALPS GlidePoint touchpad found
          (II) config/hal: Adding input device PS/2 Mouse
          (**) PS/2 Mouse: always reports core events
          (**) PS/2 Mouse: Device: "/dev/input/event10"
          (II) PS/2 Mouse: Found 3 mouse buttons
          (II) PS/2 Mouse: Found x and y relative axes
          (II) PS/2 Mouse: Configuring as mouse
          (**) PS/2 Mouse: YAxisMapping: buttons 4 and 5
          (**) PS/2 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
          (II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
          (**) PS/2 Mouse: (accel) keeping acceleration scheme 1
          (**) PS/2 Mouse: (accel) filter chain progression: 2.00
          (**) PS/2 Mouse: (accel) filter stage 0: 20.00 ms
          (**) PS/2 Mouse: (accel) set acceleration profile 0
          (II) config/hal: Adding input device Video Bus
          (**) Video Bus: always reports core events
          (**) Video Bus: Device: "/dev/input/event8"
          (II) Video Bus: Found keys
          (II) Video Bus: Configuring as keyboard
          (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
          (**) Option "xkb_rules" "evdev"
          (**) Video Bus: xkb_rules: "evdev"
          (**) Option "xkb_model" "pc105"
          (**) Video Bus: xkb_model: "pc105"
          (**) Option "xkb_layout" "it"
          (**) Video Bus: xkb_layout: "it"
          (II) config/hal: Adding input device Macintosh mouse button emulation
          (**) Macintosh mouse button emulation: always reports core events
          (**) Macintosh mouse button emulation: Device: "/dev/input/event4"
          (II) Macintosh mouse button emulation: Found 3 mouse buttons
          (II) Macintosh mouse button emulation: Found x and y relative axes
          (II) Macintosh mouse button emulation: Configuring as mouse
          (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
          (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
          (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
          (**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
          (**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
          (**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
          (**) Macintosh mouse button emulation: (accel) set acceleration profile 0
          (II) config/hal: Adding input device HID 062a:0000
          (**) HID 062a:0000: always reports core events
          (**) HID 062a:0000: Device: "/dev/input/event7"
          (II) HID 062a:0000: Found 3 mouse buttons
          (II) HID 062a:0000: Found x and y relative axes
          (II) HID 062a:0000: Configuring as mouse
          (**) HID 062a:0000: YAxisMapping: buttons 4 and 5
          (**) HID 062a:0000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
          (II) XINPUT: Adding extended input device "HID 062a:0000" (type: MOUSE)
          (**) HID 062a:0000: (accel) keeping acceleration scheme 1
          (**) HID 062a:0000: (accel) filter chain progression: 2.00
          (**) HID 062a:0000: (accel) filter stage 0: 20.00 ms
          (**) HID 062a:0000: (accel) set acceleration profile 0
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1IT'S328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): EDID vendor "CMO", prod id 5458
          (II) intel(0): Printing DDC gathered Modelines:
          (II) intel(0): Modeline "1280x800"x0.0 71.00 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.3 kHz)
          (II) intel(0): EDID vendor "CMO", prod id 5458



          IT'S ALL RIGHT? CAN YOU HELP ME PLEASE??

          Comment


          • #6
            Stop shouting and use pastebin for stuff like that. There is a reason you can't make a post with a milion characters in it...

            Comment


            • #7
              you might want to check out ubuntuforums.org. you'll probably get faster help there.

              Comment


              • #8
                I don't think you have mentioned what the actual problem is, ie what is not working the way you expect.
                Test signature

                Comment

                Working...
                X