Originally posted by AJSB
View Post
Announcement
Collapse
No announcement yet.
DDR3 Memory Scaling Performance With AMD's Athlon 5350
Collapse
X
-
-
Originally posted by AJSB View PostPS In the mITX ASUS Mobo besides base APU clock , you can adjust APU `Multiplier`...check if also exists in your MoBo that option...*if* exists and allows more than 20.5 , you can bump CPU and GPU frequencies...go in small steps and makes tests and check temps...
Comment
-
Originally posted by dungeon View PostYep APU Multiplier is there and can be set to more then 20.5. I setted it now to 21.0 and that is 50 MHz more. Together with the APU Frequency setted to 105, i running now at 2206 MHz
Default = @ 2050 MHz 60.5 fps
21.0 multiplier and 105 freq = @ 2206 MHz 88.5 fps
Comment
-
Originally posted by halfmanhalfamazing View PostI can't help but be curious (even though the chips appear to be in different classes) how Kaveri and Kabini stack up against each other.
I have not seen benchmarks out there at all anywhere on this. Maybe I just missed them. If not, might make a good Phoronix article.
Comment
-
Originally posted by dungeon View PostBenchmarking Openarena 0.8.8 @ 1024x768 now to see what is gain from this OC and yay these two makes a good performance difference
Default = @ 2050 MHz 60.5 fps
21.0 multiplier and 105 freq = @ 2206 MHz 88.5 fps
Default = @ 2050 MHz 35.7 fps
21.0 multiplier and 105 freq = @ 2206 MHz 56.7 fps
With HyperZ enabled:
Default = @ 2050 MHz 56.7 fps
21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps
Comment
-
Originally posted by dungeon View PostWith HyperZ enabled:
Default = @ 2050 MHz 56.7 fps
21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps
Michael maybe also want to slightly overclock his Athlon 5350 .
Comment
-
AJSB asks: yes it runs with the same temperature , but one sad thing is it just allows 21.0 multiplier as maximum .
So that is it from me about overcloking this athlon i think i couldn't gain more from this hardware an memory , but even that makes excelant difference 20.05>21.0 multiplier and 100>105 freq all stable for meLast edited by dungeon; 13 April 2014, 07:17 AM.
Comment
-
Originally posted by dungeon View PostI don't expected this @ 1920x1080 too , but this APU has excelent overclocked performance
Default = @ 2050 MHz 35.7 fps
21.0 multiplier and 105 freq = @ 2206 MHz 56.7 fps
With HyperZ enabled:
Default = @ 2050 MHz 56.7 fps
21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps
Comment
Comment