Tweet
I've downloaded and attempted to install the latest Catalyst drivers for my card. I'm running Ubuntu hardy and the drivers on the repo don't give very good video playback (jerky) and cause wine to crash...
The open ati drivers give flawless video playback but rubbish 3D framerates!
So, here I am trying to get the new drivers working with no avail.
Unfortunately, the fglrx drivers refuse to work... and everything reverts to mesa
The problem seems to start here:
xorg.conf
EDIT :: In fact... looking into it a bit, I don't even have the directory "/etc/dri", let alone anything in it... does that sound right? Have I broken something?
The open ati drivers give flawless video playback but rubbish 3D framerates!
So, here I am trying to get the new drivers working with no avail.
Unfortunately, the fglrx drivers refuse to work... and everything reverts to mesa
The problem seems to start here:
Code:
drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: Searching for BusID PCI:1:5:0 drmOpenDevice: node name is /dev/dri/card0 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card1 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card2 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card3 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card4 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card5 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card6 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card7 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card8 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card9 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card10 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card11 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card12 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card13 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 drmOpenDevice: node name is /dev/dri/card14 drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: open result is -1, (No such device or address) drmOpenDevice: Open failed drmOpenByBusid: drmOpenMinor returns -6 (WW) fglrx(0): Failed to open DRM connection (II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0x1c000000, MCFBSize = 0x4000000) (--) fglrx(0): Video RAM: 65536 kByte, Type: DDR SGRAM / SDRAM (II) fglrx(0): PCIE card detected (WW) fglrx(0): board is an unknown third party board, chipset is supported (II) Loading sub module "ddc" (II) LoadModule: "ddc"(II) Module "ddc" already built-in (II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000 (II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: CMO Model: 1409 Serial#: 0 (II) fglrx(0): Year: 2005 Week: 21 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Digital Display Input (II) fglrx(0): Max H-Image Size [cm]: horiz.: 30 vert.: 19 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): No DPMS capabilities specified; RGB/Color Display (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.590 redY: 0.340 greenX: 0.317 greenY: 0.535 (II) fglrx(0): blueX: 0.150 blueY: 0.121 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 71.0 MHz Image Size: 303 x 190 mm (II) fglrx(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0 (II) fglrx(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0 (II) fglrx(0): N141I1-L03 (II) fglrx(0): CMO (II) fglrx(0): N141I1-L03 (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff000daf091400000000 (II) fglrx(0): 150f0103801e13780a04859757518926 (II) fglrx(0): 1f505400000001010101010101010101 (II) fglrx(0): 010101010101bc1b00a0502017303020 (II) fglrx(0): 36002fbe10000018000000fe004e3134 (II) fglrx(0): 3149312d4c30330a2020000000fe0043 (II) fglrx(0): 4d4f0a202020202020202020000000fe (II) fglrx(0): 004e31343149312d4c30330a202000b4 (II) fglrx(0): End of Display1 EDID data -------------------- (WW) fglrx(0): Only one display is connnected,so single mode is enabled (II) fglrx(0): Primary Controller - LCD on internal LVDS (II) fglrx(0): Internal Desktop Setting: 0x00000001 (II) fglrx(0): POWERplay version 3. 2 power states available: (II) fglrx(0): 1. 301/301MHz @ 60Hz [enable load balancing] (II) fglrx(0): 2. 100/133MHz @ 60Hz [low voltage] (==) fglrx(0): Qbs is not supported in this release. Disabled. (==) fglrx(0): FAST_SWAP disabled (==) fglrx(0): PseudoColor visuals disabled (==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0) (==) fglrx(0): Center Mode is disabled (==) fglrx(0): TMDS coherent mode is enabled (II) fglrx(0): Total of 14 modes found for primary display. ...some stuff.... (II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0 (II) fglrx(0): detected X.org 7.1.0.90 (EE) fglrx(0): atiddxDriScreenInit failed, GPS not been initialized. (WW) fglrx(0): *********************************************** (WW) fglrx(0): * DRI initialization failed! * (WW) fglrx(0): * (maybe driver kernel module missing or bad) * (WW) fglrx(0): * 2D acceleraton available (MMIO) * (WW) fglrx(0): * no 3D acceleration available * (WW) fglrx(0): ********************************************* *
Code:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen[0]-0" 0 0
InputDevice "Synaptics Touchpad"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dri"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizEdgeScroll" "0"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]-0"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]-0"
Driver "fglrx"
Option "UseFastTLS" "2"
# BusID "PCI:1:5:0"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]-0"
Device "aticonfig-Device[0]-0"
Monitor "aticonfig-Monitor[0]-0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
EDIT :: In fact... looking into it a bit, I don't even have the directory "/etc/dri", let alone anything in it... does that sound right? Have I broken something?
Comment