Hi all.
It's been several months I'm experiencing complete system freeze with nVidia drivers on my Gentoo machine. I've tried drivers above 173.14.22 and all of them make the system freeze as soon as X starts. The screen turns black, no image, goes power saving and I have to hard reset the computer as it cannot even be reached from the network.
Here are the first and last lines of Xorg log file:
My machine has an ASUS P5QL Pro motherboard and, as you can see, a GeForce 8800 GT. Has anyone got a possible explanation?
Thanks in advance.
It's been several months I'm experiencing complete system freeze with nVidia drivers on my Gentoo machine. I've tried drivers above 173.14.22 and all of them make the system freeze as soon as X starts. The screen turns black, no image, goes power saving and I have to hard reset the computer as it cannot even be reached from the network.
Here are the first and last lines of Xorg log file:
Code:
X.Org X Server 1.6.5 Release Date: 2009-10-11 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.31-zen9 x86_64 Current Operating System: Linux luke 2.6.32-zen3 #2 ZEN SMP Mon Dec 28 00:01:49 CET 2009 x86_64 Build Date: 13 December 2009 11:32:25PM ... (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32 (==) NVIDIA(0): RGB weight 888 (==) NVIDIA(0): Default visual is TrueColor (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0) (**) Dec 28 00:44:01 NVIDIA(0): Enabling RENDER acceleration (II) Dec 28 00:44:01 NVIDIA(0): Support for GLX with the Damage and Composite X extensions is (II) Dec 28 00:44:01 NVIDIA(0): enabled. (II) Dec 28 00:44:02 NVIDIA(0): NVIDIA GPU GeForce 8800 GT (G92) at PCI:1:0:0 (GPU-0) (--) Dec 28 00:44:02 NVIDIA(0): Memory: 524288 kBytes (--) Dec 28 00:44:02 NVIDIA(0): VideoBIOS: 62.92.31.00.3d (II) Dec 28 00:44:02 NVIDIA(0): Detected PCI Express Link width: 16X (--) Dec 28 00:44:02 NVIDIA(0): Interlaced video modes are supported on this GPU (--) Dec 28 00:44:02 NVIDIA(0): Connected display device(s) on GeForce 8800 GT at PCI:1:0:0: (--) Dec 28 00:44:02 NVIDIA(0): Philips 220CW (DFP-0) (--) Dec 28 00:44:02 NVIDIA(0): Philips 220CW (DFP-0): 330.0 MHz maximum pixel clock (--) Dec 28 00:44:02 NVIDIA(0): Philips 220CW (DFP-0): Internal Dual Link TMDS (II) Dec 28 00:44:02 NVIDIA(0): Assigned Display Device: DFP-0 (==) Dec 28 00:44:02 NVIDIA(0): (==) Dec 28 00:44:02 NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select" (==) Dec 28 00:44:02 NVIDIA(0): will be used as the requested mode. (==) Dec 28 00:44:02 NVIDIA(0): (II) Dec 28 00:44:02 NVIDIA(0): Validated modes: (II) Dec 28 00:44:02 NVIDIA(0): "nvidia-auto-select" (II) Dec 28 00:44:02 NVIDIA(0): Virtual screen size determined to be 1680 x 1050 (--) Dec 28 00:44:02 NVIDIA(0): DPI set to (90, 91); computed from "UseEdidDpi" X config (--) Dec 28 00:44:02 NVIDIA(0): option (==) Dec 28 00:44:02 NVIDIA(0): Enabling 32-bit ARGB GLX visuals. (--) Depth 24 pixmap format is 32 bpp (II) do I need RAC? No, I don't. (II) resource ranges after preInit: [0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B] [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B] [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B] [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B] [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B] [5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B] (II) Dec 28 00:44:02 NVIDIA(0): Initialized GPU GART. (II) Dec 28 00:44:02 NVIDIA(0): Setting mode "nvidia-auto-select"
Thanks in advance.
Comment