OpenSUSE 10.3 + 7.11/8.43.1

[Mota_boy]

Well This time i don`t get black screen when i boot my pc.
In konqueror there reads as i should be on id on driver-card.
But fglrxinfo says:

display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.1)

Not as it should.

I haven`t further tested how this driver works, but i would like hear other people opinion and experience on openSUSE 10.3 and this latest 7.11/8.43.1 or with some other distro also.

Ps. Sorry my rusty english

[adamk]

The 8.43.3 driver works fine here under opensuse 10.3 How did you install it? I recommend using the one-click method:

http://opensuse-community.org/ati.ymp

[Mota_boy]

I installed the kernel and that other package by using Yast, and then in console sax2 -r -m 0=fglrx , the computer regonize the card but not 100% sense fglrxinfo= was what iposted earlier.
Well i try that method and come back tell what did happen after that.

[Mota_boy]

Well i installed the latest driver by one-click-installer, but first mouse didn`t work, i got fixed that and now it works, in konqueror there reads what it should read by meaning the card.
But fglrxinfo says:

display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.1)

And xorg.xonf is:

Version: 8.1
# Contact: Marcus Schaefer <[email protected]>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (8.1)
# PLEASE DO NOT EDIT THIS FILE!
#

Section "Files"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
EndSection

Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection

Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "fi"
Option "XkbModel" "pc102"
Option "XkbRules" "xfree86"
EndSection

Section "InputDevice"
Driver "evdev"
Identifier "Mouse[1]"
Option "Buttons" "10"
Option "InputFashion" "Mouse"
Option "Name" "Logitech USB R*"
Option "Protocol" "event"
Option "SendCoreEvents" "on"
Option "Vendor" "Sysp"
Option "ZaxisMapping" "4 5"
EndSection


Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
HorizSync 31-64
Identifier "Monitor[0]"
ModelName "1280X1024@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 50-60
UseModes "Modes[0]"
EndSection


Section "Modes"
Identifier "Modes[0]"
EndSection


Section "Device"
BoardName "Framebuffer Graphics"
Driver "fbdev"
Identifier "Device[0]"
VendorName "VESA"
EndSection


Section "Screen"
SubSection "Display"
Depth 15
Modes "default"
EndSubSection
SubSection "Display"
Depth 16
Modes "default"
EndSubSection
SubSection "Display"
Depth 24
Modes "default"
EndSubSection
SubSection "Display"
Depth 8
Modes "default"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection


Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Screen "Screen[0]"
EndSection


Section "DRI"
Group "video"
Mode 0660
EndSection

So as you can see the driver doesn`t work on me, by the way adamk would you show your xorg.conf
Does anybody have any good tip, thanks for answer already

Ps. and sorry my rusty english