HELP!
I have reached my limit with this. I have a Panasonic CF-51 laptop with a 256MB X1300 card in it. I previously had FC5 installed and everything was excellent. Recently, I completely reinstalled the system with F7 and then F8. With F7 and F8, I can't get the graphical installer to work. When the install gets to the point where I should be picking keyboard layout, etc..., I get a blank screen and the system seems to be hung. CLT-ALT-BACKSPACE does nothing, etc... Only choice is to hard reboot.
So I installed in text mode, then I used livna to get kmod-fglrx installed. Rebooted and get taken to a command line login. Running start X sends me back to the blank screen and everything is hung again.
When I run fglrxinfo, I get an error: "Unable to open Display :0"! My Xorg log file shows no errors and the fglrx module seems to have loaded fine. I will include the log files below.
Kernel version: Linux version 2.6.23.1-49.fc8. I have not done any yum updates, etc... so everything is stock F8 except for the video drivers.
I appreciate any ideas/help that you can give. Also, I can post up the dmesg output or any other log files if they're helpfull. Thanks!
I have reached my limit with this. I have a Panasonic CF-51 laptop with a 256MB X1300 card in it. I previously had FC5 installed and everything was excellent. Recently, I completely reinstalled the system with F7 and then F8. With F7 and F8, I can't get the graphical installer to work. When the install gets to the point where I should be picking keyboard layout, etc..., I get a blank screen and the system seems to be hung. CLT-ALT-BACKSPACE does nothing, etc... Only choice is to hard reboot.
So I installed in text mode, then I used livna to get kmod-fglrx installed. Rebooted and get taken to a command line login. Running start X sends me back to the blank screen and everything is hung again.
When I run fglrxinfo, I get an error: "Unable to open Display :0"! My Xorg log file shows no errors and the fglrx module seems to have loaded fine. I will include the log files below.
Kernel version: Linux version 2.6.23.1-49.fc8. I have not done any yum updates, etc... so everything is stock F8 except for the video drivers.
I appreciate any ideas/help that you can give. Also, I can post up the dmesg output or any other log files if they're helpfull. Thanks!
Code:
X Window System Version 1.3.0 Release Date: 19 April 2007 X Protocol Version 11, Revision 0, Release 1.3 Build Operating System: Fedora Core 7 Red Hat, Inc. Current Operating System: Linux dooklap 2.6.23.1-49.fc8 #1 SMP Thu Nov 8 21:41:26 EST 2007 i686 Build Date: 17 October 2007 Build ID: xorg-x11-server 1.3.0.0-33.fc8 Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 11 17:02:58 2007 (==) Using config file: "/etc/X11/xorg.conf" (==) ServerLayout "Default Layout" (**) |-->Screen "aticonfig-Screen[0]" (0) (**) | |-->Monitor "aticonfig-Monitor[0]" (**) | |-->Device "aticonfig-Device[0]" (**) |-->Input Device "Keyboard0" (**) |-->Input Device "Synaptics" (II) No default mouse found, adding one (**) |-->Input Device "<default pointer>" (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins (==) RgbPath set to "/usr/share/X11/rgb" (==) ModulePath set to "/usr/lib/xorg/modules" (II) Open ACPI successful (/var/run/acpid.socket) (II) Loader magic: 0x820b5c0 (II) Module ABI versions: X.Org ANSI C Emulation: 0.3 X.Org Video Driver: 1.2 X.Org XInput driver : 0.7 X.Org Server Extension : 0.3 X.Org Font Renderer : 0.5 (II) Loader running on linux (II) LoadModule: "pcidata" (II) Loading /usr/lib/xorg/modules//libpcidata.so (II) Module pcidata: vendor="X.Org Foundation" compiled for 1.3.0, module version = 1.0.0 ABI class: X.Org Video Driver, version 1.2 (--) using VT number 7 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:00:0: chip 8086,27a0 card 10f7,8338 rev 03 class 06,00,00 hdr 00 (II) PCI: 00:01:0: chip 8086,27a1 card 0000,0000 rev 03 class 06,04,00 hdr 01 (II) PCI: 00:1b:0: chip 8086,27d8 card 10f7,8338 rev 02 class 04,03,00 hdr 00 (II) PCI: 00:1c:0: chip 8086,27d6 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:2: chip 8086,27d4 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1c:3: chip 8086,27d0 card 0000,0000 rev 02 class 06,04,00 hdr 81 (II) PCI: 00:1d:0: chip 8086,27c8 card 10f7,8338 rev 02 class 0c,03,00 hdr 80 (II) PCI: 00:1d:1: chip 8086,27c9 card 10f7,8338 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:2: chip 8086,27ca card 10f7,8338 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:3: chip 8086,27cb card 10f7,8338 rev 02 class 0c,03,00 hdr 00 (II) PCI: 00:1d:7: chip 8086,27cc card 10f7,8338 rev 02 class 0c,03,20 hdr 00 (II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev e2 class 06,04,01 hdr 01 (II) PCI: 00:1f:0: chip 8086,27b9 card 10f7,8338 rev 02 class 06,01,00 hdr 80 (II) PCI: 00:1f:2: chip 8086,27c4 card 10f7,8338 rev 02 class 01,01,80 hdr 00 (II) PCI: 00:1f:3: chip 8086,27da card 10f7,8338 rev 02 class 0c,05,00 hdr 00 (II) PCI: 01:00:0: chip 1002,7149 card 10f7,8338 rev 00 class 03,00,00 hdr 00 (II) PCI: 03:00:0: chip 8086,4222 card 8086,1000 rev 02 class 02,80,00 hdr 00 (II) PCI: 04:00:0: chip 11ab,4362 card 10f7,8338 rev 19 class 02,00,00 hdr 00 (II) PCI: 05:00:0: chip 1180,0476 card 4000,0000 rev b1 class 06,07,00 hdr 82 (II) PCI: 05:00:1: chip 1180,0476 card 4800,0000 rev b1 class 06,07,00 hdr 82 (II) PCI: 05:00:2: chip 1180,0552 card 10f7,8338 rev 06 class 0c,00,10 hdr 80 (II) PCI: 05:00:3: chip 1180,0822 card 10f7,8338 rev 15 class 08,05,00 hdr 80 (II) PCI: End of PCI scan (II) Intel Bridge workaround enabled (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set) (II) Bus 0 I/O range: [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B] (II) Bus 0 non-prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) Bus 0 prefetchable memory range: [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B] (II) PCI-to-PCI bridge: (II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x001c (VGA_EN is set) (II) Bus 1 I/O range: [0] -1 0 0x00002000 - 0x000020ff (0x100) IX[B] [1] -1 0 0x00002400 - 0x000024ff (0x100) IX[B] [2] -1 0 0x00002800 - 0x000028ff (0x100) IX[B] [3] -1 0 0x00002c00 - 0x00002cff (0x100) IX[B] (II) Bus 1 non-prefetchable memory range: [0] -1 0 0xf0000000 - 0xf00fffff (0x100000) MX[B] (II) Bus 1 prefetchable memory range: [0] -1 0 0xe0000000 - 0xefffffff (0x10000000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 2: bridge is at (0:28:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared) (II) PCI-to-PCI bridge: (II) Bus 3: bridge is at (0:28:2), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 3 non-prefetchable memory range: [0] -1 0 0xf0100000 - 0xf01fffff (0x100000) MX[B] (II) PCI-to-PCI bridge: (II) Bus 4: bridge is at (0:28:3), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 4 I/O range: [0] -1 0 0x00003000 - 0x000030ff (0x100) IX[B] [1] -1 0 0x00003400 - 0x000034ff (0x100) IX[B] [2] -1 0 0x00003800 - 0x000038ff (0x100) IX[B] [3] -1 0 0x00003c00 - 0x00003cff (0x100) IX[B] (II) Bus 4 non-prefetchable memory range: [0] -1 0 0xf0200000 - 0xf02fffff (0x100000) MX[B] (II) Bus 4 prefetchable memory range: [0] -1 0 0x90000000 - 0x900fffff (0x100000) MX[B] (II) Subtractive PCI-to-PCI bridge: (II) Bus 5: bridge is at (0:30:0), (0,5,10), BCTRL: 0x0004 (VGA_EN is cleared) (II) Bus 5 I/O range: [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] [2] -1 0 0x00004800 - 0x000048ff (0x100) IX[B] [3] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B] (II) Bus 5 non-prefetchable memory range: [0] -1 0 0xf0300000 - 0xf03fffff (0x100000) MX[B] (II) Bus 5 prefetchable memory range: [0] -1 0 0x88000000 - 0x8fffffff (0x8000000) MX[B] (II) PCI-to-ISA bridge: (II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set) (II) PCI-to-CardBus bridge: (II) Bus 6: bridge is at (5:0:0), (5,6,6), BCTRL: 0x0580 (VGA_EN is cleared) (II) Bus 6 I/O range: [0] -1 0 0x00004000 - 0x000040ff (0x100) IX[B] [1] -1 0 0x00004400 - 0x000044ff (0x100) IX[B] (II) Bus 6 prefetchable memory range: [0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B] (II) PCI-to-CardBus bridge: (II) Bus 7: bridge is at (5:0:1), (5,7,10), BCTRL: 0x0580 (VGA_EN is cleared) (II) Bus 7 I/O range: [0] -1 0 0x00004800 - 0x000048ff (0x100) IX[B] [1] -1 0 0x00004c00 - 0x00004cff (0x100) IX[B] (II) Bus 7 prefetchable memory range: [0] -1 0 0x8c000000 - 0x8fffffff (0x4000000) MX[B] (--) PCI:*(1:0:0) ATI Technologies Inc M52 [ATI Mobility Radeon X1300] rev 0, Mem @ 0xe0000000/28, 0xf0000000/16, I/O @ 0x2000/8
Comment