Hello,
I just join this forum which is very cool and helfull. Thanks to everyone for this.
However, i just updrage for FC5 to FC6 on my laptop (Dell Latitude D610) with ATI Radeon X300 and i have some trouble making ATI driver works.
I try both 8.30.3 and 8.29.6 without any success => still have a fireglcontrolpanel error.
Here is the (part1) ouput of:
# ./ati-driver-installer-8.30.3.run --buildpkg Fedora/FC6
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.30.3............................................ .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..........................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Fedora/FC6
install: cannot stat `fireglcontrolpanel': No such file or directory
Package build failed!
Package build utility output:
Building target platforms: i386
Building for target i386
Executing(%prep): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
+ LANG=C
+ export LANG
+ unset DISPLAY
+ exit 0
Executing(%install): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root
+ '[' -d /etc/ld.so.conf.d ']'
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cat
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cat
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cp -pR /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/etc /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/lib /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/usr /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root
+ find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/doc -type f -perm 0555 -exec chmod 0644 '{}' ';'
+ find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root -type f -perm 0555 -exec chmod 0755 '{}' ';'
+ export AS_USER=y
+ AS_USER=y
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ bash make.sh verbose
ATI module generator V 2.0
==========================
initializing...
cat: /lib/modules/2.6.18-1.2798.fc6/build/include/linux/version-*.h: No such file or directory
OsRelease=2.6.18-1.2798.fc6
major=2
minor=6
patch=18
extra=-1.2798.fc6
SMP=1
smp=-SMP
iii=
AGP=1
CC=gcc
cc_version=
cleaning...
patching 'highmem.h'...
assuming new VMA API since we do have kernel 2.6.x...
Assuming default VMAP API
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
CC [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:460: warning: initialization from incompatible pointer type
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function 'firegl_stub_open':
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:583: warning: assignment discards qualifiers from pointer target type
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function '__ke_smp_call_function':
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3902: warning: passing argument 1 of 'smp_call_function' from incompatible pointer type
LD [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST
WARNING: could not find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/.libfglrx_ip.a.GCC4.cmd for /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC4
CC /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
build succeeded with return value 0
duplicating results into driver repository...
done.
==============================
You must change your working directory to /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6/extra
+ install -D -m 0644 fglrx.ko /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6/extra/fglrx/fglrx.ko
+ rm -rf /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ /usr/lib/rpm/find-debuginfo.sh /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
extracting debug info from /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/lib/dri/atiogl_a_dri.so
extracting debug info from /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/lib/dri/fglrx_dri.so
extracting debug info from
... i will post part II just below
I just join this forum which is very cool and helfull. Thanks to everyone for this.
However, i just updrage for FC5 to FC6 on my laptop (Dell Latitude D610) with ATI Radeon X300 and i have some trouble making ATI driver works.
I try both 8.30.3 and 8.29.6 without any success => still have a fireglcontrolpanel error.
Here is the (part1) ouput of:
# ./ati-driver-installer-8.30.3.run --buildpkg Fedora/FC6
Creating directory fglrx-install
Verifying archive integrity... All good.
Uncompressing ATI Proprietary Linux Driver-8.30.3............................................ .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. .................................................. ..........................................
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
Generating package: Fedora/FC6
install: cannot stat `fireglcontrolpanel': No such file or directory
Package build failed!
Package build utility output:
Building target platforms: i386
Building for target i386
Executing(%prep): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ LANG=C
+ export LANG
+ unset DISPLAY
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chown -Rhf root .
++ /usr/bin/id -u
+ '[' 0 = 0 ']'
+ /bin/chgrp -Rhf root .
+ /bin/chmod -Rf a+rX,u+w,g-w,o-w .
+ exit 0
Executing(%build): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
+ LANG=C
+ export LANG
+ unset DISPLAY
+ exit 0
Executing(%install): /bin/sh -e /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/rpm-tmp.81355
+ umask 022
+ cd /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD
+ cd ATI-fglrx-8.30.3
+ LANG=C
+ export LANG
+ unset DISPLAY
+ rm -rf /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root
+ '[' -d /etc/ld.so.conf.d ']'
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/etc/ld.so.conf.d /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cat
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/applications /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cat
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ cp -pR /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/etc /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/lib /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3/usr /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root
+ find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/share/doc -type f -perm 0555 -exec chmod 0644 '{}' ';'
+ find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root -type f -perm 0555 -exec chmod 0755 '{}' ';'
+ export AS_USER=y
+ AS_USER=y
+ pushd /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ bash make.sh verbose
ATI module generator V 2.0
==========================
initializing...
cat: /lib/modules/2.6.18-1.2798.fc6/build/include/linux/version-*.h: No such file or directory
OsRelease=2.6.18-1.2798.fc6
major=2
minor=6
patch=18
extra=-1.2798.fc6
SMP=1
smp=-SMP
iii=
AGP=1
CC=gcc
cc_version=
cleaning...
patching 'highmem.h'...
assuming new VMA API since we do have kernel 2.6.x...
Assuming default VMAP API
doing Makefile based build for kernel 2.6.x and higher
make -C /lib/modules/2.6.18-1.2798.fc6/build SUBDIRS=/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
CC [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:460: warning: initialization from incompatible pointer type
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function 'firegl_stub_open':
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:583: warning: assignment discards qualifiers from pointer target type
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function '__ke_smp_call_function':
/tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3902: warning: passing argument 1 of 'smp_call_function' from incompatible pointer type
LD [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.o
Building modules, stage 2.
MODPOST
WARNING: could not find /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/.libfglrx_ip.a.GCC4.cmd for /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC4
CC /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
LD [M] /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
build succeeded with return value 0
duplicating results into driver repository...
done.
==============================
You must change your working directory to /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx
and then call ./make_install.sh in order to install the built module.
==============================
+ mkdir -p /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6/extra
+ install -D -m 0644 fglrx.ko /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6/extra/fglrx/fglrx.ko
+ rm -rf /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/lib/modules/fglrx
+ popd
/tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
+ /usr/lib/rpm/find-debuginfo.sh /tmp/ATI-fglrx-8.30.3-1-20289-root/BUILD/ATI-fglrx-8.30.3
extracting debug info from /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/lib/dri/atiogl_a_dri.so
extracting debug info from /tmp/ATI-fglrx-8.30.3-1-20289-root/tmp/ATI-fglrx-8.30.3-1.fc6-root-root/usr/lib/dri/fglrx_dri.so
extracting debug info from
... i will post part II just below
Comment