Hello,
I have recently purchased a acer revo r3600.
It comes with a initial partition layout of:
sda1 hd0,0 Primary 1: 2GB Active blank
sda2 hd0,1 Primary 2: 2GB Linux partition, Squashfs.
sda3 hd0,2: Primary 3 4GB Splashtop - Hidden FAT32
I have done lots of partition experimentation and from what I've seen the 2gb linux partition is not need to run the splashtop. However its removal does cause the boot os button / Revobuild button to be greyed out.
I can also move the splashtop primary partition to be a logical drive in an an extended partition and it still works perfectly.
Having read some of the bugs on this forum I am happy to say it supports the 1680 by 1050 off the bat and I can add .sqx files that work without having to apply any hacks to checking system.
The question:
I use grub4dos in my MBR and boot many different OSs on this device. I would like to be able to include splashdot in my grub menu as the bios loader forces a 10 second timeout which I don't know how to change as yet and its too long.
I assume this is possible if you are using grub in the usb stick to start things off rather than the bios on the system. I've looked into that but is slightly above my head at the moment.
Could you advise me what I would need to include in the menu would be very helpful or tell me what I want to archieve is not possible so I can stop trying for the time being ^_^.
I tried something along the line of
rootnoverify (hd0,5)
(hd0,5)/splash.sys/kernel.bin
to no avail.
Ooo in case hd0,5 confuses better mention I've repartitioned the disk alot current table below
MBR: Grub4dos
sda1 hd0,0 Primary 1: 30GB Windows 7 Ultimate 32 bit
sda2 hd0,1 Primary 2: 2GB Linux partition, Squashfs part of revoboot.
sda3 hd0,2 Primary 3: 30GB Windows XPl
sda4 hd0,3 Extended:
sda5 hd0,4 Logical 1: 2GB Grub4dos menu, GDLR, grub installer, various isos for booting e.g. acronis disk director, gpart
sda6 hd0,5 Logical 2: 4GB Splashtop - Hidden FAT32 (moved from sda3)
sda7 hd0,6 Logical 3: 2GB Linux Swap 1 for XBMCbuntu
sda8 hd0,7 Logical 4: 2GB Linux Swap 2 for Full Ubuntu (Two swaps for various reasons)
sda9 hd0,8 Logical 5: 5GB XBMCubuntu (Cut down version of linux running XBMC)
sda10 hd0,9 Logical 6: 15GB Ubuntu Linux
sda11 hd0,10 Logical 7: 10GB Reserved for some quick booting linux with a browser to try later.
sda12 hd0,11 Logical 8: X GB Remaining space for storage,
Thank you in advance for any advice.
Crispy
I have recently purchased a acer revo r3600.
It comes with a initial partition layout of:
sda1 hd0,0 Primary 1: 2GB Active blank
sda2 hd0,1 Primary 2: 2GB Linux partition, Squashfs.
sda3 hd0,2: Primary 3 4GB Splashtop - Hidden FAT32
I have done lots of partition experimentation and from what I've seen the 2gb linux partition is not need to run the splashtop. However its removal does cause the boot os button / Revobuild button to be greyed out.
I can also move the splashtop primary partition to be a logical drive in an an extended partition and it still works perfectly.
Having read some of the bugs on this forum I am happy to say it supports the 1680 by 1050 off the bat and I can add .sqx files that work without having to apply any hacks to checking system.
The question:
I use grub4dos in my MBR and boot many different OSs on this device. I would like to be able to include splashdot in my grub menu as the bios loader forces a 10 second timeout which I don't know how to change as yet and its too long.
I assume this is possible if you are using grub in the usb stick to start things off rather than the bios on the system. I've looked into that but is slightly above my head at the moment.
Could you advise me what I would need to include in the menu would be very helpful or tell me what I want to archieve is not possible so I can stop trying for the time being ^_^.
I tried something along the line of
rootnoverify (hd0,5)
(hd0,5)/splash.sys/kernel.bin
to no avail.
Ooo in case hd0,5 confuses better mention I've repartitioned the disk alot current table below
MBR: Grub4dos
sda1 hd0,0 Primary 1: 30GB Windows 7 Ultimate 32 bit
sda2 hd0,1 Primary 2: 2GB Linux partition, Squashfs part of revoboot.
sda3 hd0,2 Primary 3: 30GB Windows XPl
sda4 hd0,3 Extended:
sda5 hd0,4 Logical 1: 2GB Grub4dos menu, GDLR, grub installer, various isos for booting e.g. acronis disk director, gpart
sda6 hd0,5 Logical 2: 4GB Splashtop - Hidden FAT32 (moved from sda3)
sda7 hd0,6 Logical 3: 2GB Linux Swap 1 for XBMCbuntu
sda8 hd0,7 Logical 4: 2GB Linux Swap 2 for Full Ubuntu (Two swaps for various reasons)
sda9 hd0,8 Logical 5: 5GB XBMCubuntu (Cut down version of linux running XBMC)
sda10 hd0,9 Logical 6: 15GB Ubuntu Linux
sda11 hd0,10 Logical 7: 10GB Reserved for some quick booting linux with a browser to try later.
sda12 hd0,11 Logical 8: X GB Remaining space for storage,
Thank you in advance for any advice.
Crispy
Comment