Announcement

Collapse
No announcement yet.

screen only 2/3 of display ?!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • screen only 2/3 of display ?!

    hi everyone!

    I finally got again my notebook-tft working! (Option ExactModeTimingsDVI and Option ConnectedMonitors DFP-0) BUT: now I've got a big black bar at the right and a small white bar at the bottom ?!

    I took a modeline from nv driver that worked quite ok, but a bit slow, but resolution was ok
    I put the modeline in xorg.conf, but now i don't know how to enable it. i think this would solve the problem with the black and white bars.

    Xorg.0.log says: No valid modes for "1280x800"; removing
    ... Unable to validate any modes --> nvidia-auto-select
    virtual screen size determined to be 1024x768
    and exactly THAT is the problem. i have to force him to use 1280x800.

    please tell me how to do.

    thanks

    EDIT: the modeline "nv" gave me was: "1280x800" 68.90 1280 0 0 0 800 0 0 0 (i put that into monitor section, but he doesn't recognize)

  • #2
    I think i found the fitting modelines on the internet:

    (**) fglrx(0): *Mode "1280x800": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x800"x60.0 68.90 1280 1312 1344 1408 800 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): *Mode "1280x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1280x768"x60.0 68.90 1280 1312 1344 1408 768 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): *Mode "1024x768": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "1024x768"x60.0 68.90 1024 1312 1344 1408 768 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): *Mode "800x600": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "800x600"x60.0 68.90 800 1312 1344 1408 600 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): *Mode "640x480": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x480"x60.0 68.90 640 1312 1344 1408 480 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): Default mode "640x400": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "640x400"x60.0 68.90 640 1312 1344 1408 400 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): Default mode "512x384": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "512x384"x60.0 68.90 512 1312 1344 1408 384 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): Default mode "400x300": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "400x300"x60.0 68.90 400 1312 1344 1408 300 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): Default mode "320x240": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "320x240"x60.0 68.90 320 1312 1344 1408 240 801 804 816 +hsync +vsync (48.9 kHz)
    (**) fglrx(0): Default mode "320x200": 68.9 MHz (scaled from 0.0 MHz), 48.9 kHz, 60.0 Hz
    (II) fglrx(0): Modeline "320x200"x60.0 68.90 320 1312 1344 1408 200 801 804 816 +hsync +vsync (48.9 kHz)

    Comment


    • #3
      It works ! It works !!!!!!!!

      EDIT: now another question: how can i generate my own EDID file with the modeline information ?

      EDIT2: WOOHOO!!! JUST CALL ME "GOD!" I DID IT!
      I took Powerstrip under Windows and tried to update the EDID of my display. Powerstrip said that the EDID header is corrupt or the checksum. So I chose "Repair" and it was successful

      haa.. I LOVE MYSELF
      Last edited by benneque; 18 March 2009, 03:34 AM.

      Comment

      Working...
      X