hi guys,
I've an asrock dual sata II mainboard, with 2 sata and 1 sataII port, and fedora 12 installed on one of the sata hds.
my problem is that one of the sata hds is always detected as "jmicron_raid_member", although I do NOT have any raid configured. (windows works...).
Even if I change the sata ports the same hd is always detected as "jimicron raid". However I can mount the first partition of this hd, but not the 2nd.
It's /dev/sdb. If I try to mount /dev/sdb2 it says there is no /dev/sdb2.
Mounting UUID="D6C8A022C8A002BB" ( = /dev/sdb1) works.
Can I get the 2nd partition mounted somehow?
Thanks in advantage!
I've an asrock dual sata II mainboard, with 2 sata and 1 sataII port, and fedora 12 installed on one of the sata hds.
my problem is that one of the sata hds is always detected as "jmicron_raid_member", although I do NOT have any raid configured. (windows works...).
Even if I change the sata ports the same hd is always detected as "jimicron raid". However I can mount the first partition of this hd, but not the 2nd.
Code:
# fdisk -l Device Boot Start End Blocks Id System /dev/sdb1 * 1 6528 52428800 7 HPFS/NTFS /dev/sdb2 6528 38914 260139008 7 HPFS/NTFS Disk /dev/dm-0: 100.0 GB, 100025761792 bytes 255 heads, 63 sectors/track, 12160 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0xd05b4856 Device Boot Start End Blocks Id System /dev/dm-0p1 * 1 6528 52428800 7 HPFS/NTFS /dev/dm-0p2 6528 38914 260139008 7 HPFS/NTFS Disk /dev/dm-1: 53.7 GB, 53687091200 bytes 255 heads, 63 sectors/track, 6527 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x6e697373 This doesn't look like a partition table Probably you selected the wrong device. Device Boot Start End Blocks Id System /dev/dm-1p1 ? 120528 234814 918008208 4f QNX4.x 3rd part Partition 1 does not end on cylinder boundary. /dev/dm-1p2 ? 119381 153271 272218546+ 73 Unknown Partition 2 does not end on cylinder boundary. /dev/dm-1p3 ? 113202 147075 272087568 2b Unknown Partition 3 does not end on cylinder boundary. /dev/dm-1p4 ? 177064 177067 27487 61 SpeedStor Partition 4 does not end on cylinder boundary.
Code:
# blkid /dev/mapper/jmicron_kbg4p1: LABEL="Windows 7" UUID="D6C8A022C8A002BB" TYPE="ntfs" /dev/sdb: TYPE="jmicron_raid_member"
Can I get the 2nd partition mounted somehow?
Thanks in advantage!
Comment