Announcement

Collapse
No announcement yet.

Test failed to run properly

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • lynmmtan
    started a topic Test failed to run properly

    Test failed to run properly

    Hi,

    I have installed
    1) pts/build-linux-kernel
    2) pts/systester
    3) pts/stresscpu2

    When i run the above tests in my working platform (Intel Atom E660, Linux Fedora Core 14), there are no results captured and it says:

    The test did not produce a result.
    Final: 0

    The following tests failed to properly run:


    Anyone knows what's missing?

    Thanks in advance.

  • Hafiz ur Rahman
    replied
    I am also facing the same problem using the latest version of PTS.

    Can any body help? below is the details of my test.


    ================================================== ==============================
    Phoronix Test Suite v6.6.1
    If desired, enter a new description below to better describe this result set / system configuration under test.
    Press ENTER to proceed without changes.
    ================================================== ==============================

    Current Description: Xen HVM domU 4.6.1-xs125300 testing on Ubuntu 16.04 via the Phoronix Test Suite.

    New Description:

    Sensors To Be Logged:
    - CPU Usage (Summary)

    ========================================
    SysTester (Run 1 of 1)
    ========================================


    Test Run Command: cd /home/hafizpcmain/.phoronix-test-suite/installed-tests/pts/systester-1.0.0/ && ./systester-cli -gausslg 4M -threads 8 2>&1


    System Stability Tester. CLI Version 1.1.0.
    Distributed under the terms of the GPL v2.
    Type -help for command line options.
    http://systester.sourceforge.net

    Intel(R) Xeon(R) CPU E5-2620 0 @ 2.00GHz
    Running Linux x86_64 at 2000 MHz
    System memory: 1975 MB
    Hardware Threads: 7
    GMP version: GMP 6.1.0
    Compiled for 64 bit environments

    Operating mode: Bench
    Calculating 4194304 digits of pi
    -----------------------------------------
    Turn: 1 Errors: 0 Threads: 8
    Running For: 0.000s ChkErr: 0
    Failed After: No fail yet
    -----------------------------------------
    Loop Digits State Time
    ---------------------------------
    0 1 N/A 1.203s
    1 2 N/A 1.959s
    2 4 N/A 2.899s
    3 8 N/A 3.933s
    4 16 N/A 4.843s
    5 32 N/A 5.793s
    6 64 N/A 6.744s
    7 128 N/A 7.736s
    8 256 N/A 8.732s
    9 512 N/A 9.648s
    10 1K N/A 10.629s
    11 2K N/A 11.578s
    12 4K N/A 12.583s
    13 8K N/A 13.606s
    14 16K N/A 14.610s
    15 32K N/A 15.635s
    16 64K N/A 16.659s
    17 128K N/A 17.631s
    18 256K N/A 18.655s
    19 512K N/A 19.700s
    20 1M N/A 20.712s
    21 2M N/A 21.673s
    22 4M N/A 22.366s
    Checksum validation...Gauss PASSED!!!


    Result Parsing Line Before Hint: Checksum validation...


    Result Line:



    Result Parsing Line Before Hint: Checksum validation...


    Result Line:



    Test Result Value:


    The test run did not produce a result.


    Log File At: /home/hafizpcmain/.phoronix-test-suite/installed-tests/pts/systester-1.0.0/systester-1.0.0-1485061824-1.log


    ################################################## ##############################
    SysTester:
    Algorithm Choice: Gauss-Legendre algorithm - Digits To Calculate: 4 Million Digits - Number of Threads: 8 threads


    Average: 0 Seconds
    ################################################## ##############################



    The following tests failed to properly run:

    - pts/systester-1.0.0: Algorithm Choice: Gauss-Legendre algorithm - Digits To Calculate: 4 Million Digits - Number of Threads: 8 threads



    Finishing System Sensor Monitoring Process

    Leave a comment:


  • Michael
    replied
    Originally posted by gml96 View Post
    hello,I have someproblems about pts/systester.

    in pts/systester*/result-defined.xml
    <?xml version="1.0"?>
    <!--Phoronix Test Suite v3.0.0a3 (Iveland) [ http://www.phoronix-test-suite.com/ ]-->
    <PhoronixTestSuite>
    <ResultsParser>
    <OutputTemplate>22 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    <ResultsParser>
    <OutputTemplate>21 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    </PhoronixTestSuite>

    ---------------------------------------------------------------------------------------------
    <LineBeforeHint>Checksum validation...</LineBeforeHint> ?
    when I ran this test, the result line is vain ;

    when i ran phoronix-test-suite debug-run systester ,
    I can read the debug-message above :
    -------------------------------------------------------------------------------------------
    Operating mode: Bench
    Calculating 4194304 digits of pi
    -----------------------------------------
    Turn: 1 Errors: 0 Threads: 1
    Running For: 0.000s ChkErr: 0
    Failed After: No fail yet
    -----------------------------------------
    Loop Digits State Time
    ---------------------------------
    0 1 N/A 3.258s
    1 2 N/A 4.980s
    2 4 N/A 7.052s
    3 8 N/A 9.127s
    4 16 N/A 11.198s
    5 32 N/A 13.271s
    6 64 N/A 15.352s
    7 128 N/A 17.753s
    8 256 N/A 20.132s
    9 512 N/A 22.510s
    10 1K N/A 24.910s
    11 2K N/A 27.311s
    12 4K N/A 29.712s
    13 8K N/A 32.113s
    14 16K N/A 34.515s
    15 32K N/A 36.920s
    16 64K N/A 39.324s
    17 128K N/A 41.685s
    18 256K N/A 44.046s
    19 512K N/A 46.390s
    20 1M N/A 48.710s
    21 2M N/A 50.969s
    22 4M N/A 53.338s
    Checksum validation...Gauss PASSED!!!

    Result Line:
    Test Result Value:

    ----------------------------------------------------------------------
    why ?
    I think the " <LineBeforeHint>Checksum validation...</LineBeforeHint> " should be changed to " <LineAfterHint>Checksum validation...</LineAfterHint>" 。
    I change this,but this test-result is also vain .
    i feel fuzzle.
    thanks for your reply.
    Hi so this change doesn't help you for getting a result?

    Leave a comment:


  • gml96
    replied
    pts/systester the result is vain

    Originally posted by Michael View Post
    What version of PTS are you using? If you are running 4.6 or newer there should be better diagnostics.
    hello,I have someproblems about pts/systester.

    in pts/systester*/result-defined.xml
    <?xml version="1.0"?>
    <!--Phoronix Test Suite v3.0.0a3 (Iveland) [ http://www.phoronix-test-suite.com/ ]-->
    <PhoronixTestSuite>
    <ResultsParser>
    <OutputTemplate>22 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    <ResultsParser>
    <OutputTemplate>21 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    </PhoronixTestSuite>

    ---------------------------------------------------------------------------------------------
    <LineBeforeHint>Checksum validation...</LineBeforeHint> ?
    when I ran this test, the result line is vain ;

    when i ran phoronix-test-suite debug-run systester ,
    I can read the debug-message above :
    -------------------------------------------------------------------------------------------
    Operating mode: Bench
    Calculating 4194304 digits of pi
    -----------------------------------------
    Turn: 1 Errors: 0 Threads: 1
    Running For: 0.000s ChkErr: 0
    Failed After: No fail yet
    -----------------------------------------
    Loop Digits State Time
    ---------------------------------
    0 1 N/A 3.258s
    1 2 N/A 4.980s
    2 4 N/A 7.052s
    3 8 N/A 9.127s
    4 16 N/A 11.198s
    5 32 N/A 13.271s
    6 64 N/A 15.352s
    7 128 N/A 17.753s
    8 256 N/A 20.132s
    9 512 N/A 22.510s
    10 1K N/A 24.910s
    11 2K N/A 27.311s
    12 4K N/A 29.712s
    13 8K N/A 32.113s
    14 16K N/A 34.515s
    15 32K N/A 36.920s
    16 64K N/A 39.324s
    17 128K N/A 41.685s
    18 256K N/A 44.046s
    19 512K N/A 46.390s
    20 1M N/A 48.710s
    21 2M N/A 50.969s
    22 4M N/A 53.338s
    Checksum validation...Gauss PASSED!!!

    Result Line:
    Test Result Value:

    ----------------------------------------------------------------------
    why ?
    I think the " <LineBeforeHint>Checksum validation...</LineBeforeHint> " should be changed to " <LineAfterHint>Checksum validation...</LineAfterHint>" 。
    I change this,but this test-result is also vain .
    i feel fuzzle.
    thanks for your reply.

    Leave a comment:


  • gml96
    replied
    pts/systester the result is vain

    my phoronix-test-suite is 4.8.3
    hello,I have someproblems about pts/systester.

    in result-defined.xml
    <?xml version="1.0"?>
    <!--Phoronix Test Suite v3.0.0a3 (Iveland) [ http://www.phoronix-test-suite.com/ ]-->
    <PhoronixTestSuite>
    <ResultsParser>
    <OutputTemplate>22 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    <ResultsParser>
    <OutputTemplate>21 4M N/A #_RESULT_#</OutputTemplate>
    <LineBeforeHint>Checksum validation...</LineBeforeHint>
    <StripResultPostfix>s</StripResultPostfix>
    </ResultsParser>
    </PhoronixTestSuite>

    ---------------------------------------------------------------------------------------------
    <LineBeforeHint>Checksum validation...</LineBeforeHint> ?
    when I ran this test, the result line is vain ;

    when i ran phoronix-test-suite debug-run systester ,
    I can read the debug-message above :
    -------------------------------------------------------------------------------------------
    Operating mode: Bench
    Calculating 4194304 digits of pi
    -----------------------------------------
    Turn: 1 Errors: 0 Threads: 1
    Running For: 0.000s ChkErr: 0
    Failed After: No fail yet
    -----------------------------------------
    Loop Digits State Time
    ---------------------------------
    0 1 N/A 3.258s
    1 2 N/A 4.980s
    2 4 N/A 7.052s
    3 8 N/A 9.127s
    4 16 N/A 11.198s
    5 32 N/A 13.271s
    6 64 N/A 15.352s
    7 128 N/A 17.753s
    8 256 N/A 20.132s
    9 512 N/A 22.510s
    10 1K N/A 24.910s
    11 2K N/A 27.311s
    12 4K N/A 29.712s
    13 8K N/A 32.113s
    14 16K N/A 34.515s
    15 32K N/A 36.920s
    16 64K N/A 39.324s
    17 128K N/A 41.685s
    18 256K N/A 44.046s
    19 512K N/A 46.390s
    20 1M N/A 48.710s
    21 2M N/A 50.969s
    22 4M N/A 53.338s
    Checksum validation...Gauss PASSED!!!

    Result Line:
    Test Result Value:

    ----------------------------------------------------------------------
    why ?
    I think the " <LineBeforeHint>Checksum validation...</LineBeforeHint> " should be changed to " <LineAfterHint>Checksum validation...</LineAfterHint>" 。
    I change this,but this test-result is also vain .
    i feel fuzzle.
    thanks for your reply.

    Leave a comment:


  • Michael
    replied
    What version of PTS are you using? If you are running 4.6 or newer there should be better diagnostics.

    Leave a comment:


  • linuxmaiden
    replied
    Test failed to run properly

    I also had this happen running pts/x11perf. I also couldn't run pts/apitrace on the same machine. I was able to run pts/x11perf on my linux mint however.

    Leave a comment:

Working...
X