Announcement

Collapse
No announcement yet.

iperf parsing the receiver result instead of sender

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • iperf parsing the receiver result instead of sender

    From iperf-3.7 the output changed and it shows the receiver and sender. But the results-definition hasn't changed. is this correct or should it be reporting the 8314 Mbits/s from the sender?

    Test Complete. Summary Results:
    [ ID] Interval Transfer Bitrate Jitter Lost/Total Datagrams
    [ 9] 0.00-30.00 sec 7.46 GBytes 2137 Mbits/sec 0.000 ms 0/1001500 (0%) sender
    [ 9] 0.00-30.00 sec 5.00 GBytes 1431 Mbits/sec 0.016 ms 433198/1001500 (43%) receiver
    [ 11] 0.00-30.00 sec 7.35 GBytes 2105 Mbits/sec 0.000 ms 0/986660 (0%) sender
    [ 11] 0.00-30.00 sec 4.93 GBytes 1411 Mbits/sec 0.017 ms 424495/986659 (43%) receiver
    [ 13] 0.00-30.00 sec 7.17 GBytes 2053 Mbits/sec 0.000 ms 0/962430 (0%) sender
    [ 13] 0.00-30.00 sec 4.80 GBytes 1375 Mbits/sec 0.017 ms 411882/962429 (43%) receiver
    [ 15] 0.00-30.00 sec 7.05 GBytes 2020 Mbits/sec 0.000 ms 0/946740 (0%) sender
    [ 15] 0.00-30.00 sec 4.72 GBytes 1350 Mbits/sec 0.018 ms 407442/946739 (43%) receiver
    [SUM] 0.00-30.00 sec 29.0 GBytes 8314 Mbits/sec 0.000 ms 0/3897330 (0%) sender
    [SUM] 0.00-30.00 sec 19.4 GBytes 5567 Mbits/sec 0.017 ms 1677017/3897327 (43%) receiver
    CPU Utilization: local/sender 51.3% (3.3%u/48.0%s), remote/receiver 6.7% (0.6%u/6.1%s)

    the output from a debug-run :

    Template Line: [SUM] 0.00-10.00 sec 314 MBytes #_RESULT_# Mbits/sec 0 sender


    Result Parsing Search Key: "SUM"


    Result Line: [SUM] 0.00-30.00 sec 19.4 GBytes 5567 Mbits/sec 0.017 ms 1677017/3897327 (43%) receiver


    Test Result Parser Returning: 5567


Working...
X