Announcement

Collapse
No announcement yet.

Discussing Nouveau Driver Power Management

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • phoronix
    started a topic Discussing Nouveau Driver Power Management

    Discussing Nouveau Driver Power Management

    Phoronix: Discussing Nouveau Driver Power Management

    While the Nouveau driver is now beginning to be trimmed down a bit as non-KMS support is being dropped, this free software NVIDIA driver will be gaining some new code in the form of power management support. Power management for NVIDIA hardware in the Nouveau driver stack is still early on, but a patch is being prepared and a discussion has been initiated how to handle the power management controls for this driver...

    http://www.phoronix.com/vr.php?view=Nzg3Mg

  • Melcar
    replied
    Originally posted by mistvieh View Post
    That is simply wrong. With nouveau the gpu and vram stay at the bios' default clockspeed. In my case with my quadro nvs 140m that is power level 1, so it's far from optimal. And that is why my power consumption is 2-3W higher than with the nvidia driver (that's a lot on a laptop).

    That makes sense. Radeon also lacks any sort of clock switching, so it uses the BIOS default clocks/voltage (Boot-up frequencies), which are considerably higher than the regular low power state.

    Leave a comment:


  • mistvieh
    replied
    Originally posted by not.sure View Post
    That's odd though. nouveau ppl said that nouveau runs the GPU exclusively in the lowest power level possible, like vesa or nv drivers.
    Mhm, could be interrupts and wake-ups to the CPU or so...?!
    That is simply wrong. With nouveau the gpu and vram stay at the bios' default clockspeed. In my case with my quadro nvs 140m that is power level 1, so it's far from optimal. And that is why my power consumption is 2-3W higher than with the nvidia driver (that's a lot on a laptop).

    Leave a comment:


  • puntarenas
    replied
    The GTX 280 definitely doesn't switch to the lowest power profile (and/or enable clock gating?!) without a driver present, so maybe Nouoveau people were talking about other Nvidia architectures.

    For example, if I enter the mainboard BIOS I can see the same idle consumption and it doesnt't drop until booting into Windows or Fedora with proprietary Nvidia drivers installed.

    Leave a comment:


  • not.sure
    replied
    Originally posted by puntarenas View Post
    To my surprise I found nouveau working pretty well with Fedora 12. Unfortunately power consumption of my system with a GTX 280 is 28W higher than with the proprietary driver, so I switched back until Power Management is ready.
    That's odd though. nouveau ppl said that nouveau runs the GPU exclusively in the lowest power level possible, like vesa or nv drivers.
    Mhm, could be interrupts and wake-ups to the CPU or so...?!

    Leave a comment:


  • puntarenas
    replied
    To my surprise I found nouveau working pretty well with Fedora 12. Unfortunately power consumption of my system with a GTX 280 is 28W higher than with the proprietary driver, so I switched back until Power Management is ready.

    Leave a comment:


  • ChrisIrwin
    replied
    I recently got a new laptop with an nvidia graphics card. I previously had an Intel. I'm looking forward to using nouveau so I can get things like xrandr back.

    Leave a comment:


  • bugmenot
    replied
    I really hope that there will be a very good infrastructure that will be used for every free driver.

    Leave a comment:


  • mistvieh
    replied
    Yay I cant await powermanagement coming to nouveau. The lack of it is the only thing stopping me from using it exclusively.

    Leave a comment:

Working...
X