-
Yeah, if you're not playing high-end 3D games, the radeon 6.9.0 + Xserver 1.5 + Mesa 7.1 combination is already a good replace for (and sometimes [2D for example] even better than) fglrx if you're having R5xx in my opinion. Compiz, KDE4, Videos, basic 3D stuff, it all runs wonderful! -
Originally posted by c0un7d0wn View Post
i've finally made it....
kde4 + compiz and kde4-window-decorator + render accel + 8 compilation threads i've been able to get about 500fps in glxgears with one processor at 24% load and the other at 5%...
i've removed completely xorg packages and rebuild everything from git (including libraries, server, drivers) and then rebuild entirely kde4 and compiz and now the performance is about as i was expecting. the only issues are with kaffeine when running on compiz to be a very big resource sucker and thus not allowing me to do other stuff while trying to watch videos on compiz and firefox behaving a little slow with scrolling.
the performance without compiz is exactly the same (and this is a real surprise to me) but this time the video playback and the firefox scrolling is quite fluid and i can also do some compiling at the same time.
thanks to all who have tried to help me out and especially to the ones that have made this possible, amd and all the devs that are working on the driver.
thanks very much for the work you've done in the last months.Leave a comment:
-
Actually the clockscaling is on. I am using ondemand governor.
glxgears @800mhz: ~24% cpu usage
glxgears @2gig: ~15% cpu usageCode:$ glxgears 2497 frames in 5.0 seconds = 499.386 FPS 2640 frames in 5.0 seconds = 527.863 FPS 2600 frames in 5.0 seconds = 519.892 FPS 2623 frames in 5.0 seconds = 524.598 FPS
btw, i have stopped building from git, instead i'm using xorg-edgers ppa on hardy amd64. The only difference with hand built git i see is lower mem usage.Code:$ glxgears 3422 frames in 5.0 seconds = 684.355 FPS 3599 frames in 5.0 seconds = 719.718 FPS 3616 frames in 5.0 seconds = 723.072 FPS 3601 frames in 5.0 seconds = 720.198 FPS
Last edited by c0un7d0wn; 29 June 2008, 06:11 PM.Leave a comment:
-
nope... the procinfo was taken when the processor was in low requirements so that it was running at lowest speed. when glxgears starts the processor goes up to max speed (i've verified it with htop). i was able to get out some more speed after removing enablepageflip (sincerely i don't know why i was using it) but it's still slow (400fps). the old x200 with half ram was running more than rs690 (about 600-700 fps).Originally posted by bridgman View Post
as for drm and so on, i've just finished reinstalling today's packages after removing old ones manually. so there aren't old packages on my system. i was also able to run compiz for about 30 seconds but it was so unstable that i had to kill xorg server. the log now has only one failure (it cannot find the type1 extension that was removed from newer servers). well, i think i'll try out looking at the options in xorg.conf since i think that in the end are them that are causing problems.
might be that enabling mtrr would slow down the board?! with the old x200 i had nearly 85fps increase in performance after enabling it so i had enabled it also for the rs690 and haven't removed it anymore.Leave a comment:
-
givemesugar, I haven't waded through all the info in detail but at first glance I'm wondering if you still have an old smelly drm for some reason, maybe new one built but didn't get installed properly ?
Your CPU shows clock of 800 MHz vs 2 GHz for countdown's, but IIRC the TK-57 runs at ~1.9 GHz when at full speed. Could be yours is just running slow all the time; might be interesting to pull clock info while glxgears is running.Leave a comment:
-
glxinfo:
lspci -vvs 01:05.0:Code:name of display: :0.0 R300 DRI driver expected DDX version 4-5.0.x but got version 6.9.0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.2 server glx extensions: GLX_ARB_multisample, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_OML_swap_method, GLX_SGI_make_current_read, GLX_SGIS_multisample, GLX_SGIX_hyperpipe, GLX_SGIX_swap_barrier, GLX_SGIX_fbconfig, GLX_MESA_copy_sub_buffer client glx vendor string: SGI client glx version string: 1.4 client glx extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap GLX version: 1.2 GLX extensions: GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig OpenGL vendor string: Mesa Project OpenGL renderer string: Software Rasterizer OpenGL version string: 2.1 Mesa 7.1 rc1 OpenGL extensions: GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, GL_ARB_half_float_pixel, GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_shadow_ambient, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_clip_volume_hint, GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture, GL_EXT_depth_bounds_test, GL_EXT_draw_range_elements, GL_EXT_framebuffer_object, GL_EXT_framebuffer_blit, GL_EXT_fog_coord, GL_EXT_gpu_program_parameters, GL_EXT_histogram, GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil, GL_EXT_packed_pixels, GL_EXT_paletted_texture, GL_EXT_pixel_buffer_object, GL_EXT_point_parameters, GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color, GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_shared_texture_palette, GL_EXT_stencil_wrap, GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp, GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, GL_EXT_vertex_array, GL_APPLE_packed_pixels, GL_APPLE_vertex_array_object, GL_ATI_blend_equation_separate, GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once, GL_ATI_fragment_shader, GL_ATI_separate_stencil, GL_IBM_multimode_draw_arrays, GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_program_debug, GL_MESA_resize_buffers, GL_MESA_texture_array, GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square, GL_NV_fragment_program, GL_NV_light_max_exponent, GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format, GL_SGI_color_matrix, GL_SGI_color_table, GL_SGI_texture_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, GL_SGIX_shadow, GL_SGIX_shadow_ambient, GL_SUN_multi_draw_arrays visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat ---------------------------------------------------------------------- 0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None 0x5b 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
lspci -vvs 00:01.0:Code:01:05.0 VGA compatible controller: ATI Technologies Inc RS690M [Radeon X1200 Series] (prog-if 00 [VGA controller]) Subsystem: Device 1631:c108 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fd8f0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at 8800 [size=256] Region 5: Memory at fd700000 (32-bit, non-prefetchable) [size=1M] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000
Code:00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 I/O behind bridge: 00008000-00008fff Memory behind bridge: fd600000-fd8fffff Prefetchable memory behind bridge: 00000000bbf00000-00000000dbefffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [44] HyperTransport: MSI Mapping Enable+ Fixed+ Capabilities: [b0] Subsystem: Device 1631:c108Leave a comment:
-
here are some infos. i've added not only cpuinfo and meminfo, but also the xorg.conf, xorg.0.log after the last update, xvinfo, glxinfo, glxgears, lspci -vv on the video device and the gfx pci to pci bridge.
/proc/cpuinfo:
meminfo:Code:processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 104 model name : AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping : 2 cpu MHz : 800.000 cache size : 256 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch bogomips : 1644.05 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 104 model name : AMD Athlon(tm) 64 X2 Dual-Core Processor TK-57 stepping : 2 cpu MHz : 800.000 cache size : 256 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy 3dnowprefetch bogomips : 1644.05 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc 100mhzsteps
model:Code:MemTotal: 3779316 kB MemFree: 901056 kB Buffers: 276804 kB Cached: 1803084 kB SwapCached: 192 kB Active: 797600 kB Inactive: 1641928 kB SwapTotal: 8008360 kB SwapFree: 7985112 kB Dirty: 12112 kB Writeback: 0 kB AnonPages: 359608 kB Mapped: 105924 kB Slab: 385536 kB SReclaimable: 350780 kB SUnreclaim: 34756 kB PageTables: 13932 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 9898016 kB Committed_AS: 722720 kB VmallocTotal: 34359738367 kB VmallocUsed: 23888 kB VmallocChunk: 34359714451 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB
http://support.packardbell.com/it/it...4e06606&g=1400
xvinfo:
xorg.conf:Code:X-Video Extension version 2.2 screen #0 Adaptor #0: "Radeon Textured Video" number of ports: 16 port base: 57 operations supported: PutImage supported visuals: depth 24, visualID 0x21 no port attributes defined maximum XvImage size: 2048 x 2048 Number of image formats: 4 id: 0x32595559 (YUY2) guid: 59555932-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: YUV (packed) id: 0x32315659 (YV12) guid: 59563132-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) id: 0x30323449 (I420) guid: 49343230-0000-0010-8000-00aa00389b71 bits per pixel: 12 number of planes: 3 type: YUV (planar) id: 0x59565955 (UYVY) guid: 55595659-0000-0010-8000-00aa00389b71 bits per pixel: 16 number of planes: 1 type: YUV (packed)
http://pastebin.com/med95127
xorg.0.log:
http://pastebin.com/m57151b8f
mesa, libdrm, x11-drm, xorg-server, xf86-video-ati updated yesterday (now i get an error with aiglx that before wasn't present)
glxgears:
Code:R300 DRI driver expected DDX version 4-5.0.x but got version 6.9.0 406 frames in 5.0 seconds = 81.076 FPS 440 frames in 5.0 seconds = 87.866 FPS 328 frames in 5.3 seconds = 61.973 FPS 894 frames in 5.0 seconds = 178.617 FPS 1031 frames in 5.0 seconds = 206.076 FPS 997 frames in 5.0 seconds = 199.302 FPS 1026 frames in 5.0 seconds = 205.171 FPS 1020 frames in 5.0 seconds = 203.872 FPS 1041 frames in 5.0 seconds = 208.191 FPS 1029 frames in 5.0 seconds = 205.659 FPS 1044 frames in 5.0 seconds = 208.753 FPS XIO: fatal IO error 11 (Resource temporarily unavailable) on X server ":0.0" after 19754 requests (19340 known processed) with 0 events remaining.Leave a comment:
-
Here is cpuinfo:
meminfo:Code:$ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping : 2 cpu MHz : 2000.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 4125.35 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 72 model name : AMD Turion(tm) 64 X2 Mobile Technology TL-60 stepping : 2 cpu MHz : 2000.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 4125.35 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc
The laptop is this: http://www.msicomputer.com/NB/produc...?model=MS-1222Code:$ cat /proc/meminfo MemTotal: 1933796 kB MemFree: 337280 kB Buffers: 32360 kB Cached: 1302768 kB SwapCached: 1088 kB Active: 368464 kB Inactive: 1128700 kB SwapTotal: 2441872 kB SwapFree: 2398840 kB Dirty: 4104 kB Writeback: 0 kB AnonPages: 160984 kB Mapped: 49144 kB Slab: 49020 kB SReclaimable: 33224 kB SUnreclaim: 15796 kB PageTables: 10732 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 3408768 kB Committed_AS: 495536 kB VmallocTotal: 34359738367 kB VmallocUsed: 22680 kB VmallocChunk: 34359715639 kB
It is a barebone i used to put together from a dead laptop.Last edited by c0un7d0wn; 29 June 2008, 12:54 PM.Leave a comment:
-
Countdown/Givemesugar, can you give a bit of CPU info ? The X12xx does vertex processing on the CPU and glxgears does hardly any pixel processing so you may be CPU limited, not sure.
It would be useful to compare performance on something which made the GPU work a bit harder.Leave a comment:
-
well, after some hard time at work, i've come back to try out setting the pc to a good health. the problem is that i still cannot get a good performance from my x1200 igp. i'm on the latest xorg, mesa, dri git code but still i have a very bad performance.... 215-216 fps in glxgears. to me it seems a little slow for a board like this. any hints on what i could try except for what i can find here?!Originally posted by c0un7d0wn View PostLeave a comment:
Leave a comment: