Announcement

Collapse
No announcement yet.

Legacy ATI fglrx Drivers on Fedora Core 6 Zod (DISCUSSION)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #11
    Some progress to report. I can get the X server to start now with:

    Option "ForceMonitors" "notv"

    I saw some Ubuntu bugs about a similar problem and figured I'd try their solution.

    This of course defeats my purposes so I need to figure out now how to get both crt1 and tv working and mirroring. Using "ForceMonitors" "crt1,tv" and "DesktopSetup" "clone" just gets me back to the "no screens" problem.

    X -configure's crash still happens and may be a separate issue, but I'm not sure it'll directly affect this setup.

    EDIT: "DesktopSetup" "mirror" is what I should have had. X will now start, but no picture on the CRT. So my quest has morphed from a "drat, X won't start" to a "how do I get the blasted TV-Out to work." If anybody has a working xorg.conf to share, much appreciated. Here's a device section that doesn't work:
    Code:
            Driver      "fglrx"
            Option      "VideoOverlay" "on"
            Option      "TVStandard" "VIDEO"
            Option      "TVFormat" "NTSC-M"
            Option      "DesktopSetup" "mirror"
            Option      "EnableMonitor" "tv,crt1"
            Option      "HSync2" "30-50"
            Option      "VRefresh2" "60"
            Option      "ForceMonitors" "crt1,tv"
    Last edited by bill_mcgonigle; 11-21-2006, 01:23 AM.

    Comment


    • #12
      I think I spoke too soon. Based on some further experimentation I can crash fglrx just on startup. Using the configuration generated by:

      aticonfig --initial=dual-head --input=/etc/X11/xorg.conf --tvf=NTSC --tvs=VIDEO --hsync2=30-50 --vrefresh2=60 --ovon=1 -v

      I get the xorg.conf as follows:

      Code:
      Section "ServerLayout"
              Identifier     "single head configuration"
              Screen      0  "aticonfig-Screen[0]" 0 0
              Screen         "aticonfig-Screen[1]" RightOf "aticonfig-Screen[0]"
              InputDevice    "Keyboard0" "CoreKeyboard"
      EndSection
      
      Section "Files"
      EndSection
      
      Section "Module"
              Load  "dri"
              Load  "glx"
      EndSection
      
      Section "Extensions"
              Option "Composite" "Disable"
      EndSection
      
      Section "InputDevice"
              Identifier  "Keyboard0"
              Driver      "kbd"
              Option      "XkbModel" "pc105"
              Option      "XkbLayout" "us"
      EndSection
      
      Section "Monitor"
              Identifier   "aticonfig-Monitor[0]"
              Option      "VendorName" "ATI Proprietary Driver"
              Option      "ModelName" "Generic Autodetecting Monitor"
              Option      "DPMS" "true"
      EndSection
      
      Section "Monitor"
              Identifier   "aticonfig-Monitor[1]"
              Option      "VendorName" "ATI Proprietary Driver"
              Option      "ModelName" "Generic Autodetecting Monitor"
              Option      "DPMS" "true"
      EndSection
      
      Section "Device"
              Identifier  "aticonfig-Device[0]"
              Driver      "fglrx"
              Option      "TVFormat" "NTSC-M"
              Option      "TVStandard" "VIDEO"
              Option      "HSync2" "30-50"
              Option      "VRefresh2" "60"
              Option      "OverlayOnCRTC2" "1"
              BusID       "PCI:1:5:0"
      EndSection
      
      Section "Device"
              Identifier  "aticonfig-Device[1]"
              Driver      "fglrx"
              BusID       "PCI:1:5:0"
              Screen      1
      EndSection
      
      Section "Screen"
              Identifier "aticonfig-Screen[0]"
              Device     "aticonfig-Device[0]"
              Monitor    "aticonfig-Monitor[0]"
              DefaultDepth     24
              SubSection "Display"
                      Viewport   0 0
                      Depth     24
                      Modes "[email protected]"
              EndSubSection
      EndSection
      
      Section "Screen"
              Identifier "aticonfig-Screen[1]"
              Device     "aticonfig-Device[1]"
              Monitor    "aticonfig-Monitor[1]"
              DefaultDepth     24
              SubSection "Display"
                      Viewport   0 0
                      Depth     24
                      Modes "[email protected]"
              EndSubSection
      EndSection
      and then the driver crashes:

      Code:
      (EE) fglrx(0): PreInitDAL failed
      (EE) fglrx(0): R200PreInit failed
      
      Backtrace:
      0: X(xf86SigHandler+0x81) [0x80e53b1]
      1: [0xc27420]
      2: /usr/lib/xorg/modules/drivers/fglrx_drv.so(R200PreInit+0x526) [0x259f26]
      3: X(InitOutput+0x9c1) [0x80a1cb1]
      4: X(main+0x276) [0x806f856]
      5: /lib/libc.so.6(__libc_start_main+0xdc) [0x78cf2c]
      6: X(FontFileCompleteXLFD+0x1e9) [0x806eda1]

      Comment


      • #13
        Hi all,
        great script! I have been trying to get my 8200LE card going for ages!

        I have one small snag. Heres the output of the script where it fails. This one has got me to a dead end..

        I've had to chop most of the output out as it's quite long and wont fit in a post, but here goes.

        Code:
        ATI module generator V 2.0
        ==========================
        initializing...
        make.sh: line 451: [: =: unary operator expected
        make.sh: line 525: [: =: unary operator expected
        OsRelease=2.6.18-1.2849.fc6
        major=2
        minor=6
        patch=18
        extra=-1.2849.fc6
        SMP=
        smp=
        iii=
        AGP=1
        CC=gcc
        cc_version=
        cleaning...
        patching 'highmem.h'...
        assuming new VMA API since we do have kernel 2.6.x...
         Assuming default VMAP API
        doing Makefile based build for kernel 2.6.x and higher
        make -C /lib/modules/2.6.18-1.2849.fc6/build SUBDIRS=/tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x modules
        make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2849.fc6-i586'
          CC [M]  /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
        /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:49:2: error: #error unknown or undefined architecture configured
        In file included from include/asm/thread_info.h:16,
                         from include/linux/thread_info.h:21,
                         from include/linux/preempt.h:9,
                         from include/linux/spinlock.h:49,
                         from include/linux/capability.h:45,
                         from include/linux/sched.h:44,
                         from include/linux/module.h:9,
                         from /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:90:
        include/asm/processor.h:80: error: 'CONFIG_X86_L1_CACHE_SHIFT' undeclared here (not in a function)
        include/asm/processor.h:80: error: requested alignment is not a constant
        In file included from include/linux/sched.h:49,
                         from include/linux/module.h:9,
                         from /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:90:
        include/linux/jiffies.h:18:5: warning: "CONFIG_HZ" is not defined
        include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined
        I get multiple pages of this:

        include/linux/jiffies.h:20:7: warning: "CONFIG_HZ" is not defined

        Until eventually this is shown:

        Code:
        /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3170: error: 'CONFIG_PAGE_OFFSET' undeclared (first use in this function)
        make[2]: *** [/tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o] Error 1
        make[1]: *** [_module_/tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x] Error 2
        make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2849.fc6-i586'
        make: *** [kmod_build] Error 2
        build failed with return value 2
        error: Bad exit status from /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/rpm-tmp.97873 (%install)
        
        
        RPM build errors:
            Bad exit status from /tmp/ATI-fglrx-8.28.8-1-5280-root/tmp/rpm-tmp.97873 (%install)
        _______________________________________________________________
        ATI fglrx 8.28.8 Legacy drivers for Fedora Core 6 Zod
        Run this only if you are using an R200 (e.g. Radeon 9200) graphics card.
        New drivers are available for post-R200 hardware.
        Created by Michael Larabel of Phoronix
        Install resulting RPMs using rpm -ivh
        Usage See: http://www.phoronix.net/forums/forumdisplay.php?f=19
        Hit any key to continue
        Any advice much appreciated

        Comment


        • #14
          Did you compile the kernel yourself, or what version are you using (uname -a)?

          It's having a problem with the kernel.
          Michael Larabel
          http://www.michaellarabel.com/

          Comment


          • #15
            Thanks for the quick reply Michael. The kernel is just an everyday vanilla rpm package Here's the output of uname -a:

            [[email protected] Desktop]# uname -a
            Linux blackbraes 2.6.18-1.2849.fc6 #1 SMP Fri Nov 10 12:36:14 EST 2006 i686 athlon i386 GNU/Linux

            Here's some additional info on kernel packages:

            [[email protected] Desktop]# rpm -qa | grep kernel
            kernel-devel-2.6.18-1.2849.fc6
            kernel-headers-2.6.18-1.2798.fc6
            kernel-devel-2.6.18-1.2798.fc6.stk16
            kernel-2.6.18-1.2849.fc6
            kernel-2.6.18-1.2798.fc6.stk16
            kernel-headers-2.6.18-1.2849.fc6


            I could always reboot into the older kernel and see if it compiles in there...
            Last edited by jordandalley; 12-08-2006, 09:33 PM.

            Comment


            • #16
              Yes, see if it compiles in the older kernel. Last time I worked on that script it had built fine (original FC6 kernel). I can also update the script if needed if it turns out to be a issue introduced in the new kernel.
              Michael Larabel
              http://www.michaellarabel.com/

              Comment


              • #17
                I rebooted into the older kernel. The results, though not conclusive look slightly better than last time. Here's the output this time:

                Code:
                ==================================================
                 ATI Technologies Linux Driver Installer/Packager 
                ==================================================
                Generating package: Fedora/FC6
                install: cannot stat `fireglcontrolpanel': No such file or directory
                Package build failed!
                Package build utility output:
                Building target platforms: i386
                Building for target i386
                Executing(%prep): /bin/sh -e /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/rpm-tmp.8331
                + umask 022
                + cd /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD
                + cd /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD
                + cd ATI-fglrx-8.28.8
                ++ /usr/bin/id -u
                + '[' 0 = 0 ']'
                + /bin/chown -Rhf root .
                ++ /usr/bin/id -u
                + '[' 0 = 0 ']'
                + /bin/chgrp -Rhf root .
                + /bin/chmod -Rf a+rX,u+w,g-w,o-w .
                + exit 0
                Executing(%build): /bin/sh -e /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/rpm-tmp.8331
                + umask 022
                + cd /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD
                + cd ATI-fglrx-8.28.8
                + exit 0
                Executing(%install): /bin/sh -e /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/rpm-tmp.8331
                + umask 022
                + cd /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD
                + cd ATI-fglrx-8.28.8
                + rm -rf /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root
                + '[' -d /etc/ld.so.conf.d ']'
                + mkdir -p /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/etc/ld.so.conf.d
                + pushd /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/etc/ld.so.conf.d
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/etc/ld.so.conf.d /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + cat
                + popd
                /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + mkdir -p /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/share/applications
                + pushd /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/share/applications
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/share/applications /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + cat
                + popd
                /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + cp -pR /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8/etc /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8/lib /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8/usr /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root
                + find /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/share/doc -type f -perm 0555 -exec chmod 0644 '{}' ';'
                + find /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root -type f -perm 0555 -exec chmod 0755 '{}' ';'
                + export AS_USER=y
                + AS_USER=y
                + pushd /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + bash make.sh verbose
                ATI module generator V 2.0
                ==========================
                initializing...
                cat: /lib/modules/2.6.18-1.2798.fc6.stk16/build/include/linux/version-*.h: No such file or directory
                OsRelease=2.6.18-1.2798.fc6.stk16
                major=2
                minor=6
                patch=18
                extra=-1.2798.fc6.stk16
                SMP=1
                smp=-SMP
                iii=
                AGP=1
                CC=gcc
                cc_version=
                cleaning...
                patching 'highmem.h'...
                assuming new VMA API since we do have kernel 2.6.x...
                 Assuming default VMAP API
                doing Makefile based build for kernel 2.6.x and higher
                make -C /lib/modules/2.6.18-1.2798.fc6.stk16/build SUBDIRS=/tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x modules
                make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6.stk16-i586'
                  CC [M]  /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.o
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:459: warning: initialization from incompatible pointer type
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function 'firegl_stub_open':
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:582: warning: assignment discards qualifiers from pointer target type
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c: In function '__ke_smp_call_function':
                /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/firegl_public.c:3896: warning: passing argument 1 of 'smp_call_function' from incompatible pointer type
                  LD [M]  /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.o
                  Building modules, stage 2.
                  MODPOST
                WARNING: could not find /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/.libfglrx_ip.a.GCC4.cmd for /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/libfglrx_ip.a.GCC4
                  CC      /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.mod.o
                  LD [M]  /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx/build_mod/2.6.x/fglrx.ko
                make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6.stk16-i586'
                build succeeded with return value 0
                duplicating results into driver repository...
                done.
                ==============================
                You must change your working directory to /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx
                and then call ./make_install.sh in order to install the built module.
                ==============================
                + mkdir -p /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6.stk16/extra
                + install -D -m 0644 fglrx.ko /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/2.6.18-1.2798.fc6.stk16/extra/fglrx/fglrx.ko
                + rm -rf /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/lib/modules/fglrx
                + popd
                /tmp/ATI-fglrx-8.28.8-1-5360-root/BUILD/ATI-fglrx-8.28.8
                + /usr/lib/rpm/brp-compress
                + /usr/lib/rpm/brp-strip
                + /usr/lib/rpm/brp-strip-static-archive
                + /usr/lib/rpm/brp-strip-comment-note
                Processing files: ATI-fglrx-8.28.8-1.fc6
                Provides: atiogl_a_dri.so config(ATI-fglrx) = 8.28.8-1.fc6 fglrx_dri.so fglrx_drv.so libGL.so.1 libfglrx_dm.so.1.0 libfglrx_gamma.so.1 libfglrx_pp.so.1.0 libfglrx_tvout.so.1 libfglrxdrm.so
                Requires(interp): /bin/sh /bin/sh /bin/sh
                Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
                Requires(post): /bin/sh /sbin/chkconfig /sbin/ldconfig
                Requires(preun): /bin/sh /sbin/chkconfig /sbin/service
                Requires(postun): /bin/sh /sbin/ldconfig /sbin/service
                Requires: /bin/bash /bin/sh config(ATI-fglrx) = 8.28.8-1.fc6 kernel-module-ATI-fglrx-2.6.18-1.2798.fc6.stk16 = 8.28.8-1.fc6 libGL.so.1 libX11.so.6 libXext.so.6 libXrandr.so.2 libXrender.so.1 libc.so.6 libc.so.6(GLIBC_2.0) libc.so.6(GLIBC_2.1) libc.so.6(GLIBC_2.1.3) libc.so.6(GLIBC_2.2.3) libdl.so.2 libdl.so.2(GLIBC_2.0) libdl.so.2(GLIBC_2.1) libfglrx_dm.so.1.0 libfglrx_gamma.so.1 libfglrx_pp.so.1.0 libfglrx_tvout.so.1 libgcc_s.so.1 libgcc_s.so.1(GCC_3.0) libgcc_s.so.1(GLIBC_2.0) libm.so.6 libm.so.6(GLIBC_2.0) libm.so.6(GLIBC_2.1) libpthread.so.0 libpthread.so.0(GLIBC_2.0) librt.so.1 librt.so.1(GLIBC_2.2) libstdc++.so.5 libstdc++.so.5(CXXABI_1.2) libstdc++.so.5(GLIBCPP_3.2) system-config-display
                Conflicts: fglrx fglrx-glc22 fglrx_4_3_0 fglrx_6_8_0 kernel-module-fglrx ati-fglrx ati-fglrx-devel kmod-fglrx xorg-x11-drv-fglrx xorg-x11-drv-fglrx-devel nvidia-glx nvidia-glx-legacy xorg-x11-drv-nvidia xorg-x11-drv-nvidia-legacy
                Processing files: ATI-fglrx-control-panel-8.28.8-1.fc6
                error: File not found: /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/bin/fireglcontrolpanel
                Processing files: ATI-fglrx-devel-8.28.8-1.fc6
                Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
                Requires: /usr/include/GL ATI-fglrx = 8.28.8-1.fc6 libGL.so.1
                Processing files: kernel-module-ATI-fglrx-2.6.18-1.2798.fc6.stk16-8.28.8-1.fc6
                Requires(interp): /bin/sh /bin/sh
                Requires(rpmlib): rpmlib(CompressedFileNames) <= 3.0.4-1 rpmlib(PayloadFilesHavePrefix) <= 4.0-1
                Requires(post): /bin/sh
                Requires(postun): /bin/sh
                
                
                RPM build errors:
                    File not found: /tmp/ATI-fglrx-8.28.8-1-5360-root/tmp/ATI-fglrx-8.28.8-1.fc6-root-root/usr/bin/fireglcontrolpanel
                _______________________________________________________________
                ATI fglrx 8.28.8 Legacy drivers for Fedora Core 6 Zod
                Run this only if you are using an R200 (e.g. Radeon 9200) graphics card.
                New drivers are available for post-R200 hardware.
                Created by Michael Larabel of Phoronix
                Install resulting RPMs using rpm -ivh
                Usage See: http://www.phoronix.net/forums/forumdisplay.php?f=19
                Hit any key to continue
                _______________________________________________________________

                Comment


                • #18
                  This time it's due to the fireglcontrolpanel. See: http://phoronix.net/forums/showthread.php?t=318
                  Michael Larabel
                  http://www.michaellarabel.com/

                  Comment


                  • #19
                    Thanks Michael,

                    I thought I had seen that error before somewhere on this forum.

                    If I compile to rpms in the older kernel, will they still work in the new one - or will I need to somehow get it to compile in the new one.

                    Comment


                    • #20
                      Now getting:

                      Code:
                      [[email protected] ATI]# make
                      make: g++: Command not found
                      make: g++: Command not found
                      make: g++: Command not found
                      gcc -c -g -O2 -fno-strength-reduce -funsigned-char -Dlinux -DFGLRX_USE_XEXTENSIONS -DFGLRX_OGL_INFO -DQT_NO_STL -I/usr/X11R6/include -I. -I./include_dummy FGLRXExtensions.c
                      gcc -c -g -O2 -fno-strength-reduce -funsigned-char -Dlinux -DFGLRX_USE_XEXTENSIONS -DFGLRX_OGL_INFO -DQT_NO_STL -I/usr/X11R6/include -I. -I./include_dummy ATITVOExtensions.c
                      g++ -c  -O2 -fno-strength-reduce -funsigned-char -Wall -W -Dlinux -DFGLRX_USE_XEXTENSIONS -DFGLRX_OGL_INFO -DQT_NO_STL -I/usr/lib/qt-3.3/include -I. -I./include_dummy main.cpp
                      make: g++: Command not found
                      make: *** [main.o] Error 127
                      [[email protected] ATI]#
                      Funny thing is, I actually have all the qt stuff installed. What package handles g++?

                      Comment

                      Working...
                      X