radeon-profile: tool for changing profiles and monitoring some GPU parameters

[marazmista]

Hi everyone!

I made gui application for changing profiles and monitoring temperature, clocks and voltage (if available). Works with old profiles and DPM.
I also tried implement functionality like radeontop but with no luck so far.
Qt4 is required and lm-sensors for temperature.

Main window
Graphs

Bug reports, comments and other thoughts are welcome

https://github.com/marazmista/radeon-profile
Arch Linux AUR

[brosis]

I bump this for what deserves to be bumped!

[Bushido_root]

Was curious and wanted to try it myself, but with failed installation attempts :V

[email protected]:~$ cd '/home/x/Repositories/radeon-profile-master/radeon-profile' 
[email protected]:~/Repositories/radeon-profile-master/radeon-profile$ qmake-qt4 && make
/usr/bin/uic-qt4 radeon_profile.ui -o ui_radeon_profile.h
make: /usr/bin/uic-qt4: Command not found
make: *** [ui_radeon_profile.h] Error 127
[email protected]:~/Repositories/radeon-profile-master/radeon-profile$ `qmake-qt4 && make`
make: /usr/bin/uic-qt4: Command not found
make: *** [ui_radeon_profile.h] Error 127
bash: /usr/bin/uic-qt4: No such file or directory
[email protected]:~/Repositories/radeon-profile-master/radeon-profile$ qmake-qt4
[email protected]:~/Repositories/radeon-profile-master/radeon-profile$ make
/usr/bin/uic-qt4 radeon_profile.ui -o ui_radeon_profile.h
make: /usr/bin/uic-qt4: Command not found
make: *** [ui_radeon_profile.h] Error 127
[email protected]:~/Repositories/radeon-profile-master/radeon-profile$

I have qmake-qt4 installed.

What am I doing wrong?

EDIT: Oh nvm, was missing some deps for qt4 >_>
EDIT: Pretty handy tool~ Oh and if 'profiles' tab is greyed out, that mean that there are no profiles for me to set?

[marazmista]

'Profiles' tab is enabled when kernel version is below 3.11 (no dpm support and then dpm tab is disabled). In 3.11 DPM was introduced and old profiles(default, auto, low, mid, high) were replaced by DPM profiles (battery, balanced, preformance).

[Bushido_root]

'Profiles' tab is enabled when kernel version is below 3.11 (no dpm support and then dpm tab is disabled). In 3.11 DPM was introduced and old profiles(default, auto, low, mid, high) were replaced by DPM profiles (battery, balanced, preformance).

Ah I see, thanks for clearing that up.
Seeing how there's no 'make install' I just ran ./radeon-profile (as sudo) after qmake-qt4 && make which launched the program just fine.
Am I suppose to move the newly made radeon-profile bin to /usr/bin ?

EDIT: Oh, would it be possible for you to make a feature where one could minimize the window to systray? That would be neat seeing how you already made a system tray feature already.

[marazmista]

Am I suppose to move the newly made radeon-profile bin to /usr/bin ?

Yes, it will work normally. It is one-file application.

EDIT: Oh, would it be possible for you to make a feature where one could minimize the window to systray? That would be neat seeing how you already made a system tray feature already.

You can hide app to tray by clicking the tray icon(and restore by clicking again). As you suggested, I modified it today and now app go to tray when minimized.

[Bushido_root]

Yes, it will work normally. It is one-file application.



You can hide app to tray by clicking the tray icon(and restore by clicking again). As you suggested, I modified it today and now app go to tray when minimized.

Thank you.

[AnonymousCoward]

I tried it on my RS880/HD4290 with kernel 3.11 and DPM enabled, and without root access it works, but doesn't show clock etc.. Run as root it crashes, it seems the RS880 doesn't report voltages, /sys/kernel/debug/dri/0/radeon_pm_info looks like this:

uvd    vclk: 0 dclk: 0
power level 0    sclk: 50000 vddc_index: 1

[marazmista]

Thanks for reporting this! I pushed fix to git repo, so now it should read values correctly.

[AnonymousCoward]

Thanks, that did it.