AMD 8.42.3 Driver Released -- The Baby Is Born!

[Neo4]

can you post your /etc/X11/xorg.conf, what distro are you running, the kernel and if you run /etc/init.d/atieventsd at boot. maybe i can find out if it's a misconfiguration problem.
ps. do you get this thing with the normal kwin/gnome decorator?



how do you log in x?! startx or /etc/init.d/xdm? do you per chance have compiled and loaded the drm kernel module (lsmod | grep drm). that should not be the case and should not load with fglrx but you never know...
ps. does it prevent you from working again normally after that error?

my xorg.conf:

# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
#Section "Extensions"
#       Option          "Composite"     "0"
#EndSection

Section "ServerLayout"
	
	# Uncomment if you have a wacom tablet
	#	InputDevice     "stylus"	"SendCoreEvents"
	#	InputDevice     "cursor"	"SendCoreEvents"
	#	InputDevice     "eraser"	"SendCoreEvents"
	Identifier	"Default Layout"
  screen 0 "aticonfig-Screen[0]" 0 0
	Inputdevice	"Generic Keyboard"
	Inputdevice	"Configured Mouse"
	Inputdevice	"Synaptics Touchpad"
EndSection

Section "Files"
EndSection

Section "Module"
	Load		"glx"
	Load		"GLcore"
	Load		"dri"
	Load		"v4l"
EndSection

Section "InputDevice"
	Identifier	"Generic Keyboard"
	Driver		"kbd"
	Option		"CoreKeyboard"
	Option		"XkbRules"	"xorg"
	Option		"XkbModel"	"pc105"
	Option		"XkbLayout"	"us"
EndSection

Section "InputDevice"
	Identifier	"Configured Mouse"
	Driver		"mouse"
	Option		"CorePointer"
	Option		"Device"	"/dev/input/mice"
	Option		"Protocol"	"ImPS/2"
	Option		"ZAxisMapping"	"4 5"
	Option		"Emulate3Buttons"	"true"
EndSection

Section "InputDevice"
	Identifier	"Synaptics Touchpad"
	Driver		"synaptics"
	Option		"SendCoreEvents"	"true"
	Option		"Device"	"/dev/psaux"
	Option		"Protocol"	"auto-dev"
	Option		"HorizScrollDelta"	"0"
EndSection

Section "InputDevice"
	Identifier	"stylus"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"stylus"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier	"eraser"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"eraser"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
	Identifier	"cursor"
	Driver		"wacom"
	Option		"Device"	"/dev/input/wacom"
	Option		"Type"	"cursor"
	Option		"ForceDevice"	"ISDV4"# Tablet PC ONLY
EndSection

Section "Monitor"
	Identifier	"Monitor Gen?rico"
	Modelname	"Custom 1"
	Gamma	1
  modeline  "640x480@60" 25.2 640 656 752 800 480 490 492 525 -hsync -vsync
  modeline  "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
  modeline  "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
  modeline  "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
  modeline  "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
  modeline  "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
EndSection

Section "Monitor"
	
	# 
	Identifier	"monitor1"
	Gamma	1
EndSection

Section "Monitor"
	Identifier	"aticonfig-Monitor[0]"
	Option		"VendorName"	"ATI Proprietary Driver"
	Option		"ModelName"	"Generic Autodetecting Monitor"
	Option		"DPMS"	"true"
EndSection

Section "Device"
	Identifier	"ATI Technologies Inc Radeon Mobility X700 (PCIE)"
	Driver		"fglrx"
	Vendorname	"ATI"
	Boardname	"ATI Radeon"
	Option		"MergedFB"	"off"
	Option		"VideoOverlay"	"on"
	Option		"OpenGLOverlay"	"off"
	Busid		"PCI:1:0:0"
	Option 		"HWCursor" 	"On"
EndSection

Section "Device"
	
	# 
	Identifier	"device1"
	Driver		"fglrx"
	Vendorname	"ATI"
	Boardname	"ATI Radeon"
	Option		"MergedFB"	"off"
	Busid		"PCI:1:0:0"
	Screen	1
EndSection

Section "Device"
	Identifier	"aticonfig-Device[0]"
	Driver		"fglrx"
	Option		"VideoOverlay"	"on"
	Option		"OpenGLOverlay"	"off"
	Option 		"HWCursor" 	"On"
EndSection

Section "Screen"
	Identifier	"Default Screen"
	Device		"ATI Technologies Inc Radeon Mobility X700 (PCIE)"
	Monitor		"Monitor Gen?rico"
	Defaultdepth	24
	SubSection "Display"
		Virtual	1280	1024
		Depth	24
		Modes		"1280x960@60"	"1280x1024@60"	"1024x768@60"	"800x600@60"	"800x600@56"	"640x480@60"
	EndSubSection
EndSection

Section "Screen"
	
	# 
	Identifier	"screen1"
	Device		"device1"
	Monitor		"monitor1"
	Defaultdepth	24
EndSection

Section "Screen"
	Identifier	"aticonfig-Screen[0]"
	Device		"aticonfig-Device[0]"
	Monitor		"aticonfig-Monitor[0]"
	Defaultdepth	24
	SubSection "Display"
		Viewport	0	0
		Depth	24
	EndSubSection
EndSection

Section "ServerFlags"
        Option "AIGLX" "on"
EndSection

Section "Extensions"
	Option		"Composite"	"1"
EndSection

using ubuntu 7.10
the kernel version is 2.6.22-14-generic
i get this with normal kwin/gnome decorator
i can't enable compiz because its too slow!
how do i run /etc/init.d/atieventsd at boot?!

[Berniyh]

my xorg.conf:
using ubuntu 7.10
the kernel version is 2.6.22-14-generic
i get this with normal kwin/gnome decorator
i can't enable compiz because its too slow!
how do i run /etc/init.d/atieventsd at boot?!

Under Ubuntu I think you can use the program rcconf
(or rconf, I don't exactly know how it is called).
With that, you can add programs (init scripts) to a
specific runlevel.

[Kano]

rcconf can only handle initscripts with default runlevels, the same you get when you use

update-rc.d service defaults

to disable you can use - even with non standard services

update-rc.d -f service remove

[Berniyh]

rcconf can only handle initscripts with default runlevels, the same you get when you use

update-rc.d service defaults

to disable you can use - even with non standard services

update-rc.d -f service remove

That is what I meant.
(Normal programs you can run via local init service.)

Under Gentoo you can create your own runlevels (it has
a more sophisticated system). Does Ubuntu have sth.
similar or does it still only use the standard 0-6 system?

[givemesugarr]

Neo4, have you realized that you have 3 ati devices in your xorg.conf?
it's not really normal...
now, MAKE A BACKUP OF YOUR ACTUAL xorg.conf to xorg.conf.old for example and use the following new xorg.conf.

be aware of some thing:

1. the modes indicated in the modes are for an xga monitor; if you have a wxga 15,4'' (and you're sure about that - all 15,4'' laptop monitors are 1280x800 but you should verify on the producer site) monitor use the commented modes in the section screen instead of the ones you use now by commenting the ones you have now uncommented and uncomment the ones commeted (ie:
this:

Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"

would become:

#Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"

while this

#Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"

would become this:

Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"

2. the font paths setting in the section files:
try to look inside the dirs there indicated and see if you have these fonts, and if they point to the wrong place place them right.

3. some modules in the module section may fail to load. see that section comment to see how to know about that.

4. this configration disables xinerama, cloning on the second external monitor and sets an offtime for the monitor of 5minutes. see the server layout section for this. to modify these settings just comment them out or set them as you preffer.

5. to start atieventsd look into the /etc/init.d/ and see if you have it there, then try it out from a konsole with root priviledges with

/etc/init.d/atieventsd start

and if you get it started, then go the configuration center, search for the daemons configuration (i don't know how this is called, but you should see a list of services as acpid, cups, xdm, alsa and similar listed on the base of different levels 3 - terminal login without xorg, 5 - graphical login, 0 - shutdown, 6 - restart). you'll know when you'd have found it because you'll see these services listed there and you'd be asked for a root password to access it in administrator mode.

6. before using the new xorg.conf logout your user, make a login to the console with "alt+ctrl+f1" and then go back to xlogin with "alt+ctrl+f7". then restart xorg with "ctrl+alt+backspace". if this will turn on your login screen (it should do it since you haven't modified nothing particular) enter your user, get a console and type: cat /var/log/Xorg.0.log | grep EE. if you if you see this followed by something like this:

(EE) error: ....

then there is some error. so that you would do:

cat /var/log/Xorg.0.log >> /home/[your_user]/Desktop [or whatever directory inside /home]/xorg.error.log

and post it here so we can try to help you. if you cannot see errors, then you config is ok, and you may only be needing some tuning, so that you'd save this new xorg.conf to some safe place, and would not modify it again with ati-config or other utils. when your config is ok, then you'd be modifying it ONLY BY HAND to avoid misconfigurations from graphical tools.

7. it would be nice if you can communicate us also if this worked well and not only if you've had problems.

8. the xorg.conf comes in the next post.

[givemesugarr]

xorg.conf for Neo4:

new xorg.conf:

Section "Files"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/corefonts"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/default/ghostscript"
FontPath "/usr/share/fonts/dejavu:unscaled"
FontPath "/usr/share/fonts/efont-unicode:unscaled"
FontPath "/usr/share/fonts/encodings"
FontPath "/usr/share/fonts/encodings/large"
FontPath "/usr/share/fonts/freefonts:unscaled"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/sharefonts"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/ttf"
FontPath "/usr/share/fonts/ttf-bitstream-vera"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/unifont"
FontPath "/usr/share/fonts/util"
FontPath "/opt/Acrobat7/Resource/Font"

FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/local"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/URW"
FontPath "/usr/share/fonts/Speedo"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/latin2/misc:unscaled"
FontPath "/usr/share/fonts/latin2/75dpi:unscaled"
FontPath "/usr/share/fonts/latin2/100dpi:unscaled"
FontPath "/usr/share/fonts/latin2/Type1"
FontPath "/usr/share/fonts/latin7/75dpi:unscaled"
FontPath "/usr/share/fonts/baekmuk:unscaled"
FontPath "/usr/share/fonts/japanese:unscaled"
FontPath "/usr/share/fonts/kwintv"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/uni:unscaled"
FontPath "/usr/share/fonts/CID"
FontPath "/usr/share/fonts/ucs/misc:unscaled"
FontPath "/usr/share/fonts/ucs/75dpi:unscaled"
FontPath "/usr/share/fonts/ucs/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/misc:unscaled"
FontPath "/usr/share/fonts/hellas/75dpi:unscaled"
FontPath "/usr/share/fonts/hellas/100dpi:unscaled"
FontPath "/usr/share/fonts/hellas/Type1"
FontPath "/usr/share/fonts/misc/sgi:unscaled"
FontPath "/usr/share/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
FontPath "unix/:7100"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "Protocol" "Standard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection

Section "InputDevice"
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4 "# Tablet PC ONLY
EndSection

Section "InputDevice"
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4"# Tablet PC ONLY
EndSection

#these should still be on your system -- look at your /var/log/Xorg.0.log to see if there are problems loading some of these modules
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
Load "GLcore"
EndSection

Section "Device"
Identifier "Device[0]"
BoardName "ATI Technologies Inc Radeon Mobility X700 (PCIE)"
Driver "fglrx"
Vendorname "ATI"
Boardname "ATI Radeon"
Option "MergedFB" "off"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Busid "PCI:1:0:0"
Option "HWCursor" "On"
Option "CapabilitiesEx" "0x00000000"
Option "XAANoOffscreenPixmaps" "true"
Option "mtrr" "off"
Option "no_accel" "no"
Option "BlockSignalsOnLock" "on"
Option "KernelModuleParm" "locked-userpages=0"
Option "UseFastTLS" "0"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

Section "Extensions"
Option "DAMAGE" "true"
Option "RENDER" "true"
Option "Composite" "Enable"
EndSection

Section "Monitor"
Identifier "Generic monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "CalcAlgorithm" "XServerPool"
Option "DPMS" "true"
Identifier "Monitor[0]"
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
EndSection

Section "Screen"
DefaultDepth 24
SubSection "Display"
Virtual 1280 1024
Depth 15
Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
# Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Virtual 1280 1024
Depth 16
Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
# Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Virtual 1280 1024
Depth 24
Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
# Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Virtual 1280 1024
Depth 8
Modes "1280x960@60" "1280x1024@60" "1024x768@60" "800x600@60" "800x600@56" "640x480@60"
# Modes "1280x800" "1280x768" "1024x768" "1280x600" "1024x600" "800x600" "768x576" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
Option "IgnoreABI" "on"
Option "AIGLX" "on"
EndSection

Section "ServerLayout"
# Uncomment if you have a wacom tablet
# InputDevice "stylus" "SendCoreEvents"
# InputDevice "cursor" "SendCoreEvents"
# InputDevice "eraser" "SendCoreEvents"
Identifier "Layout[all]"
Inputdevice "Generic Keyboard" "CoreKeyboard"
Inputdevice "Configured Mouse" "CorePointer"
Inputdevice "Synaptics Touchpad" "SendCoreEvents"
# the following options turn off the second display in clone mode, the xinerama and set an offtime before acpi turns off the monitor of 5min
Option "Clone" "off"
Option "Xinerama" "off"
Option "OffTime" "5"
Screen "Screen[0]"
EndSection

[givemesugarr]

sorry to have done a 3 posts reply but the space is limited...

Does Ubuntu have sth.
similar or does it still only use the standard 0-6 system?

the last i've tried it (6.x version) it had the standard 0-6 modes and they would only be configured by graphical tool. that's one of the part that i most hate of ubuntu/kubuntu:
there are only some few configs on the disk (wpa_supplicant/xorg.conf) and finding others had driven me mad. that's something that i cannot accept. i need to be able to manage my configs manually and not only by some graphical tool.
and it's not the only issue:
1. i've tried cmpiling firefox without gtk+ and with qt only (works flawlessly on gentoo) but i wasn't able to get some qt executable
2. i've tried compiling the svn version of knetworkmanager but it needed some libs n /usr/lib when the kubuntu ones were in /usr/local/lib and didn't get it to work even after symlinking since i got an error with the soname and with patches for lbidnl. so i've packaged it with portage and installed and it worked like a charm.
3. i've downloaded, compiled and installed the vanilla kernel, but after reboot i wasn't able to access the system with it. i had to package the rebuilt kernel to a .deb and then install it upgrading the old kernel and the system booted.
after seeing this horrible thing i've formatted the partition and threw out of the windows the kubuntu dvd and i've swear that that piece of sh** would never get on one of my computers.

[Berniyh]

sorry to have done a 3 posts reply but the space is limited...


the last i've tried it (6.x version) it had the standard 0-6 modes and they would only be configured by graphical tool. that's one of the part that i most hate of ubuntu/kubuntu:
there are only some few configs on the disk (wpa_supplicant/xorg.conf) and finding others had driven me mad. that's something that i cannot accept. i need to be able to manage my configs manually and not only by some graphical tool.
and it's not the only issue:
1. i've tried cmpiling firefox without gtk+ and with qt only (works flawlessly on gentoo) but i wasn't able to get some qt executable
2. i've tried compiling the svn version of knetworkmanager but it needed some libs n /usr/lib when the kubuntu ones were in /usr/local/lib and didn't get it to work even after symlinking since i got an error with the soname and with patches for lbidnl. so i've packaged it with portage and installed and it worked like a charm.
3. i've downloaded, compiled and installed the vanilla kernel, but after reboot i wasn't able to access the system with it. i had to package the rebuilt kernel to a .deb and then install it upgrading the old kernel and the system booted.
after seeing this horrible thing i've formatted the partition and threw out of the windows the kubuntu dvd and i've swear that that piece of sh** would never get on one of my computers.

When I tried Debian a few years ago there was a CLI tool to edit the runlevels. I don't know if it was rcconf, but it was there. Since Ubuntu is just a modified Debian system I guess that it was there, too. Maybe you just didn't find it.

[Neo4]

can i just don't use that fonts? they are all wrong! and i guess that i don't have some.
on the /usr/share/fonts/ i have another 3 folders X11 truetype and type 1.

and what's that for? i don't have any problem with my fonts.

thanks for the help!

[givemesugarr]

can i just don't use that fonts? they are all wrong! and i guess that i don't have some.
on the /usr/share/fonts/ i have another 3 folders X11 truetype and type 1.

and what's that for? i don't have any problem with my fonts.

thanks for the help!

the fonts aren't a real problem and xorg will disable them by default if it cannot find them raising a warning. i've had them there for a long time (about when i was using opensuse) and now i don't have all of them inside (only 2 or 3 of them are still there now). for what i know they are there only to make xorg apps know that they're there and can be used. but maybe kde/gnome find them without xorg passing them.