If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Lets be a little bit nicer and explain the units rather than just screaming "WRONG".
Energy is measured in a unit called JOULES (J).
A WATT (W) is the RATE of energy transfer (because energy can be neither created nor destroyed, you can do nothing besides transfer it).
1 W = 1 J/s <--- that is Joule per SECOND, clearly the rate of transfer of energy.
We can play with the time unit a bit to bring it to HOUR....
1 W = 60 J/m
1 W = 3600 J/h <--- now we can see what a watt is in terms of HOURS.
To picture this best, imagine a boat that has been sitting in the rain. It is partly full of water (Joules).
So you can think of JOULES in similar terms as "gallons of water".
Now you have a bucket, you need to empty that water out, so you hop in the boat and start bailing. You scoop up that water and pour it over the side of the boat.
How much time does it take you to bail out all of the water from the boat? That's WATTS. How fast you transfer that water out of the boat.
Moving those units around a little bit to give another familiar unit, we can see something like this;
1 W x 1 h = (3600 J / h) x 1h
1 W.h = 3600 J <--- 1 WATT-HOUR = 3600 JOULES.
When you pay for electricity delivered to your home, it is usually charged per KILOWATT-HOUR. kWh. This is just a convention to make the units look more familiar with respect to things like light bulbs and stove burners, which are described in watts, than it would be if measured in Joules.
1 kWh = 3,600,000 J <--- 1 kWh equals 3.6 million JOULES.
NOW, the inapplicable unit in question... W/h.....
W/h would be J/h/h <--- Joules per hour, per hour. This would be a RATE OF CHANGE OF RATE.
So for example, you have a rain barrel that drives a turbine. The deeper the water is in the rain barrel, the more pressure it outputs, and therefore the more energy you can transfer out of the turbine. Starting with an empty barrel, your transfer rate is 0 W. But it is raining, and filling your barrel at a rate that you measure to increase your energy transfer rate by 2 W/h.
After it has been raining for 1 h, the water is deep enough to transfer 0 W + (1 h x 2 W/h) = 2 W.
After it has been raining for 2 h, the water is deep enough to transfer 0 W + (2 h x 2 W/h) = 4 W, ****OR**** 2 W + (1 h x 2 W/h) = 4 W, depending on whether you are adding one incremental hour, or calculating from the start.
3 h --> 6 W,
4 h --> 8 W,
etc.
If you want to run a 60 watt light bulb off that, you're going to need a pretty tall barrel, and wait 30 hours for it to fill deep enough to generate enough pressure.
Last edited by droidhacker; 18 April 2013, 12:17 PM.
Lets be a little bit nicer and explain the units rather than just screaming "WRONG".
Energy is measured in a unit called JOULES (J).
A WATT (W) is the RATE of energy transfer (because energy can be neither created nor destroyed, you can do nothing besides transfer it).
1 W = 1 J/s <--- that is Joule per SECOND, clearly the rate of transfer of energy.
We can play with the time unit a bit to bring it to HOUR....
1 W = 60 J/m
1 W = 3600 J/h <--- now we can see what a watt is in terms of HOURS.
To picture this best, imagine a boat that has been sitting in the rain. It is partly full of water (Joules).
So you can think of JOULES in similar terms as "gallons of water".
Now you have a bucket, you need to empty that water out, so you hop in the boat and start bailing. You scoop up that water and pour it over the side of the boat.
How much time does it take you to bail out all of the water from the boat? That's WATTS. How fast you transfer that water out of the boat.
Moving those units around a little bit to give another familiar unit, we can see something like this;
1 W x 1 h = (3600 J / h) x 1h
1 W.h = 3600 J <--- 1 WATT-HOUR = 3600 JOULES.
When you pay for electricity delivered to your home, it is usually charged per KILOWATT-HOUR. kWh. This is just a convention to make the units look more familiar with respect to things like light bulbs and stove burners, which are described in watts, than it would be if measured in Joules.
1 kWh = 3,600,000 J <--- 1 kWh equals 3.6 million JOULES.
NOW, the inapplicable unit in question... W/h.....
W/h would be J/h/h <--- Joules per hour, per hour. This would be a RATE OF CHANGE OF RATE.
So for example, you have a rain barrel that drives a turbine. The deeper the water is in the rain barrel, the more pressure it outputs, and therefore the more energy you can transfer out of the turbine. Starting with an empty barrel, your transfer rate is 0 W. But it is raining, and filling your barrel at a rate that you measure to increase your energy transfer rate by 2 W/h.
After it has been raining for 1 h, the water is deep enough to transfer 0 W + (1 h x 2 W/h) = 2 W.
After it has been raining for 2 h, the water is deep enough to transfer 0 W + (2 h x 2 W/h) = 4 W, ****OR**** 2 W + (1 h x 2 W/h) = 4 W, depending on whether you are adding one incremental hour, or calculating from the start.
3 h --> 6 W,
4 h --> 8 W,
etc.
If you want to run a 60 watt light bulb off that, you're going to need a pretty tall barrel, and wait 30 hours for it to fill deep enough to generate enough pressure.
Just for my own edification, um How then would you describe voltage and current. wattage is equal to voltage x current if 1W = 1J/s then how does currrent and voltage work its way in? Is voltage x current just simply a different way of stating J/s?
Just for my own edification, um How then would you describe voltage and current. wattage is equal to voltage x current if 1W = 1J/s then how does currrent and voltage work its way in? Is voltage x current just simply a different way of stating J/s?
Yes.
Joule is a unit of energy. You can move charge over a difference in electric potential (electrical definition with Volts and Coulombs), or you can move weight over a difference of (say) height potential (physical definition with kgs and metres). Both require energy.
I have read that UVD on JUNIPER can only decode 1 HD + 1 SD stream simultaneously (for Blu-Ray PIP). In order to decode 2 HD streams on the 6770 (for Blu-Ray 3D) some sources claim that shaders are used[1] while others say that the UVD clocks are simply increased[2].
AMD marketing materials usally include or reference a quality guarantee. IOW, we don't guarantee quality above 1HD + 1SD (for a particular configuration of hardware, OS, and driver). You can decode more streams but we don't make any quality gurarantees so you may experience dropped frames, jitter, etc. For some applications (security cameras, pure decoding/transcoding to a file), quality is not important so you may not care. Of course, we don't make any guarantees witjh respect to the open source implementation so YMMV but the marketing materials are a useful guide for what you can reasonably expect.
AMD marketing materials usally include or reference a quality guarantee. IOW, we don't guarantee quality above 1HD + 1SD (for a particular configuration of hardware, OS, and driver). You can decode more streams but we don't make any quality gurarantees so you may experience dropped frames, jitter, etc. For some applications (security cameras, pure decoding/transcoding to a file), quality is not important so you may not care. Of course, we don't make any guarantees witjh respect to the open source implementation so YMMV but the marketing materials are a useful guide for what you can reasonably expect.
Tim
Hi Tim. I can think of one example where hi quality encodes will matter. I have a camera pointed down at the cash register drawer. Whenever i get 50s or 100s I flip through them in front of the camera in a way for it to see the serial number. Plus I have lower resolution camera pointed at the counter and another pointed at the entrance. Of course all that encoding is being done in software right now.
Hi Tim. I can think of one example where hi quality encodes will matter. I have a camera pointed down at the cash register drawer. Whenever i get 50s or 100s I flip through them in front of the camera in a way for it to see the serial number. Plus I have lower resolution camera pointed at the counter and another pointed at the entrance. Of course all that encoding is being done in software right now.
He didn't say that NO security applications require high quality, but suggested that SOME DON'T.
Comment