Catalyst 10.8 released...

[Fluggo]

RHEL / CentOS 5.5 Status:
--------------------
Rotation/Pivot still does not work. Will it ever ?

Eyefinity does not work on a HD5770. Third screen is always disabled.

Are these features disabled by ATI on this "supported" distribution ?

[kernelOfTruth]

not working on a ati 5850... thanks ati

works fine here:

01:00.0 VGA compatible controller: ATI Technologies Inc Cypress [Radeon HD 5800 Series] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Device 0b00
Flags: bus master, fast devsel, latency 0, IRQ 55
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fbde0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at c000 [size=256]
Expansion ROM at fbdc0000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: fglrx_pci
Kernel modules: fglrx

01:00.1 Audio device: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series]
Subsystem: ATI Technologies Inc Cypress HDMI Audio [Radeon HD 5800 Series]
Flags: bus master, fast devsel, latency 0, IRQ 53
Memory at fbdbc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: HDA Intel

[madbiologist]

RHEL / CentOS 5.5 Status:
--------------------
Rotation/Pivot still does not work. Will it ever ?

Eyefinity does not work on a HD5770. Third screen is always disabled.

Are these features disabled by ATI on this "supported" distribution ?

How are you connecting the screens to the card in your Eyefinity setup?

2 of the screens need to be connected to the card's DVI connectors. The third screen needs to be connected to the card's DisplayPort connector, either directly or using an active DisplayPort to DVI adapter. The only exception seems to be if you have the Sapphire Radeon HD 5770 FleX edition described at http://www.hardwareheaven.com/review...hics-card.html

[DarkFoss]

packages generated and installed fine on Mandriva 64bit.
Tessellation is fixed in Ungine heaven 2.1
[CODE]Unigine
Heaven Benchmark v2.1FPS: 16.2
Scores: 407
Min FPS: 4.7
Max FPS: 30.0

HardwareBinary: Linux 64bit GCC 4.3.2 Release May 20 2010
Operating system: Linux 2.6.35.1-desktop-69mib x86_64
CPU model: AMD Phenom(tm) II X3 720 Processor
CPU flags: 3215MHz MMX+ 3DNow!+ SSE SSE2 SSE3 SSE4A HTT
GPU model: ATI Radeon HD 5700 Series 4.0.10151 Compatibility Profile Context 1024Mb

SettingsRender: opengl
Mode: 1920x1080 fullscreen
Shaders: high
Textures: high
Filter: trilinear
Anisotropy: 16x
Occlusion: enabled
Refraction: enabled
Volumetric: enabled
Replication: disabled
Tessellation: normal

Getting closer to the performance in Windows as well
Nice drivers ATI Thanks :)

[CODE]Unigine
Heaven Benchmark v2.1FPS:	20.6
Scores:	518
Min FPS:	3.1
Max FPS:	49.9

HardwareBinary:	Windows 32bit Visual C++ 1500 Release May 21 2010
Operating system:	Windows 7 (build 7600) 64bit
CPU model:	AMD Phenom(tm) II X3 720 Processor
CPU flags:	3214MHz MMX+ 3DNow!+ SSE SSE2 SSE3 SSE4A HTT
GPU model:	ATI Radeon HD 5700 Series 8.762.0.0 1024Mb

SettingsRender:	direct3d11
Mode:	1920x1080 fullscreen
Shaders:	high
Textures:	high
Filter:	trilinear
Anisotropy:	4x
Occlusion:	enabled
Refraction:	enabled
Volumetric:	enabled
Replication:	disabled
Tessellation:	normal

[/CODE]

[Kano]

@Qaridarium

That happens when you don't use my script In that case you have to install depends on your own like:

sudo apt-get install dpkg-dev

[Fluggo]

How are you connecting the screens to the card in your Eyefinity setup?

2 of the screens need to be connected to the card's DVI connectors. The third screen needs to be connected to the card's DisplayPort connector, either directly or using an active DisplayPort to DVI adapter. The only exception seems to be if you have the Sapphire Radeon HD 5770 FleX edition described at http://www.hardwareheaven.com/review...hics-card.html

The screens (3x HP LA2405wg) is connected to both DVI's and the third directly to the displayport connector. All screens shows up in CCC but the third shows up as disabled. I have successfully enabled any two of them but never all three at once.

[Pfanne]

if i try to generat ubuntu/lucid .deb packages the fglrx-installer.log shows me:

Package build failed!
Package build utility output:
./packages/Ubuntu/ati-packager.sh: 385: dpkg-buildpackage: not found
[Error] Generate Package - error generating package : Ubuntu/lucid

works just fine for me using lucid

[migizi]

I'm sure this comment will create a flame war, but I'm going to give my 2 cents anyways. ATI/AMD has been quite open with specifications to help the open source community. They employ developers to write drivers for their hardware. I don't seem to run into the issues that everyone talks about. I run Arch with the vanilla driver install from ATI. While their drivers are not perfect in Linux, why don't people just stop ripping into ATI and help write the open source driver? The complaints sound like spoiled kids who don't get their way. "Mom the sandwich you made isn't very good." "Well make your own." "I don't want to, I want you to learn to make a better sandwich so I can continue to be spoiled."

If you find a bug, report it. Don't just go to the forums and complain about how bad things are and that your life completely sucks because something isn't going your way. Learn to fix it or stop complaining.

[nanonyme]

works just fine for me using lucid

No surprise, that looks like a user error. He's missing tools for creating deb packages.

[AnonymousCoward]

for that 10.6 version. someone just forget rewrite version number. it happend to windows driver too. check for driver and OpenGL version instead.