Announcement

Collapse
No announcement yet.

R600 Gallium3D Now Has Compute Shaders Working With NIR

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Etherman
    replied
    Originally posted by Raka555 View Post

    Which brand did you get ? Also the Sapphire ?
    Powercolor

    Leave a comment:


  • Raka555
    replied
    Originally posted by Etherman View Post

    Update! I've got my "Advanced Micro Devices, Inc. [AMD/ATI] RV730 XT [Radeon HD 4670]" and could not be happier with it!
    Fun thing is that it somehow runs vulkan stuff (vkcube, vulkaninfo) even if different users are logged in on the separate seats.
    Apparently it renders vulkan on the Polaris card and shows output on the HD 4670 display.
    Yes it can use Zink too. :-) So yeah!
    Which brand did you get ? Also the Sapphire ?

    Leave a comment:


  • ermo
    replied
    Originally posted by leipero View Post

    Those boards look fine for undervolting, I guess it's a combination of things or CPU itself, generally, when undervolting I would always disable all power saving features, as well as "boost" on the FX CPU.
    I suppose I could give one of the MSR tools floating around a go? They modify the P-States after the system has booted. That way I'm not stuck with whatever the Firmware decides the levels should be...

    Leave a comment:


  • Tomin
    replied
    Originally posted by Mez' View Post
    I bought a fanless XFX power supply though, which completely fried 2 years later in a bang (and cut the power in the process). I'm not sure I'm still confident in fanless. Yet, I believe there should be better solutions on the market, if only for GPUs. Up to the low mid-range market, it should be viable.
    I got a Seasonic that turns the fan off on low loads instead. It can go to about half the wattage I think without using the fan so it's mostly silent but it can still use it if there is need. And the fan is pretty quiet anyway.

    Leave a comment:


  • Raka555
    replied
    Originally posted by Etherman View Post

    Update! I've got my "Advanced Micro Devices, Inc. [AMD/ATI] RV730 XT [Radeon HD 4670]" and could not be happier with it!
    Fun thing is that it somehow runs vulkan stuff (vkcube, vulkaninfo) even if different users are logged in on the separate seats.
    Apparently it renders vulkan on the Polaris card and shows output on the HD 4670 display.
    Yes it can use Zink too. :-) So yeah!
    Grats !

    Leave a comment:


  • Etherman
    replied
    Originally posted by Raka555 View Post

    I have a fan-less hd4670. It uses so little power, it needs no additional power besides that from the PCIe slot.




    Not sure you can even find a silent card without any power connectors and with open-sources drivers in 2020 ...
    Update! I've got my "Advanced Micro Devices, Inc. [AMD/ATI] RV730 XT [Radeon HD 4670]" and could not be happier with it!
    Fun thing is that it somehow runs vulkan stuff (vkcube, vulkaninfo) even if different users are logged in on the separate seats.
    Apparently it renders vulkan on the Polaris card and shows output on the HD 4670 display.
    Yes it can use Zink too. :-) So yeah!

    Leave a comment:


  • leipero
    replied
    Originally posted by ermo View Post

    I don't know if it's just me having three lemons (board or CPU wise), but I've never succeeded in undervolting any of the 3 FX-8350s I own.

    For reference, the boards are an ASUS M5A88M EVO, an ASUS M5A97 PRO and an ASRock 970 Extreme3 R2.0.
    Those boards look fine for undervolting, I guess it's a combination of things or CPU itself, generally, when undervolting I would always disable all power saving features, as well as "boost" on the FX CPU.

    Leave a comment:


  • ermo
    replied
    Originally posted by leipero View Post

    This is so true it's not even funny. Even latter bulldozer that was criticized for running hot etc. was capable of working at -0.200v or more at the stock frequency, and that's huge, it usually ment at least 15c less (under full load) on the same cooling solution. This is also true for newer AMD CPUs, someone at AMD doesn't do his/her job correctly or they simply have to be more strict with motherboard manufacturers, I'm repeating this for years now...
    I don't know if it's just me having three lemons (board or CPU wise), but I've never succeeded in undervolting any of the 3 FX-8350s I own.

    For reference, the boards are an ASUS M5A88M EVO, an ASUS M5A97 PRO and an ASRock 970 Extreme3 R2.0.

    Leave a comment:


  • moriel5
    replied
    Interesting, the cover GPU is a Sapphire Radeon HD 6950 just like mine, but with a different shroud (mine looks similar to the shroud on the Sapphire Radeon HD 5850 Xtreme).

    Leave a comment:


  • drSeehas
    replied
    Originally posted by schmidtbag View Post
    ... There are passively cooled GT 1030s too, which don't require a power connector. ...
    There is a passively cooled GTX 1650 from Palit.
    https://www.palit.com/palit/vgapro.php?id=3494

    Edit: Mez' was faster.
    Last edited by drSeehas; 08-11-2020, 01:04 PM.

    Leave a comment:

Working...
X