Hello
I'm building a new PC for use with Open Suse, the motherboard is going to be an ASUS x99 Deluxe, the CPU is an i/ 5939, from all builds and comments that I've read so far there are 3 main choices for the RAM:
Corsair Vengeance LPX DDR4
G.Skill Ripjaw DDR4
Crucial Micron DDR4
The Corsair brand is also recommended over G.Skill and Crucial, the kit I plan to buy however is listed at 2 speeds/latency: 2400 and 2666, like this:
KIT #1
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2400MHz
Tested Latency: 14-16-16-31
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
KIT #2
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2666MHz
Tested Latency: 15-17-17-35
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
KIT #3
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2666MHz
Tested Latency: 16-18-18-35
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
At the moment, I have no intention of overcloaking but I don't discarded either, the difference in the 3 kits is the latency and speed, therefore which of the kits is the best match for the motherboard/CPU combination ?
I'm aware that the ram will default to 2133 until I enable XMP.2 on the motherboard.
Thank you.
I'm building a new PC for use with Open Suse, the motherboard is going to be an ASUS x99 Deluxe, the CPU is an i/ 5939, from all builds and comments that I've read so far there are 3 main choices for the RAM:
Corsair Vengeance LPX DDR4
G.Skill Ripjaw DDR4
Crucial Micron DDR4
The Corsair brand is also recommended over G.Skill and Crucial, the kit I plan to buy however is listed at 2 speeds/latency: 2400 and 2666, like this:
KIT #1
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2400MHz
Tested Latency: 14-16-16-31
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
KIT #2
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2666MHz
Tested Latency: 15-17-17-35
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
KIT #3
Technical Specifications
Density: 32GB (4x8GB)
Speed: 2666MHz
Tested Latency: 16-18-18-35
Voltage: 1.2V
Format: Unbuffered DIMM
Pin Out: 288 Pin
Intel XMP 2.0
Heatspreader: Anodized Aluminum
At the moment, I have no intention of overcloaking but I don't discarded either, the difference in the 3 kits is the latency and speed, therefore which of the kits is the best match for the motherboard/CPU combination ?
I'm aware that the ram will default to 2133 until I enable XMP.2 on the motherboard.
Thank you.
Comment