Announcement

Collapse
No announcement yet.

DDR3 Memory Scaling Performance With AMD's Athlon 5350

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Originally posted by AJSB View Post
    Thanks for the info...

    You should avoid go over much more than 105 because it will make VGA (if you use HDMI, no problem) and/or USB,etc. unstable....116 is a no go....but you can try to push it up to 107....some MoBos/APUs can go up to 107 w/o problems...
    I've tried that starting with 106 it is not more stable , 105 is just fine used it half a day now .

    Comment


    • #32
      Originally posted by dungeon View Post
      I've tried that starting with 106 it is not more stable , 105 is just fine used it half a day now .
      Did you check also the APU multiplier to see if it can be bumped up ?

      Before try to do it, pull back base clock again to 100...

      Comment


      • #33
        Originally posted by AJSB View Post
        PS In the mITX ASUS Mobo besides base APU clock , you can adjust APU `Multiplier`...check if also exists in your MoBo that option...*if* exists and allows more than 20.5 , you can bump CPU and GPU frequencies...go in small steps and makes tests and check temps...
        Yep APU Multiplier is there and can be set to more then 20.5. I setted it now to 21.0 and that is 50 MHz more. Together with the APU Frequency setted to 105, i running now at 2206 MHz

        Comment


        • #34
          Lats I bought RAM (three weeks ago), for 4gb sticks, 1600MHz was the cheapest speed. Several euros below 1066 and 800, so not even the price argument seems to hold

          Comment


          • #35
            Originally posted by dungeon View Post
            Yep APU Multiplier is there and can be set to more then 20.5. I setted it now to 21.0 and that is 50 MHz more. Together with the APU Frequency setted to 105, i running now at 2206 MHz
            Benchmarking Openarena 0.8.8 @ 1024x768 now to see what is gain from this OC and yay these two makes a good performance difference

            Default = @ 2050 MHz 60.5 fps

            21.0 multiplier and 105 freq = @ 2206 MHz 88.5 fps

            Comment


            • #36
              Originally posted by halfmanhalfamazing View Post
              I can't help but be curious (even though the chips appear to be in different classes) how Kaveri and Kabini stack up against each other.

              I have not seen benchmarks out there at all anywhere on this. Maybe I just missed them. If not, might make a good Phoronix article.
              SemiAccurate compared A10-7850k kaveri vs the 5350 kabini:
              http://semiaccurate.com/2014/04/09/a...et-soc-kabini/

              Comment


              • #37
                Originally posted by dungeon View Post
                Benchmarking Openarena 0.8.8 @ 1024x768 now to see what is gain from this OC and yay these two makes a good performance difference

                Default = @ 2050 MHz 60.5 fps

                21.0 multiplier and 105 freq = @ 2206 MHz 88.5 fps
                I don't expected this @ 1920x1080 too , but this APU has excelent overclocked performance

                Default = @ 2050 MHz 35.7 fps

                21.0 multiplier and 105 freq = @ 2206 MHz 56.7 fps

                With HyperZ enabled:

                Default = @ 2050 MHz 56.7 fps

                21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps

                Comment


                • #38
                  Originally posted by dungeon View Post
                  With HyperZ enabled:

                  Default = @ 2050 MHz 56.7 fps

                  21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps
                  Much of performance comes from just +0.5 multiplier adjustment , at default 2050 MHz and just set multiplier from 20.5 to 21.0 = 76.9 fps

                  Michael maybe also want to slightly overclock his Athlon 5350 .

                  Comment


                  • #39
                    AJSB asks: yes it runs with the same temperature , but one sad thing is it just allows 21.0 multiplier as maximum .

                    So that is it from me about overcloking this athlon i think i couldn't gain more from this hardware an memory , but even that makes excelant difference 20.05>21.0 multiplier and 100>105 freq all stable for me
                    Last edited by dungeon; 13 April 2014, 07:17 AM.

                    Comment


                    • #40
                      Originally posted by dungeon View Post
                      I don't expected this @ 1920x1080 too , but this APU has excelent overclocked performance

                      Default = @ 2050 MHz 35.7 fps

                      21.0 multiplier and 105 freq = @ 2206 MHz 56.7 fps

                      With HyperZ enabled:

                      Default = @ 2050 MHz 56.7 fps

                      21.0 multiplier and 105 freq = @ 2206 MHz 81.2 fps
                      Nah sorry , must point out i overlooked that i run 0.8.5 actually and compared it with results of 0.8.8 . So there is no actually any notable gain in games, stable overclock is only 150MHz plus for me that is plus 7% - all in all it is not really something to worry about if your board doesn't have it .

                      Comment

                      Working...
                      X