Originally posted by GreatEmerald
View Post
Announcement
Collapse
No announcement yet.
Benchmarking The Intel P-State, CPUfreq Changes
Collapse
X
-
-
Originally posted by Ericg View PostAre you running cpupowerd?
Leave a comment:
-
Originally posted by Druedain View PostI think P state is broken, or devs in Arch Linux broke something. In Powersave cpu is always at the lowest frequency and it's terrible when working. Performance is buggy and after suspend cpu can be constantly at highest frequency? Also (at least in Arch) you have to set manually Performance after every reboot, because it's not remembered as with cpufreq governors.
I've switched off it and now I'm waiting for fixes?
I can't comment on the suspend isues but the issue of setting it at every boot seems a bit odd. Are you running cpupowerd? If you performance as the default governor in /etc/default/cpupower and enable the cpupowerd service then it should auto-set to performance. Also I doubt the Arch devs broke anything, they dont modify kernels, that being said, p-states COULD be broken in some way.
Back onto the article though... I'm running 3.10rc1 on Arch using the P-State governor and quite honestly...it seems to be working. My power usage hasn't gone up, and maybe its thermald or maybe its both P-state and thermald working together but my thermal temps have never been lower and in this laptop the ONLY thing generating heat is pretty much the Intel die since its a Sandy Bridge laptop with no discrete GPU.
Leave a comment:
-
Originally posted by Druedain View PostI think P state is broken, or devs in Arch Linux broke something. In Powersave cpu is always at the lowest frequency and it's terrible when working. Performance is buggy and after suspend cpu can be constantly at highest frequency? Also (at least in Arch) you have to set manually Performance after every reboot, because it's not remembered as with cpufreq governors.
I've switched off it and now I'm waiting for fixes?
Leave a comment:
-
I can usually guess the result of the benchmark before reading the article. If anything big happened the title would reflect it, if nothing much changed it just says like "benchmarking X with Y".
Leave a comment:
-
I think P state is broken, or devs in Arch Linux broke something. In Powersave cpu is always at the lowest frequency and it's terrible when working. Performance is buggy and after suspend cpu can be constantly at highest frequency? Also (at least in Arch) you have to set manually Performance after every reboot, because it's not remembered as with cpufreq governors.
I've switched off it and now I'm waiting for fixes?
Leave a comment:
-
Perfomance not the issue
What you should really measure is %time idle and power consumption. In switching from ondemand to performance, I saw %idle go from ~50% to ~95% (C6-IVB).
It honestly doesn't make much of a difference when idle (~94% idle to ~99%), but when only one thread is under load, it's a nice improvement.
Maybe break out your killawatt?
Leave a comment:
-
Interesting, so using P-state powersave mode shouldn't cause performance issues in mesa, while it does if using cpufreq. Can't wait to see the power usage benchmarks.
Originally posted by wargames View PostCould it be that only some specific processors are affected by the performance/ondemand bug ?
Leave a comment:
-
Could it be that only some specific processors are affected by the performance/ondemand bug ?
Leave a comment:
Leave a comment: