Linux Catalyst 7.12 (fglrx), corrupt 3d output

[Lipti]

Hello,

I installed the new linux catalyst 7.12 driver for my built-in ATI FireGl T2-128 (IBM T41p). I'm using Debian testing distribution and didn't have problems with fglrx 8.40.4 (the versions between 8.40.4 and 8.443.1 [Catalyst 7.12] didn't work with the FireGl).

Since the new driver officially supports my graphics card, I tried the new driver.

2D output works without any problems but 3D output is corrupt:


Does anyone have hints to avoid this problem?

[Dandel]

not enough information is provided, can you please post a copy of your xorg.conf file to see if that lists something, oh and don't forget the xorg.0.log file also ( grepped for fglrx, ogl, opengl, etc )

[Lipti]

not enough information is provided, can you please post a copy of your xorg.conf file to see if that lists something, [...]

Sure:

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
        # path to defoma fonts
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "bitmap"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "int10"
        Load  "vbe"
        Load  "GLcore"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "de"
        Option      "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ImPS/2"
        Option      "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"
        Option      "SendCoreEvents" "true"
        Option      "Device" "/dev/psaux"
        Option      "Protocol" "auto-dev"
        Option      "HorizScrollDelta" "0"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
        Option      "EnableMonitor" "lvds,tmds1"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Virtual   1400 1050
                Depth     24
                Modes    "1400x1050" "1280x1024"
        EndSubSection
EndSection

I tried the new driver with the following additions to the Device-section without success, too:

        Option "VideoOverlay" "on"
        Option "OpenGLOverlay" "off"
        Option "BlockSignalsOnLock" "on"
        Option "UseFastTLS" "2"
        Option "KernelModuleParm" "locked-userpages=0"
        Option "no_accel" "no"
        Option "no_dri" "no"
        Option "EnablePrivateBackZ" "no"
        Option "backingstore" "true"
        Option "XAANoOffscreenPixmaps" "true"

oh and don't forget the xorg.0.log file also ( grepped for fglrx, ogl, opengl, etc )

Since I went back to version 8.40.4 (the new driver was unusable without 3d output), the Xorg.0.log was overwritten by the old driver. I'm going to switch to the new driver again to post the Xorg.0.log...

[Lipti]

[...]oh and don't forget the xorg.0.log file also ( grepped for fglrx, ogl, opengl, etc )

Here we go (part one of two because of 10k characters limitation):

(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
(II) fglrx(0): pEnt->device->identifier=0x8203848
(II) fglrx(0): === [atiddxPreInit] === begin, [x]
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "EnableMonitor" "lvds,tmds1"
(**) fglrx(0): Option "DPMS" "true"
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI MOBILITY FIRE GL T2/T2e" (Chipset = 0x4e54)
(--) fglrx(0): (PciSubVendor = 0x1014, PciSubDevice = 0x054f)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
(--) fglrx(0): MMIO registers at 0xc0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131008 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600   
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: GL10
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Connected Display1: DFP on internal TMDS [tmds1]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: ENC  Model: 1833  Serial#: 16843009
(II) fglrx(0): Year: 2006  Week: 42
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 38  vert.: 30
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.330   greenX: 0.290 greenY: 0.605
(II) fglrx(0): blueX: 0.145 blueY: 0.075   whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 108.0 MHz   Image Size:  376 x 301 mm
(II) fglrx(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) fglrx(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) fglrx(0): Serial No: 42744106
(II) fglrx(0): Ranges: V min: 59  V max: 61 Hz, H min: 31  H max: 64 kHz, PixClock max 110 MHz
(II) fglrx(0): Monitor name: S1931
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 	00ffffffffffff0015c3331801010101
(II) fglrx(0): 	2a10010380261e78eae415a3544a9b25
(II) fglrx(0): 	135054a1080081800101010101010101
(II) fglrx(0): 	010101010101302a009851002a403070
(II) fglrx(0): 	1300782d1100001e000000ff00343237
(II) fglrx(0): 	34343130360a20202020000000fd003b
(II) fglrx(0): 	3d1f400b000a202020202020000000fc
(II) fglrx(0): 	0053313933310a202020202020200009
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - DFP on internal TMDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  3 power states available:
(II) fglrx(0):   1. 317/203MHz @ 50Hz [enable load balancing]
(II) fglrx(0):   2. 111/111MHz @ 50Hz [low voltage, enable sleep]
(II) fglrx(0):   3. 270/203MHz @ 50Hz [thermal diode mode]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 14 modes found for primary display.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"   38.16  1024 1048 1152 1280  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   31.48  848 864 952 1056  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   32.66  720 744 816 912  576 577 580 597 +hsync
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   26.71  720 736 808 896  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan
(--) fglrx(0): Display dimensions: (380, 300) mm
(--) fglrx(0): DPI set to (93, 88)
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"  108.00  1280 1328 1440 1688  1024 1025 1028 1066
(**) fglrx(0):  Default mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"   81.62  1152 1216 1336 1520  864 865 868 895 +hsync
(**) fglrx(0):  Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 +hsync +vsync
(**) fglrx(0):  Default mode "1024x480": 38.2 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x480"   38.16  1024 1048 1152 1280  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "848x480": 31.5 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"   31.48  848 864 952 1056  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628
(**) fglrx(0):  Default mode "720x576": 32.7 MHz (scaled from 0.0 MHz), 35.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"   32.66  720 744 816 912  576 577 580 597 +hsync
(**) fglrx(0):  Default mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"   26.71  720 736 808 896  480 481 484 497 +hsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.18  640 656 752 800  480 490 492 525 +hsync +vsync
(**) fglrx(0):  Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"   24.92  640 664 760 792  400 460 462 525
(**) fglrx(0):  Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"   19.81  512 544 624 664  384 451 453 497
(**) fglrx(0):  Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"   22.33  400 416 480 496  300 601 605 742 doublescan
(**) fglrx(0):  Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"   12.59  320 328 376 400  240 491 493 525 doublescan
(**) fglrx(0):  Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"   12.59  320 336 384 400  200 457 459 524 doublescan

[Lipti]

Last part:

(==) fglrx(0): NoAccel = NO
(==) fglrx(0): HPV inactive
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xd0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [pcie] 0 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.0.0
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [drm] mapped SAREA 0x2000 to 0xb75df000
(II) fglrx(0): [drm] framebuffer handle = 0x3000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.44.3
(II) fglrx(0):     Date: Dec 19 2007
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.22-3-686
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00004000
(II) fglrx(0): FIREGL Board Found
(II) fglrx(0): Interrupt handler installed at IRQ 11.
(II) fglrx(0): Exposed events to the /proc interface
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xe0140000 FBMappedSize: 0x007ae400
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,1430)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 380
(==) fglrx(0): Backing store disabled
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so

Thanks in advance!

[Dandel]

I don't know if this will fix the issue, but here's a modified version of your xorg which might fix the issues, with details taken from the gentoo wiki over how to use fglrx drivers.

Section "ServerLayout"
        Identifier     "Default Layout"
        Screen      0  "aticonfig-Screen[0]" 0 0
        InputDevice    "Generic Keyboard"
        InputDevice    "Configured Mouse"
        InputDevice    "Synaptics Touchpad"
EndSection

Section "Files"
        # path to defoma fonts
        FontPath     "/usr/share/fonts/X11/misc"
        FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
        FontPath     "/usr/share/fonts/X11/Type1"
        FontPath     "/usr/share/fonts/X11/100dpi"
        FontPath     "/usr/share/fonts/X11/75dpi"
        FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
        Load  "bitmap"
        Load  "dri"
        Load  "extmod"
        Load  "freetype"
        Load  "int10"
        Load  "vbe"
        Load  "GLcore"
EndSection

Section "InputDevice"
        Identifier  "Generic Keyboard"
        Driver      "kbd"
        Option      "CoreKeyboard"
        Option      "XkbRules" "xorg"
        Option      "XkbModel" "pc105"
        Option      "XkbLayout" "de"
        Option      "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
        Identifier  "Configured Mouse"
        Driver      "mouse"
        Option      "CorePointer"
        Option      "Device" "/dev/input/mice"
        Option      "Protocol" "ImPS/2"
        Option      "Emulate3Buttons" "true"
EndSection

Section "InputDevice"
        Identifier  "Synaptics Touchpad"
        Driver      "synaptics"
        Option      "SendCoreEvents" "true"
        Option      "Device" "/dev/psaux"
        Option      "Protocol" "auto-dev"
        Option      "HorizScrollDelta" "0"
EndSection

Section "Monitor"
        Identifier   "aticonfig-Monitor[0]"
        Option      "VendorName" "ATI Proprietary Driver"
        Option      "ModelName" "Generic Autodetecting Monitor"
        Option      "DPMS" "true"
EndSection

Section "Device"
        Identifier  "aticonfig-Device[0]"
        Driver      "fglrx"
        Option      "EnableMonitor" "lvds,tmds1"
	Option      "MergedFB"      "true"
	#Option      "UseFastTLS"                 "0"
	# UseFastTLS not sure what this does, but it changes wine and other apps.
	# 0 = fast
        # 1 = faster
        # 2 = compatable ( some wine apps need this. )
	# private Back Z, fixes Z plane issues.
	Option      "EnablePrivateBackZ"         "on"
EndSection

Section "Screen"
        Identifier "aticonfig-Screen[0]"
        Device     "aticonfig-Device[0]"
        Monitor    "aticonfig-Monitor[0]"
        DefaultDepth     24
        SubSection "Display"
                Viewport   0 0
                Virtual   1400 1050
                Depth     24
                Modes    "1400x1050" "1280x1024"
        EndSubSection
EndSection
Section "DRI"
	Mode	0666
EndSection

[Lipti]

I don't know if this will fix the issue, but here's a modified version of your xorg which might fix the issues, with details taken from the gentoo wiki over how to use fglrx drivers.

Thank you for your suggestion but the problem still occurs :-(. I can post the new Xorg.0.log if you think it could help?

[elcorazon]

Set Anti-Aliasing

Hi

for me it helped to set some anti-aliasing in the Catalyst Control Center.
Funny thing if it wasn't that sad...

Greets

[Lipti]

for me it helped to set some anti-aliasing in the Catalyst Control Center.
Funny thing if it wasn't that sad...

This workaround works for me, too! Thank you very much!
Setting antialiasing to 2x and the 3d corruption was gone. Though reducing the frames per second :-(.

The AMD/ATI support didn't want to help me because I'm using a mobility version of the FireGl T2-128! Next graphics card will be a NVidia.

[linux007]

Hi,
I have same problem with my IBM T42P and FireGL Mobility T2, but I'm not able to set some anti-aliasing value in the Catalyst Control Center, because it's grayed (unactive).
I tryed to set Option "FSAAEnable" in xorg.conf, but nothing was change (I found "(WW) fglrx(0): Option "FSAAEnable" is not used" message in log). Do you know, how I can solve it? Thanks