No announcement yet.

Building a new desktop: hardware advice

  • Filter
  • Time
  • Show
Clear All
new posts

  • dotancohen
    started a topic Building a new desktop: hardware advice

    Building a new desktop: hardware advice

    I am building a new desktop machine for home use (no gaming, but we will output DVD and MPEG movies to the TV). I would appreciate the Phoronix community's opinion regarding my hardware selection, as this is the first non-MS machine that I am building. I have tried to select components known to work with Linux in general, these are the components:

    Athlon 64 5200+

    Asus M3A board
    (we need both IDE and SATA, as my current 500GB hard drives are IDE)

    2 GB Kingston Value memory

    One of these video cards:
    I am leaning towards the second card because of the quiet fanless design, but I am a bit concerned about a fanless card. It also mentions OpenGL 2.0 compliance, which sounds good.

    Optiarc AD-7200S DVD?RW sata DVD burner

    This machine will likely flip flop between Debian and Fedora about once per year, with the occasional test drive of a different distro. I am on a budget, so I tried to cut corners but not too many. Any advice and suggestions regarding the hardware mentioned are much appreciated. Thanks.

  • deanjo
    If your going a ATI based chipset for a MB I would recommend switching that optical drive to a parallel based one instead of a Sata based drive and purchase some IDE --> Sata converters for your harddrives. Sata+Optical= can result in really weird issues ranging from drives not showing up to disappearing. Given ATI's southbridge Sata issues, the safest route would be to go with a ATA optical.

    Leave a comment:

  • Dandel
    ok, well first off, i'd look at integrating as much as you can in to the board if your looking for linux.

    Biostar TFORCE TA790GX3 A2+ which has the following ready to go.
    • HDMI, DVI and VGA built in.
    • Radeon HD3300 video card w/ built in video memory ( 128mb )
    • completely fanless.
    • 2x 16X pci express slots and 2x 1X Pci express ( both are v2.0 )

    as for the network, it's gigabit and has good linux support ( you can pick up the driver from )
    similar story with the sound card... also made by realtek.

    Leave a comment: