SilverStone Milo ML01

Written by Michael Larabel in Enclosures on 29 September 2006 at 01:00 PM EDT. Page 3 of 5. Add A Comment.

Opening up the SilverStone Milo ML01 we finally see the unique layout of the chassis. The MoDT ML01 case supports micro ATX motherboards, one internal 3.5" drive bay, and the previously mentioned external drive bays. There is also one 80mm intake fan at the front of the chassis. This fan pushes 19 CFM and produces 20.65 dBA.

Due to the size of the case, the external drive bays come very close to the power supply, but the workroom in this area should be adequate for most devices. SilverStone's placement of the internal 3.5" drive bay was also interesting. Hard drives can be mounted perpendicularly to the external drive bays, and the positioning places the drive directly in front of the intake fan. The hard drive sits just millimeters off the bottom of the case. This design certainly makes the airflow very efficient while keeping to a compact design, but it would have been nice if the ML01 had supported multiple drives.


The room around the micro ATX motherboard area is sufficient for installation and the 300W PSU wires are long enough to reach all areas of the case.


Related Articles