Hy.
I'am tryng to use xf86-fideo-radeon on an M3A78-EMH HDMI board wich has an amd 780g with gentoo linux disstro.
but kep geting the fwoloing error.
X.Org X Server 1.5.99.1
Release Date: (unreleased)
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-gentoo i686
Current Operating System: Linux vdr-box 2.6.26-gentoo #9 SMP Sat Jul 26 14:03:01 Local time zone must be set--see zic i686
Build Date: 29 July 2008 02:26:29PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Jul 30 13:48:06 2008
(++) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) module ABI major version (0) doesn't match the server's version (1)
(EE) Failed to load module "glx" (module requirement mismatch, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
X: symbol lookup error: /usr/lib/xorg/modules/drivers//radeonhd_drv.so: undefined symbol: xf86stat
can somebody help me?? with this??
the xorg.conf file is this :
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
#Section "Files"
# RgbPath "/usr/lib/X11/rgb"
#EndSection
Section "Module"
Load "type1"
Load "fbdevhw"
# Load "ddc"
# Load "vbe"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync 30.0 - 110.0
# VertRefresh 50.0 - 150.0
Identifier "LVDS"
VendorName "Siemens"
ModelName "LCD"
# HorizSync 30-107
# VertRefresh 48-120
Option "DPMS" "true"
# Option "RightOf" "Panel"
EndSection
Section "Device"
Option "BusType" "PCIE"
Identifier "HD3200"
Driver "radeonhd"
# BusID "PCI:1:5:0"
VendorName "amd Corporation"
# Option "DRI"
Option "MonitorLayout" "TMDS"
Option "NoRandR"
Option "AccelMethod" "XXA"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "TripleBuffer" "true"
Option "DMAForXv" "true"
Option "GARTSize" "64"
Option "DinamicClocks" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "HD3200"
Monitor "LVDS"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
I'am tryng to use xf86-fideo-radeon on an M3A78-EMH HDMI board wich has an amd 780g with gentoo linux disstro.
but kep geting the fwoloing error.
X.Org X Server 1.5.99.1
Release Date: (unreleased)
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-gentoo i686
Current Operating System: Linux vdr-box 2.6.26-gentoo #9 SMP Sat Jul 26 14:03:01 Local time zone must be set--see zic i686
Build Date: 29 July 2008 02:26:29PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/usr/var/log/Xorg.0.log", Time: Wed Jul 30 13:48:06 2008
(++) Using config file: "/etc/X11/xorg.conf"
(EE) Failed to load module "type1" (module does not exist, 0)
(EE) module ABI major version (0) doesn't match the server's version (1)
(EE) Failed to load module "glx" (module requirement mismatch, 0)
(EE) Failed to load module "freetype" (module does not exist, 0)
X: symbol lookup error: /usr/lib/xorg/modules/drivers//radeonhd_drv.so: undefined symbol: xf86stat
can somebody help me?? with this??
the xorg.conf file is this :
Section "ServerLayout"
Identifier "Layout0"
Screen "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
#Section "Files"
# RgbPath "/usr/lib/X11/rgb"
#EndSection
Section "Module"
Load "type1"
Load "fbdevhw"
# Load "ddc"
# Load "vbe"
# Load "GLcore"
Load "dbe"
# Load "dri"
Load "extmod"
Load "glx"
Load "freetype"
EndSection
Section "InputDevice"
# generated from data in "/etc/conf.d/gpm"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync 30.0 - 110.0
# VertRefresh 50.0 - 150.0
Identifier "LVDS"
VendorName "Siemens"
ModelName "LCD"
# HorizSync 30-107
# VertRefresh 48-120
Option "DPMS" "true"
# Option "RightOf" "Panel"
EndSection
Section "Device"
Option "BusType" "PCIE"
Identifier "HD3200"
Driver "radeonhd"
# BusID "PCI:1:5:0"
VendorName "amd Corporation"
# Option "DRI"
Option "MonitorLayout" "TMDS"
Option "NoRandR"
Option "AccelMethod" "XXA"
Option "ColorTiling" "on"
Option "EnablePageFlip" "true"
Option "TripleBuffer" "true"
Option "DMAForXv" "true"
Option "GARTSize" "64"
Option "DinamicClocks" "on"
EndSection
Section "Screen"
Identifier "Screen0"
Device "HD3200"
Monitor "LVDS"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Comment