Hi Oibaf,
I have a Dell 600 with Radeon 9000 ( R200 ).
Since follwing the manipulations proposed. i changed from almost 900 glxgears to:
980 frames in 5.1 seconds = 191.703 FPS
960 frames in 5.1 seconds = 187.907 FPS
A quicktest of glxinfo:
glxinfo | grep 'direct rendering'
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
I see in the logs that the R200 microcode is loaded.
My Xorg session looks like this:
Section "Device"
Identifier "Configured Video Device"
Driver "ati"
#Option "AccelMethod" "EXA"
Option "AccelMethod" "XAA"
EndSection
There is two accelmethods just because i tried both to see if something changes but no results.
Do you have any idea?
Ps: fglrx is not installed.
I have a Dell 600 with Radeon 9000 ( R200 ).
Since follwing the manipulations proposed. i changed from almost 900 glxgears to:
980 frames in 5.1 seconds = 191.703 FPS
960 frames in 5.1 seconds = 187.907 FPS
A quicktest of glxinfo:
glxinfo | grep 'direct rendering'
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
I see in the logs that the R200 microcode is loaded.
My Xorg session looks like this:
Section "Device"
Identifier "Configured Video Device"
Driver "ati"
#Option "AccelMethod" "EXA"
Option "AccelMethod" "XAA"
EndSection
There is two accelmethods just because i tried both to see if something changes but no results.
Do you have any idea?
Ps: fglrx is not installed.
Comment