Page 3 of 3 FirstFirst 123
Results 21 to 23 of 23

Thread: OpenGL 3.3 Support Lands For RadeonSI Gallium3D

  1. #21


    Quote Originally Posted by Tyler_K View Post
    Well all you who pay much more attention to the nitty gritty details of the devices would know better then I (about the position the device takes in the performance/capabilities echelon), but see Pontostroy's results here with a 7790:

    Also note Alex's suggestion just further down in the thread in regards to turning on tiling.

    Given those pts, I'd guess that 24fps isn't rubbish at all .... (again, I'm not an expert as to which cards are uber fast and which ones are not)
    I see what you mean. Maybe I was underestimating Uniengine Valley.

  2. #22
    Join Date
    Mar 2012


    Quote Originally Posted by Pontostroy View Post
    No, intel and radeonsi very stable for my 7790 and hd2500, but DRI_PRIME don't work. I had gpu hangs and other kernel related problem, didn't see X segfaults in a long time.

    Can you provide some logs or backtrace?
    [ 6082.060] (EE)
    [ 6082.060] (EE) Backtrace:
    [ 6082.060] (EE) 0: /usr/bin/Xorg (xorg_backtrace+0x48) [0x58be18]
    [ 6082.060] (EE) 1: /usr/bin/Xorg (0x400000+0x18fb09) [0x58fb09]
    [ 6082.060] (EE) 2: /lib64/ (0x7fbab8cb3000+0xf9f0)
    [ 6082.060] (EE) 3: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0x2a28a) [0x7fbab331428a]
    [ 6082.060] (EE) 4: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0xd4bf1) [0x7fbab33bebf1]
    [ 6082.060] (EE) 5: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0xd5695) [0x7fbab33bf695]
    [ 6082.060] (EE) 6: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0xdb9d9) [0x7fbab33c59d9]
    [ 6082.060] (EE) 7: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0x4fab1) [0x7fbab3339ab1]
    [ 6082.060] (EE) 8: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0x31554) [0x7fbab331b554]
    [ 6082.060] (EE) 9: /usr/lib64/xorg/modules/drivers/
    (0x7fbab32ea000+0x3184b) [0x7fbab331b84b]
    [ 6082.061] (EE) 10: /usr/bin/Xorg (0x400000+0x1195fa) [0x5195fa]
    [ 6082.061] (EE) 11: /usr/bin/Xorg (0x400000+0x39791) [0x439791]
    [ 6082.061] (EE) 12: /usr/bin/Xorg (0x400000+0x3d23e) [0x43d23e]
    [ 6082.061] (EE) 13: /usr/bin/Xorg (0x400000+0x4106a) [0x44106a]
    [ 6082.061] (EE) 14: /lib64/ (__libc_start_main+0xf5)
    [ 6082.061] (EE) 15: /usr/bin/Xorg (0x400000+0x2c601) [0x42c601]
    [ 6082.061] (EE)
    [ 6082.061] (EE) Segmentation fault at address 0x18
    [ 6082.061] (EE)
    Fatal server error:
    [ 6082.061] (EE) Caught signal 11 (Segmentation fault). Server aborting
    [ 6082.061] (EE)
    [ 6082.061] (EE)
    Please consult the The X.Org Foundation support
    for help.
    [ 6082.061] (EE) Please also check the log file at "/var/log/Xorg.0.log" for
    additional information.
    [ 6082.061] (EE)
    [ 6082.061] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 6082.183] (EE) Server terminated with error (1). Closing log file.

    Something like this was yesterday. Also this crash happened today. Once I updated x-server from your repo everything looks fine so far. Hopefully the issue is resolved.
    As for DRI_PRIME it works fine on my muxless laptop. There is an issue with intel driver in 3.13 (bug report was filled), radeonsi shows an error (another bug report exists) and runpm doesn't work properly (again there is a bug report). Once all this stuff is fixed I can say that open source drivers are in much-much better state than catalyst.

  3. #23
    Join Date
    Sep 2013


    Quote Originally Posted by Pontostroy View Post
    for mesa,xorg,etc
    zypper ar  pont_x11
    zypper ref
    zypper dup --from pont_x11
    zypper ar kern
    zypper ref
    zypper up
    Finally got around to doing this. Alternatively, could I just add those two repos, up their priority over the openSUSE repos (from 99 to 98), and then just do zypper dup?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts