Page 1 of 3 123 LastLast
Results 1 to 10 of 42

Thread: AMD Kaveri's Open Radeon Performance Now Multiple Times Faster

Hybrid View

  1. #1
    Join Date
    Jan 2007
    Posts
    14,653

    Default AMD Kaveri's Open Radeon Performance Now Multiple Times Faster

    Phoronix: AMD Kaveri's Open Radeon Performance Now Multiple Times Faster

    Earlier this month I shared some basic OpenGL benchmarks between AMD's Kaveri APU on the Catalyst driver and the open-source RadeonSI Gallium3D driver. Now that more time has passed I'm back with another round of Linux graphics driver testing on the AMD A10-7850K, this time looking at the impact when forcing Dynamic Power Management and toggling color tiling for maximum performance.

    http://www.phoronix.com/vr.php?view=19776

  2. #2
    Join Date
    Oct 2008
    Posts
    3,102

    Default

    It's interesting to see color tiling make such a big difference in a lot of those tests. I hadn't realized it was that important.

    It's too bad they have to just wait until most people are using new versions of everything before they can turn it on. Isn't there a way to check versioning and default it to ON if all the right software is present, and OFF if someone has an old libdrm or kernel? Or whatever is holding it back?

  3. #3
    Join Date
    Nov 2010
    Posts
    367

    Default

    So um, does this color tiling work on other GPUS, and how does one enable it?

  4. #4
    Join Date
    Oct 2008
    Posts
    3,102

    Default

    Quote Originally Posted by Dukenukemx View Post
    So um, does this color tiling work on other GPUS, and how does one enable it?
    it's an xorg.conf setting. It's enabled by default for quite a while on most gpus.

    Option "ColorTiling" "on"
    Option "ColorTiling2D" "on"
    Last edited by smitty3268; 01-28-2014 at 01:25 AM.

  5. #5
    Join Date
    Jun 2009
    Posts
    2,927

    Default

    Quote Originally Posted by smitty3268 View Post
    It's interesting to see color tiling make such a big difference in a lot of those tests. I hadn't realized it was that important.
    It should be especially important for APUs because they deal with much slower memory access than discrete GPUs, so reducing memory transfers is valuable.

  6. #6
    Join Date
    Jun 2014
    Posts
    1

    Default

    I know it's an old thread, but it's exactly the same matter, so....

    When I create the file in xorg.conf.d my sytem won't boot anymore and when I edit xorg.conf it doesn't change anything and still shows me that Color Tiling is disabled. Any suggestion what I could try?

    I'm running Fedora with Kernel 3.14.4-200 and Mesa 10.1.3.
    CPU: A10-7850k

    Thanks for your help.

  7. #7
    Join Date
    Jan 2014
    Location
    Belgrade, Serbia
    Posts
    25

    Default

    Quote Originally Posted by phoronix View Post
    Phoronix: AMD Kaveri's Open Radeon Performance Now Multiple Times Faster

    Earlier this month I shared some basic OpenGL benchmarks between AMD's Kaveri APU on the Catalyst driver and the open-source RadeonSI Gallium3D driver. Now that more time has passed I'm back with another round of Linux graphics driver testing on the AMD A10-7850K, this time looking at the impact when forcing Dynamic Power Management and toggling color tiling for maximum performance.

    http://www.phoronix.com/vr.php?view=19776
    I see that you have (in this test) the same motherboard that I have (Gigabyte F2A88XM-D3H). I am having a lot of difficulties with this motherboard's BIOS.
    Can you, please, try some things to confirm those issues for me?

    Issues are:

    Firts, CPU is at 100% load in BIOS (version F4 and F5). It reaches higher temperatures than in OS during gaming.

    Second, when I enable X.M.P. 2400 (I have 2x4 GB Kingstone HyperX Beast 2400 MHz CL11 RAM), OS won't boot. It only works with X.M.P. 1600 and 2133. I saw in other test that you also have (or had, at least) the same RAM.

    And, third, the worst one, is that I can not change any values in BIOS (like 2/3). For example, I can not change latency for RAM. I have set it to "Manual" or "Advance manual" instead of "Auto", and those values turn blue (from gray) so I should be able to change them now, but when I press "Enter" nothing hapens (no options apear, no drop-down menu, nothing). And that is the issue with like 2/3 of BIOS setttings/values.

    I have tried F4 and F5. They are the same. I have also adressed this issues to Gigabyte, but still no reply. I haven't been able to find anyone that owns the same motherboard to ask them to verify this.

    I would really appreciate your help.
    Last edited by Слободан; 01-28-2014 at 02:44 AM.

  8. #8
    Join Date
    Jan 2008
    Posts
    107

    Default

    Hi,

    I didn't check Kaveri on open source drivers yet, but with Catalyst 13.300 it works fine (I patched drivers and it works with 3.13). I have Asrock FM2A88M Extreme4+ (with the latest v2.0 UEFI) with Kingston 2400MHz and all works fine (memory works in dual channel mode at 2400MHz via XMP profile). I use Ubuntu 14.04 x64. Today I'll try to install PTS and submit some test results, anyway just in 1280x1024.

    Cheers,

  9. #9
    Join Date
    Sep 2013
    Posts
    132

    Default

    Quote Originally Posted by Слободан View Post
    Second, when I enable X.M.P. 2400 (I have 2x4 GB Kingstone HyperX Beast 2400 MHz CL11 RAM), OS won't boot. It only works with X.M.P. 1600 and 2133. I saw in other test that you also have (or had, at least) the same RAM.
    I don't own your board but as general rule: Raise your RAM voltage and if it does not help you could try rasing north bridge voltage, too.

  10. #10
    Join Date
    Aug 2009
    Location
    Russe, Bulgaria
    Posts
    511

    Default

    Michael, there is no Doom3 graph in the article.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •