Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 36

Thread: DDR3-2400MHz On AMD's A10 Kaveri With Kingston's HyperX Beast

  1. #11

    Default

    @ Larabel, now do what every other site would do and OC the ram, both of your best kits at 1.65v or if you are feeling daring the max safe 24/7 voltages(depends on the ICs on the stick, I've seen between 1.7-2.1v while the JEDEC standard is 1.65v)

    Quote Originally Posted by fteoOpty64 View Post
    That would mean cutting back on a pair of gpu cores which you would not want. Or cutting back ona pair of cpu cores which most people would really scream!. At 2.41B transistors, the die size is fully used for all the components in this system. It is a pity that 28HPM process does not allow the stock speed to be at 4.2Ghz turboed to 4.8Ghz. But if you look at OC Kaveri systems running at 4.6Ghz, the performance numbers were what people really expects from it. I say, anybody can get this performance and even tweak the gpu speeds closer to 1Ghz from the stock 720Mhz. I am sure 900Mhz is pretty much a given for OC capability of the 8 gpu cores. As a K class chip, it is built for OC users, so throw the most from your wanted RAM and Cooler. It is the fun bit.

    Some BIOS has two profiles, I tend to use one for OC-Full and one for Unclocking leaving it as a server. It works pretty for each of the purposes.
    DIY a liquid cooling setup and you can easily hit 5Ghz 24/7 stable, OCing the GPU doesn't help much as it's ram bandwidth starved, though there are situations where it will have some difference.
    Last edited by Kivada; 01-24-2014 at 04:56 AM.

  2. #12

    Default

    Quote Originally Posted by UraniumDeer View Post
    I must admit that I'm a little curious about 2600 MHz as well. I don't think that the motherboard used in this test supports more than 2400 MHz. I did a bit of research on motherboards after reading the first test. ASRock makes motherboards that supports 2600 MHz, such as their ASRock FM2A88X Extreme6+.
    Those are not the actual limits, you can push much higher then that, that same board pushed a 6800K to 7.9Ghz on LN2, the unofficial ram OCs are also very high. I'd be surprised if it wouldn't take 1.65v DDR3 3100Mhz kits without blinking with standard air cooling. Problem is they are a few grand for the kits binned that high.

  3. #13
    Join Date
    Nov 2009
    Location
    Bratislava, Slovakia
    Posts
    50

    Default

    There is some evidence that the Kaveri may support a quad-channel memory.
    http://www.anandtech.com/show/7702/a...e-gddr5-option
    If it will be supporting it on new socket I will probably buy it for testing.

  4. #14
    Join Date
    Jun 2013
    Posts
    65

    Default

    Quote Originally Posted by pixo View Post
    There is some evidence that the Kaveri may support a quad-channel memory.
    http://www.anandtech.com/show/7702/a...e-gddr5-option
    If it will be supporting it on new socket I will probably buy it for testing.
    According to that article, the pinout hinders use of quad-channel memory.
    That sucks, considering that Carrizo (according to this) will be using FM2+ as well, and same chipset as Kavari :/
    I doubt it, as it's just a year from now, but I hope that's subject to change.

    @Kivada
    Thanks for the info

  5. #15
    Join Date
    Jun 2013
    Posts
    65

    Default

    Quote Originally Posted by UraniumDeer View Post
    According to that article, the pinout hinders use of quad-channel memory.
    That sucks, considering that Carrizo (according to this) will be using FM2+ as well, and same chipset as Kavari :/
    I doubt it, as it's just a year from now, but I hope that's subject to change.

    @Kivada
    Thanks for the info
    The slide I'm linking to, turns out to be fake.
    In my search on Carrizo socket, I've only found rumors so far.

  6. #16
    Join Date
    May 2010
    Posts
    89

    Default

    Well, how about sticking those 2400mhz ram on Haswell system and see how much performance can be gained

  7. #17
    Join Date
    Jul 2009
    Posts
    99

    Default

    Haswell benefits way less then Kaveri, especially with the Kingston RAM modules here in the test.

    Kaveri loves Dual Rate RAM (not to be confused with Dual Channel)
    For Haswell, and former AMD APUs, it doesn't really matter if its Dual or Single Rate.

  8. #18
    Join Date
    May 2010
    Posts
    89

    Default

    I would like to see how much scaling memory speed translate to haswell performance. I have seen some tests here in phoronix but they only tested to 1600mhz, and it shows performance scaling.
    Regarding dual rate ram, most ram now are dual rated (double sided ram).

  9. #19
    Join Date
    Jan 2014
    Posts
    14

    Default KHX24C11T3K2/8X - is authentic DUAL RANK ???

    The manufacturer's website does not contain anything.
    -
    http://www.kingston.com/datasheets/KHX24C11T3K2_8X.pdf ???

  10. #20
    Join Date
    Aug 2012
    Posts
    101

    Default

    AMD should put quad channel memory controller. That along DDR4 should be enough for an APU.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •