Hi,
I have played within the last few hours with the ATI closed source driver trying to make my card work (Gigabyte 9250 Pro card).
I'm using CentOS 4.4 with the latest official kernel: 2.6.9-42.0.3.EL. I installed the driver, let it compiled, checked that there are no errors, that the module loads, unloads - in short, everything looks OK.
Now the "fun" part.
I have my xorg.conf file. With the "radeon" driver and loads happily and runs nicely. When I try to change it to "fglrx" - it simply goes back to console to tell me that (EE) No devices detected and "no screens found".
I have used the aticontrol with dozens of parameters. Nada, didn't help.
My Machine: Pentium 4, 2GB RAM, CentOS 4.4 with all updates, kernel 2.6.9-42.0.3.EL (same as RHEL).
Here are 2 "attachments". The first one is my /etc/X11/xorg.conf file, the other - the /var/log/Xorg.0.log file.
Any suggestions are welcome.
Thanks,
Hetz
-----------------
file: xorg.conf
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 80.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9200PRO"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
------------
Xorg.0.log file (short version, I don't want to be kicked here )
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-42.0.3.ELsmp i686 [ELF]
Current Operating System: Linux witch.dyndns.org 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686
Build Date: 11 January 2007
Build Host:
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.9-42.0.3.EL (buildsvn@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 Fri Oct 6 05:59:54
CDT 2006 P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 28 04:56:42 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(skipping)
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5960) rev 1, Mem @ 0xe0000000/27, 0xff7f0000/16, I/O @ 0xc800/8, BIOS @ 0x
ff7c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5940) rev 1, Mem @ 0xd8000000/27, 0xff7e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(skipping)
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.33.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(skipping)
(II) ATI Radeon/FireGL: The following chipsets are supported:
ATI MOBILITY RADEON X600 (M24 3150), ATI FireMV 2400 (M24 3151),
ATI MOBILITY RADEON X300 (M22 (HP) 3152),
ATI MOBILITY FireGL V3200 (M24 GL 3154),
RADEON X600/X550 Series (RV380 3E50),
ATI FireGL V3200 (RV380 GL 3E54), RADEON 9500 (RADEON 9500 4144),
RADEON 9600TX (RADEON 9600TX 4146), ATI FireGL Z1 (FireGL Z1 4147),
RADEON 9800 SE (RADEON 9800 SE 4148), RADEON 9500 (RADEON 9500 4149),
ATI RADEON 9600 Series (RV350 4150),
ATI RADEON 9600 Series (RV350 SE 4151),
ATI RADEON 9600 Series (RV360 4152), ATI RADEON 9550 (RV350 LX 4153),
ATI FireGL T2 (FireGL T2 4154),
ATI RADEON 9600 Series (RV351 P 4155),
(the list goes on and on..)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.33.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.33g1
(II) ATI Proprietary Linux Driver Build Date: Jan 8 2007 23:27:08
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.33.2.1.2.3-driver-lnx-x86-x86_64-317595
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) No devices detected.
Fatal server error:
no screens found
----
If any info is needed, just tell me and I'll be happy to post it.
Thanks,
Hetz
I have played within the last few hours with the ATI closed source driver trying to make my card work (Gigabyte 9250 Pro card).
I'm using CentOS 4.4 with the latest official kernel: 2.6.9-42.0.3.EL. I installed the driver, let it compiled, checked that there are no errors, that the module loads, unloads - in short, everything looks OK.
Now the "fun" part.
I have my xorg.conf file. With the "radeon" driver and loads happily and runs nicely. When I try to change it to "fglrx" - it simply goes back to console to tell me that (EE) No devices detected and "no screens found".
I have used the aticontrol with dozens of parameters. Nada, didn't help.
My Machine: Pentium 4, 2GB RAM, CentOS 4.4 with all updates, kernel 2.6.9-42.0.3.EL (same as RHEL).
Here are 2 "attachments". The first one is my /etc/X11/xorg.conf file, the other - the /var/log/Xorg.0.log file.
Any suggestions are welcome.
Thanks,
Hetz
-----------------
file: xorg.conf
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 80.0
Option "dpms"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9200PRO"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
------------
Xorg.0.log file (short version, I don't want to be kicked here )
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-42.0.3.ELsmp i686 [ELF]
Current Operating System: Linux witch.dyndns.org 2.6.9-42.0.3.EL #1 Fri Oct 6 05:59:54 CDT 2006 i686
Build Date: 11 January 2007
Build Host:
Before reporting problems, check http://wiki.X.Org
to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.6.9-42.0.3.EL (buildsvn@build-i386) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 Fri Oct 6 05:59:54
CDT 2006 P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 28 04:56:42 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "single head configuration"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.2
X.Org Video Driver: 0.7
X.Org XInput driver : 0.4
X.Org Server Extension : 0.2
X.Org Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(--) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(skipping)
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5960) rev 1, Mem @ 0xe0000000/27, 0xff7f0000/16, I/O @ 0xc800/8, BIOS @ 0x
ff7c0000/17
(--) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5940) rev 1, Mem @ 0xd8000000/27, 0xff7e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(skipping)
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 6.8.0, module version = 8.33.6
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 0.7
(skipping)
(II) ATI Radeon/FireGL: The following chipsets are supported:
ATI MOBILITY RADEON X600 (M24 3150), ATI FireMV 2400 (M24 3151),
ATI MOBILITY RADEON X300 (M22 (HP) 3152),
ATI MOBILITY FireGL V3200 (M24 GL 3154),
RADEON X600/X550 Series (RV380 3E50),
ATI FireGL V3200 (RV380 GL 3E54), RADEON 9500 (RADEON 9500 4144),
RADEON 9600TX (RADEON 9600TX 4146), ATI FireGL Z1 (FireGL Z1 4147),
RADEON 9800 SE (RADEON 9800 SE 4148), RADEON 9500 (RADEON 9500 4149),
ATI RADEON 9600 Series (RV350 4150),
ATI RADEON 9600 Series (RV350 SE 4151),
ATI RADEON 9600 Series (RV360 4152), ATI RADEON 9550 (RV350 LX 4153),
ATI FireGL T2 (FireGL T2 4154),
ATI RADEON 9600 Series (RV351 P 4155),
(the list goes on and on..)
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.33.6
(II) ATI Proprietary Linux Driver Release Identifier: LGDr8.33g1
(II) ATI Proprietary Linux Driver Build Date: Jan 8 2007 23:27:08
(II) ATI Proprietary Linux Driver Build Information: autobuild-rel-r6-8.33.2.1.2.3-driver-lnx-x86-x86_64-317595
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
(EE) No devices detected.
Fatal server error:
no screens found
----
If any info is needed, just tell me and I'll be happy to post it.
Thanks,
Hetz
Comment