Hi everyone, I'm trying to setup dual monitor without Xinerama on my laptop (1400x1050 native res) and my LCD (1680x1050 native res). However, I can't seem to really get it working.
Right now I have two monitors going, with GNOME giving me an individual desktop on each and toolbars and whatnot, but my right monitor (LCD) has the resolution: 1440x900 (reported by xwininfo) and also, about a 30px or so black bar on the left hand side (the side that is beside my LCD monitor).
The LCD is connected to my laptops VGA port, and fglrx sees the right EDID info:
So, first I need to figure out how to set the proper resolution on the damn thing (XRandR shows a max of 1440x900 as well), and then second I need to figure out how to remove that ugly ass black bar, although I'm wondering if the two are related.
Here is my Xorg.conf file:
I'm on xorgserver 1.3, Fedora 8, fglrx 8.01.
Thanks!
Matt
Right now I have two monitors going, with GNOME giving me an individual desktop on each and toolbars and whatnot, but my right monitor (LCD) has the resolution: 1440x900 (reported by xwininfo) and also, about a 30px or so black bar on the left hand side (the side that is beside my LCD monitor).
The LCD is connected to my laptops VGA port, and fglrx sees the right EDID info:
Code:
(II) fglrx(0): Connected Display1: CRT on primary DAC [crt1] (II) fglrx(0): Display1 EDID data --------------------------- (II) fglrx(0): Manufacturer: VSC Model: e51d Serial#: 16843009 (II) fglrx(0): Year: 2006 Week: 8 (II) fglrx(0): EDID Version: 1.3 (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V (II) fglrx(0): Sync: Separate Composite SyncOnGreen (II) fglrx(0): Max H-Image Size [cm]: horiz.: 43 vert.: 27 (II) fglrx(0): Gamma: 2.20 (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display (II) fglrx(0): Default color space is primary color space (II) fglrx(0): First detailed timing is preferred mode (II) fglrx(0): redX: 0.640 redY: 0.352 greenX: 0.288 greenY: 0.628 (II) fglrx(0): blueX: 0.144 blueY: 0.076 whiteX: 0.313 whiteY: 0.329 (II) fglrx(0): Supported VESA Video Modes: (II) fglrx(0): 720x400@70Hz (II) fglrx(0): 640x480@60Hz (II) fglrx(0): 640x480@67Hz (II) fglrx(0): 640x480@72Hz (II) fglrx(0): 640x480@75Hz (II) fglrx(0): 800x600@56Hz (II) fglrx(0): 800x600@60Hz (II) fglrx(0): 800x600@72Hz (II) fglrx(0): 800x600@75Hz (II) fglrx(0): 832x624@75Hz (II) fglrx(0): 1024x768@60Hz (II) fglrx(0): 1024x768@70Hz (II) fglrx(0): 1024x768@75Hz (II) fglrx(0): 1280x1024@75Hz (II) fglrx(0): 1152x870@75Hz (II) fglrx(0): Manufacturer's mask: 0 (II) fglrx(0): Supported Future Video Modes: (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 75 vid: 4019 (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897 (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513 (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337 (II) fglrx(0): Supported additional Video Mode: (II) fglrx(0): clock: 146.2 MHz Image Size: 433 x 271 mm (II) fglrx(0): h_active: 1680 h_sync: 1784 h_sync_end 1960 h_blank_end 2240 h_border: 0 (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1089 v_border: 0 (II) fglrx(0): Serial No: Q6Y060803885 (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 82 kHz, PixClock max 210 MHz (II) fglrx(0): Monitor name: VX2025wm (II) fglrx(0): EDID (in hex): (II) fglrx(0): 00ffffffffffff005a631de501010101 (II) fglrx(0): 081001030e2b1b782ecfe5a35a49a024 (II) fglrx(0): 135054bfef80b30f81808140714f0101 (II) fglrx(0): 01010101010121399030621a274068b0 (II) fglrx(0): 3600b10f1100001c000000ff00513659 (II) fglrx(0): 3036303830333838350a000000fd0032 (II) fglrx(0): 4b1e5215000a202020202020000000fc (II) fglrx(0): 00565832303235776d0a20202020009d (II) fglrx(0): End of Display1 EDID data --------------------
Here is my Xorg.conf file:
Code:
GNU nano 2.0.6 File: /etc/X11/xorg.conf # Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "Screen0" LeftOf "Screen1" Screen 1 "Screen1" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Synaptics" "CorePointer" Option "Clone" "off" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us+inet" EndSection Section "InputDevice" Identifier "Synaptics" Driver "synaptics" Option "Device" "/dev/input/mice" Option "Protocol" "auto-dev" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1400x1050" HorizSync 31.5 - 65.5 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "LCD Panel 1680x1050" HorizSync 31.5 - 65.5 VertRefresh 56.0 - 65.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" EndSection Section "Device" Identifier "Videocard1" Driver "fglrx" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1680x1050" EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection
Thanks!
Matt