Results 1 to 10 of 10

Thread: Ubuntu 12.10 + Tahiti XT [Radeon HD 7970] Help!

  1. #1
    Join Date
    Feb 2013
    Posts
    4

    Default Ubuntu 12.10 + Tahiti XT [Radeon HD 7970] Help!

    Hey everyone,

    I just built a computer and have since installed Ubuntu Desktop 12.10 on for the operating system. My overall goal is to set up my system to perform GPU cracking utilizing oclHashcat-plus, which needs the AMD Catalyst 13.1 video driver version to work. I have two Tahiti XT [Radeon HD 7970] video cards and want to set things up as to use both for GPU cracking. However, I cannot get that AMD proprietary Catalyst driver installed correctly. Prior to each of the four things I have tried, I have reinstalled Ubuntu just to be sure that nothing was residually preventing the installation from something else I have tried. Also, in all instances I have done a apt-get update && apt-get upgrade prior to any of the things that I have tried below. I have attempted the following multiple times each:

    1. Downloaded the Catalyst 13.1 driver directly from AMD and installed via the ".run" file. I tried both the generic version as well as the targeted version for Ubuntu Quantal.
    2. Followed the directions three times at wiki.cchtml.com.
    - Including using the "Generic Config" command of aticonfig --initial -f --adapter=all
    - Including using the basic "Minimal Config" (Adjusted for my video cards of course).
    3. Attempted to install the Ubuntu-supplied fglrx/Catalyst driver.
    4. Attempted to install the driver by utilizing the "Ubuntu-X" PPA.

    I have not been successful in getting the driver installed. The only two outcomes that I have come to after trying everything stated about is that:
    1. After the login prompt, nothing loads after authentication. I still have the ability to "Right-Click" and manipulate settings, but nothing else in this scenario.
    2. When booting the system, I get the error saying "The system is running in low graphics mode." From here the only functionality I have is to drop into a login prompt with CONTROL+ALT+F2, but none of the other options displayed in that error window.

    I wouldn't say I am good with Linux, but I am decent. Honesetly at this point I am totally out of ideas. I have spent so much time trying to do this, but have so far had no luck. If someone could help me figure this out, it would be so greatly appreciated!!

    Please let me know if any additional information is needed! Below shows the video cards I have installed and output of lspci:


    root: ~# lshw -c video
    *-display
    description: VGA compatible controller
    product: Tahiti XT [Radeon HD 7970]
    vendor: Advanced Micro Devices [AMD] nee ATI
    physical id: 0
    bus info: pci@0000:01:00.0
    version: 00
    width: 64 bits
    clock: 33MHz
    capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
    configuration: driver=radeon latency=0
    resources: irq:59 memory:c0000000-cfffffff memory:efe00000-efe3ffff ioport:e000(size=256) memory:efe40000-efe5ffff
    *-display
    description: VGA compatible controller
    product: Tahiti XT [Radeon HD 7970]
    vendor: Advanced Micro Devices [AMD] nee ATI
    physical id: 0
    bus info: pci@0000:02:00.0
    version: 00
    width: 64 bits
    clock: 33MHz
    capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
    configuration: driver=radeon latency=0
    resources: irq:60 memory:b0000000-bfffffff memory:efd00000-efd3ffff ioport:d000(size=256) memory:efd40000-efd5ffff
    *-display
    description: VGA compatible controller
    product: Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller
    vendor: Intel Corporation
    physical id: 2
    bus info: pci@0000:00:02.0
    version: 09
    width: 64 bits
    clock: 33MHz
    capabilities: msi pm vga_controller bus_master cap_list rom
    configuration: driver=i915 latency=0
    resources: irq:56 memory:e7400000-e77fffff memory:a0000000-afffffff ioport:f000(size=64)

    root:~# lspci
    00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
    00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:01.1 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
    00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor Graphics Controller (rev 09)
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04)
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
    00:1c.5 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 (rev c4)
    00:1c.7 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 8 (rev c4)
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
    00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Tahiti XT [Radeon HD 7970]
    01:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Tahiti XT HDMI Audio [Radeon HD 7970 Series]
    02:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Tahiti XT [Radeon HD 7970]
    02:00.1 Audio device: Advanced Micro Devices [AMD] nee ATI Tahiti XT HDMI Audio [Radeon HD 7970 Series]
    34:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection
    35:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    36:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    36:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    36:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    36:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    36:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
    38:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)
    3b:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30)
    3c:02.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]
    3d:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)

  2. #2

    Default

    What't output of glxinfo after installing driver using this method? (Generation deb packages.) If you not able to run Terminal under Unity, you can run "DISPLAY=:0 glxinfo > glxinfo" under another VT (Ctrl+Alt+F2).

  3. #3
    Join Date
    Oct 2007
    Posts
    52

    Default

    Quote Originally Posted by ddxc View Post
    Hey everyone,

    I just built a computer and have since installed Ubuntu Desktop 12.10 on for the operating system. My overall goal is to set up my system to perform GPU cracking utilizing oclHashcat-plus, which needs the AMD Catalyst 13.1 video driver version to work. I have two Tahiti XT [Radeon HD 7970] video cards and want to set things up as to use both for GPU cracking. However, I cannot get that AMD proprietary Catalyst driver installed correctly. Prior to each of the four things I have tried, I have reinstalled Ubuntu just to be sure that nothing was residually preventing the installation from something else I have tried. Also, in all instances I have done a apt-get update && apt-get upgrade prior to any of the things that I have tried below. I have attempted the following multiple times each:

    1. Downloaded the Catalyst 13.1 driver directly from AMD and installed via the ".run" file. I tried both the generic version as well as the targeted version for Ubuntu Quantal.
    When installing using the Generic Catalyst13.1 driver, dident you get any errors?
    I had to install the linux generic headers, because apparently Ubuntu forgot to include them......

    Yust make sure to remove fglrx completely first
    Then Install the Linux Headers(3.5.0.23 in my case)
    Then Install the Generic driver and Hopefully it work for you

  4. #4
    Join Date
    Feb 2013
    Posts
    4

    Default

    Thanks for the responses!

    @RussianNeuroMancer -
    After generating and installing the deb packages I ran "amdconfig --initial -f --adapter=all" and rebooted. After the reboot, it came back in low graphics mode again and then here is the output from what you suggested.

    root: ~# glxinfo
    "Error: unable to open display"

    root: ~# fglrxinfo
    "Error: unable to open display (null)

    root: ~# echo $DISPLAY
    returns nothing.

    root: ~# DISPLAY=:0 glxinfo > glxinfo
    X Error of failed request: BadRequest (invalid request code or no such operation)
    Major opcode of failed request: 153 (GLX)
    Minor opcode of failed request: 19 (X_GLXQueryServerString)
    Serial number of failed request: 12
    Current serial number in output stream: 12

    @teroedni
    I did not receive any errors when I tried installing with the generic version of the driver. I did realize that I needed the generic headers. Also before I did anything to try to install the generic driver I ran "apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev*" to uninstall everything per the instructions at wiki.cchtml.com

    I should note that I have not been trying your suggestions simultaneously. Like I said in my initial post I have re-installed quite a few times just to make sure I am not screwing myself over with residual configuration. I know it is overkill, but takes out second guessing for me.

    Thanks again for you help! Let me know what you guys think I should try next!

  5. #5

    Default

    May you upload /var/log/Xorg.0.log somewhere? (pastebin for example)

  6. #6
    Join Date
    Feb 2013
    Posts
    4

    Default

    @RussianNeuroMancer

    I have uploaded my Xorg.0.log file to pastebin.

    http://pastebin.com/uaHPMDsb

    Thanks again!

  7. #7
    Join Date
    Feb 2013
    Posts
    66

    Default

    First install linux headers:
    Code:
    sudo apt-get install linux-headers-generic
    this package will automatically install latest linux headers.

    and then install fglrx:
    Code:
    sudo dpkg -i fglrx*.deb
    Last edited by leonmaxx; 02-18-2013 at 02:50 PM.

  8. #8

    Default

    Did you tried to disable Intel GPU in BIOS/UEFI?

  9. #9
    Join Date
    Feb 2013
    Posts
    4

    Default

    *Facepalm*

    @RussianNeuroMancer

    Dude thanks! That was it. I feel dumb, but thank you.

  10. #10

    Default

    Quote Originally Posted by ddxc View Post
    I feel dumb
    I too
    Intel GPU was mentoined in your first post but I didn't notice it.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •