Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Doom 3 Dante Engine Runs Faster With GLX Over EGL

  1. #1
    Join Date
    Jan 2007
    Posts
    14,793

    Default Doom 3 Dante Engine Runs Faster With GLX Over EGL

    Phoronix: Doom 3 Dante Engine Runs Faster With GLX Over EGL

    Oliver McFadden spoke on Wednesday during the X.Org Developers' Conference about Dante, his open-source project that's derived from id Software's released id Tech 4 code-base...

    http://www.phoronix.com/vr.php?view=MTE4ODM

  2. #2
    Join Date
    May 2012
    Posts
    811

    Default

    At around 14:50 is he saying the performance loss is because of a vblank issue and that they should fixed it?

    Because of his pronunciation I didn't understand all he said.
    Last edited by mark45; 09-20-2012 at 05:56 AM.

  3. #3

    Default gDEBugger supports nVidia

    AMD's gDEBugger supports nVidia cards pretty well. There's no support for OpenCL kernel debugging, but everything else works fine.

  4. #4

    Default Doom 3 binary.

    With a low-latency kernel, I ran Doom 3 binary, extremely smooth at 72fps. Even with SSAA turned on etc. This was a few years ago, with 2x2.5ghz cpu, and an nvidia gtx280 card, I think.

    And that is quite a difference from standard ubuntu kernels, where people play with choppy frames. I can`t believe they bother with that, or that their kernel engineers don`t try to provide the best experience.

    Peace Be With You.

  5. #5
    Join Date
    Aug 2012
    Posts
    457

    Default

    Quote Originally Posted by Paradox Uncreated View Post
    With a low-latency kernel, I ran Doom 3 binary, extremely smooth at 72fps. Even with SSAA turned on etc. This was a few years ago, with 2x2.5ghz cpu, and an nvidia gtx280 card, I think.

    And that is quite a difference from standard ubuntu kernels, where people play with choppy frames. I can`t believe they bother with that, or that their kernel engineers don`t try to provide the best experience.

    Peace Be With You.

    Every single post Michael has put up on low-latency kernals have shown that its equal or worse than the standard kernal.

  6. #6

    Default

    In practise framerate is lower, and suffers from jitter. If you ever tried the standard ubuntu kernel, vs a well-configured low-latency kernel (and I don`t know if ubuntu low-latency kernels are that, I compile my own), you will notice the difference in smoothness. Standard ubuntu kernel, even shows larger jitter (dropped frames) on 30fps video! As I have said earlier, synthetic non-vsynced benchmarks, say nothing about user experience. Instead ofcourse vsynced benchmarks, at 72hz refresh rate (which also is optimal, for reasons descriped earlier), giving some idea of scene complexity, sustained at 72fps, and the jitter associated with it, would be much more useful.

    Peace Be With You.

  7. #7

    Default Uwaysis Low Latency Kernel

    You know what, I can boot into my linuxbox, and do a low-latency config on the latest kernel. I like to follow the developments on that anyway, and see if I can make a .deb of it, and everyone can install it, and compare.

    Low os-jitter operating system, is a special interest of mine. I will do a post on http://www.paradoxuncreated.com for those interested.

    Peace Be With You.

  8. #8
    Join Date
    Apr 2011
    Location
    Dhaka,Bangladesh
    Posts
    105

    Default How to compile dante?

    I tried to run the dante engine several times but failed all the time. I am using AMD FGLRX 12.6 legacy driver in KUbuntu 12.04. dhewm3 compile and runs fine. But as EGL is not present in fglrx, I could only compile it with OPENGL target. But even then it fails to run all the time. Did anybody got success running it on fglrx?

  9. #9
    Join Date
    Nov 2010
    Posts
    90

    Default

    Quote Originally Posted by Tiger_Coder View Post
    I tried to run the dante engine several times but failed all the time. I am using AMD FGLRX 12.6 legacy driver in KUbuntu 12.04. dhewm3 compile and runs fine. But as EGL is not present in fglrx, I could only compile it with OPENGL target. But even then it fails to run all the time. Did anybody got success running it on fglrx?
    Hi

    I'll second this. dhewm3 is doddle to build. I've tested it on Kubuntu and Gentoo on my laptop. However I just can't get my head around building Dante - let alone actually troubleshooting it!!
    Perhaps I'll just get in touch with the developer on his blog...

    I'm also using the beta Legacy Catalyst 12.6 driver (well on Gentoo - thinks it's 12.4 on Kubuntu 12.04) - but that's probably not much of an issue if I can't even figure out how to compile the Source!!

    I've still to play through ROE - and would be nice to try it on an "improved" version of the ID Tech engine!!

    Bob

  10. #10
    Join Date
    Oct 2007
    Posts
    321

    Default

    Quote Originally Posted by stativ View Post
    AMD's gDEBugger supports nVidia cards pretty well. There's no support for OpenCL kernel debugging, but everything else works fine.
    Interesting... Care to describe your system configuration? ( The easy way is to use the command "phoronix-test-suite system-info" )

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •