Hello,
I've got problems with my AMD (ATI) Radeon HD 5670 in Ubuntu 12.04 LTS (Precise Pangolin).
I had 2GB of RAM (DDR2, PC6400, 800MHz), I added another 2GB so now I have 4GB (2x2GB) and I'm not able to use fglrx drivers.
I've applied patch for new kernel http://phoronix.com/forums/showthrea...86-32-bit-arch and installed latest Catalyst 12.4 drivers succesfully without any errors according to WIKI pages http://wiki.cchtml.com/index.php/Ubu...TI.27s_site.29 but unfortunately after system restart I get black or violet screen and I'm not even able to switch to other virtual console with Ctrl+Alt+F1...F6. When I remove 2GB (only 2GB left) system starts normally and everything works fine.
It's not RAM issue, because I've got Windows 7 installed as well and it works fine, 4GB of memory are visible in the system. Besides when I installed Backtrack 5 which is based on Ubuntu 10.04 LTS, 12.4 catalyst drivers were working correctly with 4GB RAM inserted.
All installations were made on fresh and updated system. After I install drivers and execute
fglrxinfo output and xorg.conf (before this command there was no /etc/X11/xorg.conf) are as follows (right after installation and before system restart):
I moved xorg.conf file to see if it causes problems, but after
the problem was still present- black or violet screen.
After xorg.conf restoration
I tried to tune it according to wiki
but without success...
Blacklisting radeon modules also did not help...
Ofcourse when I remove 2GB RAM and leave 2GB- system boots normally and fglrxinfo looks very good:
Problem is present only when 4GB are inserted... I borrowed 1GB of RAM and tested configuration with 3GB and it was working fine!
Used kernel supports 4GB of RAM (visible after free -m when fglrx drivers are not installed)
The same situation is with fglrx drivers from repos...
What kind of logs can I check? Can anyone help me with this issue?
Looking forward,
Przemek.
P.S. I tried also 12.6 Beta version of catalyst drivers, mentioned patch was not need to successfully generate packages, but after installation situation is still the same- black or violet screen when 4GB are inserted...
I've got problems with my AMD (ATI) Radeon HD 5670 in Ubuntu 12.04 LTS (Precise Pangolin).
I had 2GB of RAM (DDR2, PC6400, 800MHz), I added another 2GB so now I have 4GB (2x2GB) and I'm not able to use fglrx drivers.
I've applied patch for new kernel http://phoronix.com/forums/showthrea...86-32-bit-arch and installed latest Catalyst 12.4 drivers succesfully without any errors according to WIKI pages http://wiki.cchtml.com/index.php/Ubu...TI.27s_site.29 but unfortunately after system restart I get black or violet screen and I'm not even able to switch to other virtual console with Ctrl+Alt+F1...F6. When I remove 2GB (only 2GB left) system starts normally and everything works fine.
It's not RAM issue, because I've got Windows 7 installed as well and it works fine, 4GB of memory are visible in the system. Besides when I installed Backtrack 5 which is based on Ubuntu 10.04 LTS, 12.4 catalyst drivers were working correctly with 4GB RAM inserted.
All installations were made on fresh and updated system. After I install drivers and execute
Code:
sudo amdconfig --initial -f
Code:
[B]przemek@pc:~/catalyst12.4$ sudo amdconfig --initial -f[/B] Uninitialised file found, configuring. Using /etc/X11/xorg.conf Saving back-up to /etc/X11/xorg.conf.original-1 [B]przemek@pc:~/catalyst12.4$ cat /etc/X11/xorg.conf[/B] Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection [B]przemek@pc:~/catalyst12.4$ fglrxinfo[/B] display: :0 screen: 0 OpenGL vendor string: VMware, Inc. OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 0x300) OpenGL version string: 1.4 (2.1 Mesa 8.0.2) przemek@pc:~/catalyst12.4$
Code:
sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf.disabled
After xorg.conf restoration
Code:
sudo mv /etc/X11/xorg.conf.disabled /etc/X11/xorg.conf
Code:
sudo amdconfig --tls=0 sudo amdconfig --acpi-services=off
Blacklisting radeon modules also did not help...
Code:
echo "blacklist radeon" | sudo tee -a /etc/modprobe.d/blacklist-radeon.conf sudo depmod -a
Ofcourse when I remove 2GB RAM and leave 2GB- system boots normally and fglrxinfo looks very good:
Code:
[B]przemek@pc:~$ fglrxinfo[/B] display: :0 screen: 0 OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Radeon HD 5670 OpenGL version string: 4.2.11631 Compatibility Profile Context [B]przemek@pc:~$ fgl_glxgears[/B] Using GLX_SGIX_pbuffer 3178 frames in 5.0 seconds = 635.600 FPS 4172 frames in 5.0 seconds = 834.400 FPS 4163 frames in 5.0 seconds = 832.600 FPS 4153 frames in 5.0 seconds = 830.600 FPS 4165 frames in 5.0 seconds = 833.000 FPS 4152 frames in 5.0 seconds = 830.400 FPS 4141 frames in 5.0 seconds = 828.200 FPS 4160 frames in 5.0 seconds = 832.000 FPS 4162 frames in 5.0 seconds = 832.400 FPS ^C przemek@pc:~$
Used kernel supports 4GB of RAM (visible after free -m when fglrx drivers are not installed)
Code:
przemek@pc:~$ uname -r 3.2.0-25-generic-[B]pae[/B] przemek@pc:~$
What kind of logs can I check? Can anyone help me with this issue?
Looking forward,
Przemek.
P.S. I tried also 12.6 Beta version of catalyst drivers, mentioned patch was not need to successfully generate packages, but after installation situation is still the same- black or violet screen when 4GB are inserted...
Comment