Announcement

Collapse
No announcement yet.

CRTC virtual pixel clock in displayport mode, and atombios SetPixelClock

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • CRTC virtual pixel clock in displayport mode, and atombios SetPixelClock

    Hi,
    In displayport mode, the DCPLL defaults to 600MHz for DCE4 and 540MHz for DCE5.

    When programming the video mode for a crtc, SetPixelClock command table is used.
    What are the parameters really used for this command table to program the crtc virtual pixel clock (as stated in radeon_atom_pick_pll)?

  • #2
    I did a bit of testing and, with a zeroed param struct, only the pixel clock field, the crtc id field and the pll_id field seem to be relevant for crtc virtual pixel clock programming.

    Am I right or the PLL parameters/transmitter id must be used?

    Comment

    Working...
    X