Hi, I bought new raphics card (ATI HD 6950) I installed it and all went well, but now when I run glx gears I get:
I was getting about 8000 on my old ati hd 3870... also CPU is being heavily used, shouldnt the GPU process it?
+ fgl_glxgears
here is my Xorg:
I am not too good at configuring it, all help welcomed .
also tried this one
glxinfo | grep rendering:
Is theese fps normal? I tried playing Skyrim in wine but on lowest it had realy low fps (Its using lots of cpu but not all, and 0.5GB og RAM is free)
I dont think system is fully using GPU because graphical programs (opengl-glxgears) are using loads of CPU... any ideas?
I tried cataclyst 11.11 and 11.12-r1, I am using gentoo.
Thanx for any help
lspci -v -s 01:00.0
Code:
34169 frames in 5.0 seconds = 6833.714 FPS 34427 frames in 5.0 seconds = 6885.330 FPS 34324 frames in 5.0 seconds = 6864.661 FPS
+ fgl_glxgears
Code:
Using GLX_SGIX_pbuffer 14665 frames in 5.0 seconds = 2933.000 FPS 15379 frames in 5.0 seconds = 3075.800 FPS
Code:
#Section "InputDevice" # Identifier "Mouse0" # Driver "mouse" # Option "Protocol" "auto" # Option "Device" "/dev/input/mice" # Option "ZAxisMapping" "4 5 6 7" #EndSection #Section "Monitor" # Identifier "Monitor0" # VendorName "SAM" # ModelName "SAMSUNG" # HorizSync 26.0 - 76.0 # VertRefresh 23.0 - 61.0 #EndSection Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 1920 0 Screen "aticonfig-Screen[0]-1" 0 0 InputDevice "Evdev Mouse" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/misc/" FontPath "/usr/share/fonts/TTF/" FontPath "/usr/share/fonts/OTF/" FontPath "/usr/share/fonts/Type1/" FontPath "/usr/share/fonts/100dpi/" FontPath "/usr/share/fonts/75dpi/" EndSection Section "Module" Load "glx" Load "dbe" Load "extmod" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "Name" "Corsair Corsair Vengeance M90 Mouse" Option "evBits" "+1-2" Option "keyBits" "~272-287" Option "relBits" "~0-2 ~6 ~8" Option "Pass" "3" Option "CorePointer" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "fglrx" Option "UseFastTLS" "2" Option "Monitor-DFP1" "0-DFP1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "UseFastTLS" "2" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-1" Driver "fglrx" Option "UseFastTLS" "2" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Card0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]-1" Device "aticonfig-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection
also tried this one
Code:
Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "aticonfig-Screen[0]-0" 0 0 InputDevice "Evdev Mouse" "CorePointer" EndSection Section "Module" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:1:0:0" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "InputDevice" Identifier "Evdev Mouse" Driver "evdev" Option "Name" "Corsair Corsair Vengeance M90 Mouse" Option "evBits" "+1-2" Option "keyBits" "~272-287" Option "relBits" "~0-2 ~6 ~8" Option "Pass" "3" Option "CorePointer" EndSection
Code:
direct rendering: Yes
I dont think system is fully using GPU because graphical programs (opengl-glxgears) are using loads of CPU... any ideas?
I tried cataclyst 11.11 and 11.12-r1, I am using gentoo.
Thanx for any help
lspci -v -s 01:00.0
Code:
01:00.0 VGA compatible controller: ATI Technologies Inc Device 6719 (prog-if 00 [VGA controller]) Subsystem: PC Partner Limited Device 186b Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at e0000000 (64-bit, prefetchable) [size=256M] Memory at f5000000 (64-bit, non-prefetchable) [size=128K] I/O ports at b000 [size=256] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: fglrx_pci Kernel modules: fglrx
Comment