If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I'd rather not. It's not really Open Source. Not even close. It's Source Available- if you use any knowledge coming away from a reading of their codebase, you might taint another project. Now, if I had to USE QNX as opposed to ecOS or RTEMS, it might be a little different story. As it stands, I only have to use VXWorks and very probably only for a short time longer before the client switches over to embedded Linux and takes advantage of all the muscle that an embedded X86 board brings to the table for what they're needing. They don't need real-time in the traditional sense, they just need good worst-case timings and hardened, embedded operation in an OS. Linux does this in spades with the current crop of PIII/PIV class motherboards that are industrial/mil-spec rated.
I'd rather not. It's not really Open Source. Not even close. It's Source Available- if you use any knowledge coming away from a reading of their codebase, you might taint another project.
Yes, my mistake, Sorry.
Originally posted by Svartalf
Now, if I had to USE QNX as opposed to ecOS or RTEMS, it might be a little different story. As it stands, I only have to use VXWorks and very probably only for a short time longer before the client switches over to embedded Linux and takes advantage of all the muscle that an embedded X86 board brings to the table for what they're needing. They don't need real-time in the traditional sense, they just need good worst-case timings and hardened, embedded operation in an OS. Linux does this in spades with the current crop of PIII/PIV class motherboards that are industrial/mil-spec rated.
Well, I *AM* a QNX user and driver developer (SH-4), so I welcome this step since QNX's Documentation sucks big time (well so does every doc I've ever read).
In my experience Linux is far more "efficient" when
it comes to moving data around; QNX is snappier and
drivers are far easier to debug (can't beat killing a
driver by issuing a "kill -15" and attaching GDB to it).
WNX sounds cool, I seen a demo where QNX and a basic web browser can fit on a single floppy. Neat stuff though. Is QNX using a license something like Shared Source?
Comment