I am running FC6 (2.6.20) with my ATI X1600, and fglrx 8.37.6. I have an LCD display on one head, and a projector on the other. No matter what I do, I cannot get the outputs to clone. My xorg.conf is below. Any ideas?
As a clue, I have one line commented out in the ServerLayout section. With this line commented out, I get one BIG display that scrolls left-right onscreen. If I uncomment this line, I get one screen per display, and the cursor moves between them (split desktop).
How can I get a clone?
Thanks,
Michelle
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "aticonfig-Screen[0]" 0 0
# Screen 1 "aticonfig-Screen[1]" RightOf "aticonfig-Screen[0]"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe" # Double buffering
Load "vnc"
Load "extmod"
# Next line is for ATI proprietary driver
Load "glx"
# Next line is for open source ati driver
# Load "dri"
EndSection
# Test - do I need this?
Section "DRI"
Group 0
Mode 0666
EndSection
# ATI does not support composite, so disable
Section "Extensions"
# Option "Composite" "disable"
EndSection
Section "ServerFlags"
# Next line is to prevent error AIGLX error: dlsym for __driCreateNewScreen_20050727 failed
Option "AIGLX" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
Option "VendorName" "Sony"
Option "ModelName" "VPL-HS51"
Option "DPMS" "true"
Modeline "1280x720_75" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
Modeline "1280x720_60" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
Option "VendorName" "SilverstoneTek"
Option "ModelName" "Internal Monitor"
Option "DPMS" "true"
Modeline "1280x720_75" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
Modeline "1280x720_60" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BusID "PCI:6:0:0"
Option "OverlayOnCRTC2" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "DesktopSetup" "horizontal"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "off"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
BusID "PCI:6:0:0"
Screen 1
Option "OverlayOnCRTC2" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "DesktopSetup" "horizontal"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "off"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x720_75" "1280x720_60"
EndSubSection
Option "PasswordFile" "/home/mythtv/.vnc/passwd"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x720_75" "1280x720_60"
EndSubSection
Option "PasswordFile" "/home/mythtv/.vnc/passwd"
EndSection
As a clue, I have one line commented out in the ServerLayout section. With this line commented out, I get one BIG display that scrolls left-right onscreen. If I uncomment this line, I get one screen per display, and the cursor moves between them (split desktop).
How can I get a clone?
Thanks,
Michelle
Section "ServerLayout"
Identifier "Multihead layout"
Screen 0 "aticonfig-Screen[0]" 0 0
# Screen 1 "aticonfig-Screen[1]" RightOf "aticonfig-Screen[0]"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "off"
Option "Clone" "on"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
EndSection
Section "Module"
Load "dbe" # Double buffering
Load "vnc"
Load "extmod"
# Next line is for ATI proprietary driver
Load "glx"
# Next line is for open source ati driver
# Load "dri"
EndSection
# Test - do I need this?
Section "DRI"
Group 0
Mode 0666
EndSection
# ATI does not support composite, so disable
Section "Extensions"
# Option "Composite" "disable"
EndSection
Section "ServerFlags"
# Next line is to prevent error AIGLX error: dlsym for __driCreateNewScreen_20050727 failed
Option "AIGLX" "off"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
Option "VendorName" "Sony"
Option "ModelName" "VPL-HS51"
Option "DPMS" "true"
Modeline "1280x720_75" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
Modeline "1280x720_60" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[1]"
# Option "VendorName" "ATI Proprietary Driver"
# Option "ModelName" "Generic Autodetecting Monitor"
Option "VendorName" "SilverstoneTek"
Option "ModelName" "Internal Monitor"
Option "DPMS" "true"
Modeline "1280x720_75" 74.48 1280 1336 1472 1664 720 721 724 746 +hsync
Modeline "1280x720_60" 60.46 1280 1328 1456 1632 720 721 724 741 +hsync
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
BusID "PCI:6:0:0"
Option "OverlayOnCRTC2" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "DesktopSetup" "horizontal"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "off"
EndSection
Section "Device"
Identifier "aticonfig-Device[1]"
Driver "fglrx"
BusID "PCI:6:0:0"
Screen 1
Option "OverlayOnCRTC2" "1"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "DesktopSetup" "horizontal"
Option "TexturedVideo" "on"
Option "TexturedVideoSync" "off"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x720_75" "1280x720_60"
EndSubSection
Option "PasswordFile" "/home/mythtv/.vnc/passwd"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[1]"
Device "aticonfig-Device[1]"
Monitor "aticonfig-Monitor[1]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x720_75" "1280x720_60"
EndSubSection
Option "PasswordFile" "/home/mythtv/.vnc/passwd"
EndSection
Comment