Hello,
I am trying to configure the xorg.conf so I can force a resolution when the HTPC server is booted without any output connected to it (TV off).
I am trying to force the TV (HDMI1) to be 1280x720 but I get this error "(WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer"
Kernel: 2.6.35-22
Linux Intel drivers: 2.12.0
Here is my Xorg.conf:
Here is my Xorg.log:
Through VNC, xrandr confirms that my resolution is 1024x768:
Any idea? I have googled, search on intel linux website and forums but didn't find the missing entry in my xorg.conf.
Thanks
XabiX
I am trying to configure the xorg.conf so I can force a resolution when the HTPC server is booted without any output connected to it (TV off).
I am trying to force the TV (HDMI1) to be 1280x720 but I get this error "(WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer"
Kernel: 2.6.35-22
Linux Intel drivers: 2.12.0
Here is my Xorg.conf:
Section "ServerLayout"
Identifier "Default Layout"
Screen "TV"
EndSection
Section "Device"
Identifier "Intel HD Graphics"
Driver "intel"
BusID "PCI:0:2:0"
Option "monitor-VGA1" "none"
Option "monitor-DP1" "none"
Option "monitor-HDMI1" "none"
Option "monitor-HDMI2" "TSB-TV"
Option "ModeDebug" "true"
EndSection
Section "Monitor"
Identifier "TSB-TV"
VendorName "Toshiba"
ModelName "42WLG66"
HorizSync 15.0 - 46.0
VertRefresh 49.0 - 122.0
# Modeline "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
# Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
Modeline "1280x720_50.0" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
# Option "PreferredMode" "1280x720_50"
EndSection
Section "Monitor"
Identifier "none"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "TV"
Device "Intel HD Graphics"
Monitor "TSB-TV"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x720_50.0"
EndSubSection
EndSection
Identifier "Default Layout"
Screen "TV"
EndSection
Section "Device"
Identifier "Intel HD Graphics"
Driver "intel"
BusID "PCI:0:2:0"
Option "monitor-VGA1" "none"
Option "monitor-DP1" "none"
Option "monitor-HDMI1" "none"
Option "monitor-HDMI2" "TSB-TV"
Option "ModeDebug" "true"
EndSection
Section "Monitor"
Identifier "TSB-TV"
VendorName "Toshiba"
ModelName "42WLG66"
HorizSync 15.0 - 46.0
VertRefresh 49.0 - 122.0
# Modeline "1920x1080i" 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync
# Modeline "1368x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
Modeline "1280x720_50.0" 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync
# Option "PreferredMode" "1280x720_50"
EndSection
Section "Monitor"
Identifier "none"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "TV"
Device "Intel HD Graphics"
Monitor "TSB-TV"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1280x720_50.0"
EndSubSection
EndSection
Code:
xabix@xabix-desktop:~$ cat /var/log/Xorg.0.log [ 35.878] X.Org X Server 1.9.0 Release Date: 2010-08-20 [ 35.878] X Protocol Version 11, Revision 0 [ 35.878] Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu [ 35.878] Current Operating System: Linux xabix-desktop 2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:32:27 UTC 2010 x86_64 [ 35.878] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-22-generic root=UUID=0785fb3c-6674-41e4-a48e-73c3a8c7ed25 ro vga=791 quiet splash [ 35.878] Build Date: 16 September 2010 06:18:41PM [ 35.878] xorg-server 2:1.9.0-0ubuntu7 (For technical support please see http://www.ubuntu.com/support) [ 35.878] Current version of pixman: 0.18.4 [ 35.878] Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. [ 35.878] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 35.878] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 11 22:02:21 2010 [ 35.879] (==) Using config file: "/etc/X11/xorg.conf" [ 35.879] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 35.879] (==) ServerLayout "Default Layout" [ 35.879] (**) |-->Screen "TV" (0) [ 35.879] (**) | |-->Monitor "TSB-TV" [ 35.879] (**) | |-->Device "Intel HD Graphics" [ 35.879] (==) Automatically adding devices [ 35.879] (==) Automatically enabling devices [ 35.880] (==) FontPath set to: /usr/share/fonts/X11/misc, /usr/share/fonts/X11/cyrillic, /usr/share/fonts/X11/100dpi/:unscaled, /usr/share/fonts/X11/75dpi/:unscaled, /usr/share/fonts/X11/Type1, /usr/share/fonts/X11/100dpi, /usr/share/fonts/X11/75dpi, /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType, built-ins [ 35.880] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 35.880] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 35.880] (II) Loader magic: 0x7d0200 [ 35.880] (II) Module ABI versions: [ 35.880] X.Org ANSI C Emulation: 0.4 [ 35.880] X.Org Video Driver: 8.0 [ 35.880] X.Org XInput driver : 11.0 [ 35.880] X.Org Server Extension : 4.0 [ 35.880] (--) PCI:*(0:0:2:0) 8086:0042:1458:d000 rev 18, Mem @ 0xfb400000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/8 [ 35.881] (--) PCI: (0:4:0:0) 14f1:8852:d470:9022 rev 2, Mem @ 0xfb800000/2097152 [ 35.881] (II) Open ACPI successful (/var/run/acpid.socket) [ 35.881] (II) LoadModule: "extmod" [ 35.881] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so [ 35.881] (II) Module extmod: vendor="X.Org Foundation" [ 35.882] compiled for 1.9.0, module version = 1.0.0 [ 35.882] Module class: X.Org Server Extension [ 35.882] ABI class: X.Org Server Extension, version 4.0 [ 35.882] (II) Loading extension MIT-SCREEN-SAVER [ 35.882] (II) Loading extension XFree86-VidModeExtension [ 35.882] (II) Loading extension XFree86-DGA [ 35.882] (II) Loading extension DPMS [ 35.882] (II) Loading extension XVideo [ 35.882] (II) Loading extension XVideo-MotionCompensation [ 35.882] (II) Loading extension X-Resource [ 35.882] (II) LoadModule: "dbe" [ 35.882] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so [ 35.882] (II) Module dbe: vendor="X.Org Foundation" [ 35.882] compiled for 1.9.0, module version = 1.0.0 [ 35.882] Module class: X.Org Server Extension [ 35.882] ABI class: X.Org Server Extension, version 4.0 [ 35.882] (II) Loading extension DOUBLE-BUFFER [ 35.882] (II) LoadModule: "glx" [ 35.882] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so [ 35.882] (II) Module glx: vendor="X.Org Foundation" [ 35.882] compiled for 1.9.0, module version = 1.0.0 [ 35.882] ABI class: X.Org Server Extension, version 4.0 [ 35.882] (==) AIGLX enabled [ 35.882] (II) Loading extension GLX [ 35.882] (II) LoadModule: "record" [ 35.882] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so [ 35.882] (II) Module record: vendor="X.Org Foundation" [ 35.882] compiled for 1.9.0, module version = 1.13.0 [ 35.882] Module class: X.Org Server Extension [ 35.882] ABI class: X.Org Server Extension, version 4.0 [ 35.882] (II) Loading extension RECORD [ 35.882] (II) LoadModule: "dri" [ 35.883] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so [ 35.883] (II) Module dri: vendor="X.Org Foundation" [ 35.883] compiled for 1.9.0, module version = 1.0.0 [ 35.883] ABI class: X.Org Server Extension, version 4.0 [ 35.883] (II) Loading extension XFree86-DRI [ 35.883] (II) LoadModule: "dri2" [ 35.883] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so [ 35.883] (II) Module dri2: vendor="X.Org Foundation" [ 35.883] compiled for 1.9.0, module version = 1.2.0 [ 35.883] ABI class: X.Org Server Extension, version 4.0 [ 35.883] (II) Loading extension DRI2 [ 35.883] (II) LoadModule: "intel" [ 35.883] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so [ 35.883] (II) Module intel: vendor="X.Org Foundation" [ 35.883] compiled for 1.9.0, module version = 2.12.0 [ 35.883] Module class: X.Org Video Driver [ 35.883] ABI class: X.Org Video Driver, version 8.0 [ 35.883] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge [ 35.884] (++) using VT number 7 [ 35.886] drmOpenDevice: node name is /dev/dri/card0 [ 35.886] drmOpenDevice: open result is 9, (OK) [ 35.888] drmOpenByBusid: Searching for BusID pci:0000:00:02.0 [ 35.888] drmOpenDevice: node name is /dev/dri/card0 [ 35.888] drmOpenDevice: open result is 9, (OK) [ 35.888] drmOpenByBusid: drmOpenMinor returns 9 [ 35.888] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0 [ 35.888] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 35.888] (==) intel(0): RGB weight 888 [ 35.888] (==) intel(0): Default visual is TrueColor [ 35.888] (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale [ 35.888] (--) intel(0): Chipset: "Clarkdale" [ 35.888] (==) intel(0): video overlay key set to 0x101fe [ 35.905] (II) intel(0): Output VGA1 using monitor section none [ 35.905] (**) intel(0): Option "Ignore" "true" [ 35.915] (II) intel(0): Output HDMI1 using monitor section none [ 35.920] (II) intel(0): Output DP1 using monitor section none [ 35.929] (II) intel(0): Output HDMI2 using monitor section TSB-TV [ 35.938] (II) intel(0): Output HDMI3 has no monitor section [ 35.943] (II) intel(0): Output DP2 has no monitor section [ 35.948] (II) intel(0): Output DP3 has no monitor section [ 35.948] (**) intel(0): Option "ModeDebug" "true" [ 35.957] (II) intel(0): EDID for output HDMI2 [ 35.966] (II) intel(0): EDID for output HDMI3 [ 35.971] (II) intel(0): EDID for output DP2 [ 35.977] (II) intel(0): EDID for output DP3 [ 35.977] (II) intel(0): Output HDMI2 disconnected [ 35.977] (II) intel(0): Output HDMI3 disconnected [ 35.977] (II) intel(0): Output DP2 disconnected [ 35.977] (II) intel(0): Output DP3 disconnected [ 35.977] (WW) intel(0): No outputs definitely connected, trying again... [ 35.977] (II) intel(0): Output HDMI2 disconnected [ 35.977] (II) intel(0): Output HDMI3 disconnected [ 35.977] (II) intel(0): Output DP2 disconnected [ 35.977] (II) intel(0): Output DP3 disconnected [ 35.977] (WW) intel(0): Unable to find connected outputs - setting 1024x768 initial framebuffer [ 35.977] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated. [ 35.977] (II) intel(0): Kernel page flipping support detected, but forcibly disabled. [ 35.977] (==) intel(0): DPI set to (96, 96) [ 35.977] (II) Loading sub module "fb" [ 35.977] (II) LoadModule: "fb" [ 35.977] (II) Loading /usr/lib/xorg/modules/libfb.so [ 35.977] (II) Module fb: vendor="X.Org Foundation" [ 35.977] compiled for 1.9.0, module version = 1.0.0 [ 35.977] ABI class: X.Org ANSI C Emulation, version 0.4 [ 35.977] (==) Depth 24 pixmap format is 32 bpp [ 35.977] (II) intel(0): [DRI2] Setup complete [ 35.977] (II) intel(0): [DRI2] DRI driver: i965 [ 35.977] (**) intel(0): Tiling enabled [ 35.977] (**) intel(0): SwapBuffers wait enabled [ 35.977] (==) intel(0): VideoRam: 262144 KB [ 35.977] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled [ 35.982] (II) UXA(0): Driver registered support for the following operations: [ 35.982] (II) solid [ 35.982] (II) copy [ 35.982] (II) composite (RENDER acceleration) [ 35.982] (II) put_image [ 35.982] (II) get_image [ 35.982] (==) intel(0): Backing store disabled [ 35.982] (==) intel(0): Silken mouse enabled [ 35.982] (II) intel(0): Initializing HW Cursor [ 35.982] (EE) intel(0): Couldn't create pixmap for fbcon [ 35.982] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 35.983] (==) intel(0): DPMS enabled [ 35.983] (==) intel(0): Intel XvMC decoder enabled [ 35.983] (II) intel(0): Set up textured video [ 35.983] (II) intel(0): [XvMC] xvmc_vld driver initialized. [ 35.983] (II) intel(0): direct rendering: DRI2 Enabled [ 35.983] (--) RandR disabled [ 35.983] (II) Initializing built-in extension Generic Event Extension [ 35.983] (II) Initializing built-in extension SHAPE [ 35.983] (II) Initializing built-in extension MIT-SHM [ 35.983] (II) Initializing built-in extension XInputExtension [ 35.983] (II) Initializing built-in extension XTEST [ 35.983] (II) Initializing built-in extension BIG-REQUESTS [ 35.983] (II) Initializing built-in extension SYNC [ 35.983] (II) Initializing built-in extension XKEYBOARD [ 35.983] (II) Initializing built-in extension XC-MISC [ 35.983] (II) Initializing built-in extension SECURITY [ 35.983] (II) Initializing built-in extension XINERAMA [ 35.983] (II) Initializing built-in extension XFIXES [ 35.983] (II) Initializing built-in extension RENDER [ 35.983] (II) Initializing built-in extension RANDR [ 35.983] (II) Initializing built-in extension COMPOSITE [ 35.983] (II) Initializing built-in extension DAMAGE [ 35.983] (II) Initializing built-in extension GESTURE [ 35.989] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 35.989] (II) AIGLX: enabled GLX_INTEL_swap_event [ 35.989] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control [ 35.989] (II) AIGLX: enabled GLX_SGI_make_current_read [ 35.989] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 35.989] (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so [ 35.989] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 36.003] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm [ 36.008] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 36.008] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 36.008] (II) LoadModule: "evdev" [ 36.008] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 36.009] (II) Module evdev: vendor="X.Org Foundation" [ 36.009] compiled for 1.9.0, module version = 2.3.2 [ 36.009] Module class: X.Org XInput Driver [ 36.009] ABI class: X.Org XInput driver, version 11.0 [ 36.009] (**) Power Button: always reports core events [ 36.009] (**) Power Button: Device: "/dev/input/event1" [ 36.030] (II) Power Button: Found keys [ 36.030] (II) Power Button: Configuring as keyboard [ 36.030] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 36.030] (**) Option "xkb_rules" "evdev" [ 36.030] (**) Option "xkb_model" "evdev" [ 36.030] (**) Option "xkb_layout" "fr" [ 36.032] (II) XKB: reuse xkmfile /var/lib/xkb/server-1773A72ADF3912178EB836318CC241E672AD6AB1.xkm [ 36.033] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 36.033] (**) Power Button: Applying InputClass "evdev keyboard catchall" [ 36.033] (**) Power Button: always reports core events [ 36.033] (**) Power Button: Device: "/dev/input/event0" [ 36.051] (II) Power Button: Found keys [ 36.051] (II) Power Button: Configuring as keyboard [ 36.051] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD) [ 36.051] (**) Option "xkb_rules" "evdev" [ 36.051] (**) Option "xkb_model" "evdev" [ 36.051] (**) Option "xkb_layout" "fr" [ 36.054] (II) config/udev: Adding input device Dell Dell USB Keyboard (/dev/input/event2) [ 36.054] (**) Dell Dell USB Keyboard: Applying InputClass "evdev keyboard catchall" [ 36.054] (**) Dell Dell USB Keyboard: always reports core events [ 36.054] (**) Dell Dell USB Keyboard: Device: "/dev/input/event2" [ 36.092] (II) Dell Dell USB Keyboard: Found keys [ 36.092] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 36.092] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 36.092] (**) Option "xkb_rules" "evdev" [ 36.092] (**) Option "xkb_model" "evdev" [ 36.092] (**) Option "xkb_layout" "fr" [ 36.092] (II) config/udev: Adding input device iMON Remote (15c2:0038) (/dev/input/event3) [ 36.092] (**) iMON Remote (15c2:0038): Applying InputClass "evdev pointer catchall" [ 36.092] (**) iMON Remote (15c2:0038): Applying InputClass "evdev keyboard catchall" [ 36.092] (**) iMON Remote (15c2:0038): always reports core events [ 36.092] (**) iMON Remote (15c2:0038): Device: "/dev/input/event3" [ 36.120] (II) iMON Remote (15c2:0038): Found 3 mouse buttons [ 36.120] (II) iMON Remote (15c2:0038): Found scroll wheel(s) [ 36.120] (II) iMON Remote (15c2:0038): Found relative axes [ 36.120] (II) iMON Remote (15c2:0038): Found x and y relative axes [ 36.120] (II) iMON Remote (15c2:0038): Found keys [ 36.120] (II) iMON Remote (15c2:0038): Configuring as mouse [ 36.120] (II) iMON Remote (15c2:0038): Configuring as keyboard [ 36.120] (**) iMON Remote (15c2:0038): YAxisMapping: buttons 4 and 5 [ 36.120] (**) iMON Remote (15c2:0038): EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200 [ 36.120] (II) XINPUT: Adding extended input device "iMON Remote (15c2:0038)" (type: KEYBOARD) [ 36.120] (**) Option "xkb_rules" "evdev" [ 36.120] (**) Option "xkb_model" "evdev" [ 36.120] (**) Option "xkb_layout" "fr" [ 36.120] (II) iMON Remote (15c2:0038): initialized for relative axes. [ 36.121] (II) config/udev: Adding input device iMON Remote (15c2:0038) (/dev/input/mouse0) [ 36.121] (II) No input driver/identifier specified (ignoring) [ 36.122] (II) config/udev: Adding input device IR-receiver inside an USB DVB receiver (/dev/input/event4) [ 36.122] (**) IR-receiver inside an USB DVB receiver: Applying InputClass "evdev keyboard catchall" [ 36.122] (**) IR-receiver inside an USB DVB receiver: always reports core events [ 36.122] (**) IR-receiver inside an USB DVB receiver: Device: "/dev/input/event4" [ 36.160] (II) IR-receiver inside an USB DVB receiver: Found keys [ 36.160] (II) IR-receiver inside an USB DVB receiver: Configuring as keyboard [ 36.160] (II) XINPUT: Adding extended input device "IR-receiver inside an USB DVB receiver" (type: KEYBOARD) [ 36.160] (**) Option "xkb_rules" "evdev" [ 36.160] (**) Option "xkb_model" "evdev" [ 36.160] (**) Option "xkb_layout" "fr" [ 36.471] (II) intel(0): EDID for output HDMI2 [ 36.480] (II) intel(0): EDID for output HDMI3 [ 36.485] (II) intel(0): EDID for output DP2 [ 36.490] (II) intel(0): EDID for output DP3 [ 36.501] (II) intel(0): EDID for output HDMI2 [ 36.510] (II) intel(0): EDID for output HDMI3 [ 36.515] (II) intel(0): EDID for output DP2 [ 36.520] (II) intel(0): EDID for output DP3 [ 36.530] (II) intel(0): EDID for output HDMI2 [ 36.539] (II) intel(0): EDID for output HDMI3 [ 36.544] (II) intel(0): EDID for output DP2 [ 36.549] (II) intel(0): EDID for output DP3 [ 42.073] (II) intel(0): EDID for output HDMI2 [ 42.082] (II) intel(0): EDID for output HDMI3 [ 42.087] (II) intel(0): EDID for output DP2 [ 42.092] (II) intel(0): EDID for output DP3 [ 164.354] (II) intel(0): EDID for output HDMI2 [ 164.363] (II) intel(0): EDID for output HDMI3 [ 164.368] (II) intel(0): EDID for output DP2 [ 164.373] (II) intel(0): EDID for output DP3
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
Thanks
XabiX
Comment