Page 1 of 9 123 ... LastLast
Results 1 to 10 of 82

Thread: VaAPI with Intel HD Graphics Clarkdale i3 proc not working with mplayer

  1. #1
    Join Date
    Aug 2010
    Posts
    58

    Question VaAPI with Intel HD Graphics Clarkdale i3 proc not working with mplayer

    Hello ALL,

    I have been spending sometime trying to activate HW decompression for playing movies as the default configuration with x11 or gl don't provide good results.

    I am using an HTPC server with intel Clarkdale i3 530 proc under lucid kernel 2.6.35-020635-generic using the latest intel drivers available at http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu.

    I have followed these requirements:
    http://intellinuxgraphics.org/h264.html
    http://www.splitted-desktop.com/~gbeauchesne/

    and installed libdrm and libva with the following commands:

    libdrm 2.4.21
    wget http://dri.freedesktop.org/libdrm/libdrm-2.4.21.tar.bz2
    ./configure --enable-i965-driver --prefix=/
    make
    checkinstall

    libva 0.31.1
    FYI I was not able to compile the libva package as described in gbeauchesne website with ths following command "dpkg-buildpackage -rfakeroot -uc -us". This is what I have done:
    wget http://www.splitted-desktop.com/~gbe...-latest.tar.gz
    ./configure --enable-i965-driver --prefix=/usr
    make
    checkinstall

    vainfo seems good to me:
    Code:
    libva: libva version 0.31.1-sds1
    libva: va_getDriverName() returns 0
    libva: Trying to open /usr/lib/va/drivers/i965_drv_video.so
    libva: va_openDriver() returns 0
    vainfo: VA API version: 0.31
    vainfo: Driver version: i965 Driver 0.1
    vainfo: Supported profile and entrypoints
          VAProfileMPEG2Simple            :    VAEntrypointVLD
          VAProfileMPEG2Main              :    VAEntrypointVLD
    Then I compiled mplayer-vaapi-20100713:
    wget http://www.splitted-desktop.com/~gbe...latest.tar.bz2
    ./checkout-patch-build.sh --enable-vaapi --enable-x11 --enable-debug
    I also tried with ./configure --enable-vaapi --enable-x11 --enable-debug

    Here is the output of mplayer:
    Code:
    ./mplayer -vo vaapi -nosound /media/RAID/Video/Memento\ -\ En\ st\ Fr.avi 
    MPlayer SVN-r31722-4.4.3 (C) 2000-2010 MPlayer Team
    mplayer: could not connect to socket
    mplayer: No such file or directory
    Failed to open LIRC support. You will not be able to use your remote control.
    
    Playing /media/RAID/Video/Memento - En st Fr.avi.
    AVI file format detected.
    [aviheader] Video stream found, -vid 0
    [aviheader] Audio stream found, -aid 1
    VIDEO:  [DIV3]  528x272  24bpp  25.000 fps  744.1 kbps (90.8 kbyte/s)
    X11 error: BadValue (integer parameter out of range for operation)
    libva: libva version 0.31.1-sds1
    libva: va_getDriverName() returns 0
    libva: Trying to open /usr/lib/va/drivers/i965_drv_video.so
    libva: va_openDriver() returns 0
    ==========================================================================
    Opening video decoder: [ffmpeg] FFmpeg's libavcodec codec family
    Selected video codec: [ffdivx] vfm: ffmpeg (FFmpeg DivX ;-) (MSMPEG-4 v3))
    ==========================================================================
    Audio: no sound
    Starting playback...
    Movie-Aspect is undefined - no prescaling applied.
    VO: [vaapi] 528x272 => 528x272 Planar YV12 
    
    
    MPlayer interrupted by signal 11 in module: filter_video
    - MPlayer crashed by bad usage of CPU/FPU/RAM.
      Recompile MPlayer with --enable-debug and make a 'gdb' backtrace and
      disassembly. Details in DOCS/HTML/en/bugreports_what.html#bugreports_crash.
    - MPlayer crashed. This shouldn't happen.
      It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
      gcc version. If you think it's MPlayer's fault, please read
      DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
      won't help unless you provide this information when reporting a possible bug.
    Unfortunately I don't know how to debug with gdb etc... but I wanted to first share my experience with you guys in order to see if I missed something.

    Also if someone has tested this and can confirm that VaAPI works with i3 proc that would be good too.

    Thanks for anyone's help
    XabiX

    lspci:
    Code:
    00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12)
        Subsystem: Giga-byte Technology Device d000
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 46
        Region 0: Memory at fb400000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at ff00 [size=8]
        Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
            Address: fee0a00c  Data: 41a1
        Capabilities: [d0] Power Management version 2
            Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
            Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a4] PCIe advanced features <?>
        Kernel driver in use: i915
        Kernel modules: i915
    Xorg.log:
    Code:
    X.Org X Server 1.7.6
    Release Date: 2010-03-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
    Current Operating System: Linux xabix-desktop 2.6.35-020635-generic #020635 SMP Mon Aug 2 09:08:21 UTC 2010 x86_64
    Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.35-020635-generic root=UUID=0785fb3c-6674-41e4-a48e-73c3a8c7ed25 ro quiet splash
    Build Date: 16 June 2010  09:34:29AM
    xorg-server 2:1.7.6-2ubuntu7.2 (For technical support please see http://www.ubuntu.com/support) 
    Current version of pixman: 0.16.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 16 09:40:51 2010
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/usr/lib/X11/xorg.conf.d"
    (==) ServerLayout "Default Layout"
    (**) |-->Screen "TV" (0)
    (**) |   |-->Monitor "TSB-TV"
    (**) |   |-->Device "Intel HD Graphics"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
        Entry deleted from font path.
    (==) FontPath set to:
        /usr/share/fonts/X11/misc,
        /usr/share/fonts/X11/100dpi/:unscaled,
        /usr/share/fonts/X11/75dpi/:unscaled,
        /usr/share/fonts/X11/Type1,
        /usr/share/fonts/X11/100dpi,
        /usr/share/fonts/X11/75dpi,
        /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
        built-ins
    (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    (II) Loader magic: 0x7ca300
    (II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 6.0
        X.Org XInput driver : 7.0
        X.Org Server Extension : 2.0
    (++) using VT number 7
    
    (--) PCI:*(0:0:2:0) 8086:0042:1458:d000 Intel Corporation Core Processor Integrated Graphics Controller rev 18, Mem @ 0xfb400000/4194304, 0xe0000000/268435456, I/O @ 0x0000ff00/8
    (--) PCI: (0:4:0:0) 14f1:8852:d470:9022 Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder rev 2, Mem @ 0xfb800000/2097152
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.13.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.1.0
        ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "intel"
    (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 2.11.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 6.0
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
    (II) Primary Device is: PCI 00@00:02:0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 9, (OK)
    drmOpenByBusid: drmOpenMinor returns 9
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (**) intel(0): Depth 24, (--) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) Clarkdale
    (--) intel(0): Chipset: "Clarkdale"
    (==) intel(0): video overlay key set to 0x101fe
    (II) intel(0): Output VGA1 using monitor section TSB-TV
    (**) intel(0): Option "PreferredMode" "1280x720_50"
    (**) intel(0): Option "Enable" "true"
    (II) intel(0): Output HDMI1 has no monitor section
    (II) intel(0): Output DP1 has no monitor section
    (II) intel(0): Output HDMI2 using monitor section TSB-TV
    (II) intel(0): Output HDMI3 has no monitor section
    (II) intel(0): Output DP2 has no monitor section
    (II) intel(0): Output DP3 has no monitor section
    (II) intel(0): EDID for output VGA1
    (II) intel(0): EDID for output HDMI1
    (II) intel(0): EDID for output DP1
    (II) intel(0): EDID for output HDMI2
    (II) intel(0): Manufacturer: TSB  Model: 103  Serial#: 0
    (II) intel(0): Year: 2006  Week: 0
    (II) intel(0): EDID Version: 1.3
    (II) intel(0): Digital Display Input
    (II) intel(0): Max Image Size [cm]: horiz.: 196  vert.: 142
    (II) intel(0): Gamma: 1.00
    (II) intel(0): No DPMS capabilities specified
    (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) intel(0): Default color space is primary color space
    (II) intel(0): First detailed timing is preferred mode
    (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.600
    (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.312 whiteY: 0.329
    (II) intel(0): Manufacturer's mask: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 74.2 MHz   Image Size:  708 x 398 mm
    (II) intel(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
    (II) intel(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
    (II) intel(0): Supported detailed timing:
    (II) intel(0): clock: 74.2 MHz   Image Size:  708 x 398 mm
    (II) intel(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
    (II) intel(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
    (II) intel(0): Monitor name: TSB-TV
    (II) intel(0): Ranges: V min: 49 V max: 61 Hz, H min: 15 H max: 46 kHz, PixClock max 80 MHz
    (II) intel(0): Number of EDID sections to follow: 1
    (II) intel(0): EDID (in hex):
    (II) intel(0):     00ffffffffffff005262030100000000
    (II) intel(0):     0010010380c48e000eee91a3544c9926
    (II) intel(0):     0f505400000001010101010101010101
    (II) intel(0):     010101010101011d80d0721c1620102c
    (II) intel(0):     2580c48e2100009e011d00bc52d01e20
    (II) intel(0):     b8285540c48e2100001e000000fc0054
    (II) intel(0):     53422d54560a202020202020000000fd
    (II) intel(0):     00313d0f2e08000a20202020202001b1
    (II) intel(0): Not using mode "1920x1080i" (interlace mode not supported)
    (II) intel(0): Not using mode "1920x1080i_28.00" (interlace mode not supported)
    (II) intel(0): Printing probed modes for output HDMI2
    (II) intel(0): Modeline "1280x720_50.0"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
    (II) intel(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
    (II) intel(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz)
    (II) intel(0): EDID for output HDMI3
    (II) intel(0): EDID for output DP2
    (II) intel(0): EDID for output DP3
    (II) intel(0): Output VGA1 enabled by config file
    (II) intel(0): Output HDMI1 disconnected
    (II) intel(0): Output DP1 disconnected
    (II) intel(0): Output HDMI2 enabled by config file
    (II) intel(0): Output HDMI3 disconnected
    (II) intel(0): Output DP2 disconnected
    (II) intel(0): Output DP3 disconnected
    (II) intel(0): Using sloppy heuristic for initial modes
    (EE) intel(0): Output VGA1 enabled but has no modes
    (II) intel(0): Output HDMI2 using initial mode 1280x720_50.0
    (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (II) intel(0): Kernel page flipping support detected, enabling
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
    (==) Depth 24 pixmap format is 32 bpp
    (II) intel(0): [DRI2] Setup complete
    (**) intel(0): Tiling enabled
    (**) intel(0): SwapBuffers wait enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) UXA(0): Driver registered support for the following operations:
    (II)         solid
    (II)         copy
    (II)         composite (RENDER acceleration)
    (II)         put_image
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (==) intel(0): DPMS enabled
    (==) intel(0): Intel XvMC decoder enabled
    (II) intel(0): Set up textured video
    (II) intel(0): [XvMC] xvmc_vld driver initialized.
    (II) intel(0): direct rendering: DRI2 Enabled
    (WW) intel(0): Option "ForceSDVODetect" is not used
    (WW) intel(0): Option "ConnectedMonitor" is not used
    (WW) intel(0): Option "CustomEDID" is not used
    (WW) intel(0): Option "Enable" is not used
    (WW) intel(0): Option "PreferredMode" is not used
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
    (II) GLX: Initialized DRI2 GL provider for screen 0
    (II) intel(0): Setting screen physical size to 338 x 190
    (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    (II) config/udev: Adding input device Power Button (/dev/input/event1)
    (**) Power Button: Applying InputClass "evdev keyboard catchall"
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
        compiled for 1.7.6, module version = 2.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "fr"
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "evdev"
    (**) Option "xkb_layout" "fr"
    (II) intel(0): EDID vendor "TSB", prod id 259
    (II) intel(0): Using hsync ranges from config file
    (II) intel(0): Using vrefresh ranges from config file
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1920x540"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz)
    (II) intel(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz)
    (II) intel(0): EDID vendor "TSB", prod id 259

  2. #2
    Join Date
    Aug 2007
    Posts
    6,645

    Default

    You do too much wrong things. If you want to use U 10.04 you do NOT add any driver updates, only a new 2.6.35+ kernel. Then run:

    http://kanotix.com/files/fix/install-libdrm.sh

    The same script works for Debian Squeeze/Sid. After that:

    http://kanotix.com/files/fix/mplayer-vaapi-latest.txt

    All scripts as root, vlc would also work well. To install:

    http://kanotix.com/files/fix/vlc-vaapi-local.txt

    Run that script first as root and then as user.

  3. #3
    Join Date
    Aug 2010
    Posts
    58

    Default

    Quote Originally Posted by Kano View Post
    You do too much wrong things. If you want to use U 10.04 you do NOT add any driver updates, only a new 2.6.35+ kernel. Then run:

    http://kanotix.com/files/fix/install-libdrm.sh

    The same script works for Debian Squeeze/Sid. After that:

    http://kanotix.com/files/fix/mplayer-vaapi-latest.txt

    All scripts as root, vlc would also work well. To install:

    http://kanotix.com/files/fix/vlc-vaapi-local.txt

    Run that script first as root and then as user.
    Thanks Kano for your quick reply and propositions. I ll try that and get back sharing the results.

    Merci

  4. #4
    Join Date
    Aug 2010
    Posts
    58

    Default

    It seems that the scripts need some tweaking or maybe it s because I did some tries before.

    Here are the logs of both install fyi:
    http://xabix.free.fr/uploads/install-libdrm.log
    http://xabix.free.fr/uploads/mplayer-vaapi-latest.log


    Nevertheless I ll keep investigating why they didn't work. I should be missing some dependancies etc...

  5. #5
    Join Date
    Aug 2010
    Posts
    58

    Default

    Quote Originally Posted by XabiX View Post
    It seems that the scripts need some tweaking or maybe it s because I did some tries before.

    Here are the logs of both install fyi:
    http://xabix.free.fr/uploads/install-libdrm.log
    http://xabix.free.fr/uploads/mplayer-vaapi-latest.log


    Nevertheless I ll keep investigating why they didn't work. I should be missing some dependancies etc...
    There is something strange as the cmd with sudo doesn't work either:
    xabix@xabix-desktop:/tmp/vaapi/libva-0.31.1$ sudo dpkg-buildpackage -rfakeroot -D -us -uc -i -b
    dpkg-buildpackage: avertissement: utilisation d'une commande pour obtenir les privilèges administrateur en tant qu'administrateur
    dpkg-buildpackage*: définir CFLAGS à la valeur par défaut*: -g -O2
    dpkg-buildpackage*: définir CPPFLAGS à la valeur par défaut*:
    dpkg-buildpackage*: définir LDFLAGS à la valeur par défaut*: -Wl,-Bsymbolic-functions
    dpkg-buildpackage*: définir FFLAGS à la valeur par défaut*: -g -O2
    dpkg-buildpackage*: définir CXXFLAGS à la valeur par défaut*: -g -O2
    dpkg-buildpackage: paquet source libva
    dpkg-buildpackage: version source 0.31.1-1+sds4
    dpkg-buildpackage: source changé par Gwenole Beauchesne <gbeauchesne@splitted-desktop.com>
    dpkg-buildpackage: architecture hôte amd64
    fakeroot debian/rules clean
    /usr/bin/fakeroot: line 176: debian/rules: Permission non accordée
    dpkg-buildpackage: erreur: fakeroot debian/rules clean a produit une erreur de sortie de type 126

  6. #6
    Join Date
    Aug 2007
    Posts
    6,645

    Default

    They are NOT tested when you enabled extra ppa. Maybe install maverick and just run the mplayer vaapi script. I do not test U all the time, but pure lucid worked the way i told you and maverick works without libdrm install. I can not spend my time fixing your broken install with extra ppas.

    Btw. libva does not compile because you manually installed it. Clean your system first!

  7. #7
    Join Date
    Aug 2010
    Posts
    58

    Default

    Quote Originally Posted by Kano View Post
    They are NOT tested when you enabled extra ppa. Maybe install maverick and just run the mplayer vaapi script. I do not test U all the time, but pure lucid worked the way i told you and maverick works without libdrm install. I can not spend my time fixing your broken install with extra ppas.

    Btw. libva does not compile because you manually installed it. Clean your system first!
    By cleaning the system do you mean removing the packages through synaptic?
    I always installed home built packages with the checkinstall command so I can uninstall them easily by removing the package. Or am I missing something when doing this?

    I did remove libva and libdrm from synaptic but it looks like it's not enough.
    When you say removing ppa, is it also true for video drivers, mythtv etc...

    I just reinstalled and finished to reconfigure everything so I am more willing to find how to clean the system than reinstalling ;-).
    Besides upgrading to maverick maybe also differ from a fresh install.

    intel drivers site say that intel drivers 2.11 are required which are not available under lucid without ppa so some customization is required.

    I still have a lot to learn

  8. #8
    Join Date
    Feb 2010
    Location
    Germany
    Posts
    90

    Default

    Quote Originally Posted by XabiX View Post
    Hello ALL,

    I have been spending sometime trying to activate HW decompression for playing movies as the default configuration with x11 or gl don't provide good results.

    I am using an HTPC server with intel Clarkdale i3 530 proc under lucid kernel 2.6.35-020635-generic using the latest intel drivers available at http://ppa.launchpad.net/ubuntu-x-swat/x-updates/ubuntu.

    I have followed these requirements:
    http://intellinuxgraphics.org/h264.html
    http://www.splitted-desktop.com/~gbeauchesne/

    and installed libdrm and libva with the following commands:

    libdrm 2.4.21
    wget http://dri.freedesktop.org/libdrm/libdrm-2.4.21.tar.bz2
    ./configure --enable-i965-driver --prefix=/
    make
    checkinstall

    libva 0.31.1
    FYI I was not able to compile the libva package as described in gbeauchesne website with ths following command "dpkg-buildpackage -rfakeroot -uc -us". This is what I have done:
    wget http://www.splitted-desktop.com/~gbe...-latest.tar.gz
    ./configure --enable-i965-driver --prefix=/usr
    make
    checkinstall

    vainfo seems good to me:
    Code:
    libva: libva version 0.31.1-sds1
    libva: va_getDriverName() returns 0
    libva: Trying to open /usr/lib/va/drivers/i965_drv_video.so
    libva: va_openDriver() returns 0
    vainfo: VA API version: 0.31
    vainfo: Driver version: i965 Driver 0.1
    vainfo: Supported profile and entrypoints
          VAProfileMPEG2Simple            :    VAEntrypointVLD
          VAProfileMPEG2Main              :    VAEntrypointVLD
    I'm on Debian. I followed the Intel Howto straight. Your libdrm prefix should be /usr. Don't forget to remove older libva/drm.
    Code:
    max@t410:~/code/mplayer-vaapi-20100713/mplayer-vaapi$ vainfo 
    libva: libva version 0.31.1
    libva: va_getDriverName() returns 0
    libva: Trying to open /usr/lib/dri/i965_drv_video.so
    libva: va_openDriver() returns 0
    vainfo: VA API version: 0.31
    vainfo: Driver version: i965 Driver 0.1
    vainfo: Supported profile and entrypoints
          VAProfileMPEG2Simple            :	VAEntrypointVLD
          VAProfileMPEG2Main              :	VAEntrypointVLD
          VAProfileH264Baseline           :	VAEntrypointVLD
          VAProfileH264Main               :	VAEntrypointVLD
          VAProfileH264High               :	VAEntrypointVLD
    mplayer works fine, too.

  9. #9
    Join Date
    Aug 2010
    Posts
    58

    Default

    Quote Originally Posted by Rabauke View Post
    I'm on Debian. I followed the Intel Howto straight. Your libdrm prefix should be /usr. Don't forget to remove older libva/drm.
    Hi Rabauke,

    So it looks like I was almost there. When you say don't forget to remove older libva and libdrm can you precise a little bit how to do so.

    I had libdrm installed to 2.4.21 thanks to Kano's script and I had libva from gbeauchesne site. I can remove easily libva* from synaptic but libdrm complains about all the dependancies.
    So instead to remove it can I just downgrade to the official U pkg 2.4.18 or this will not work?

    Should I also run an updatedb and locate to suppress the remaining libdrm/libva entries in /lib/* ?

    Between your vainfo and mine, I am missing the H264 lines so I assume this why it s not working. Are these missing lines because of my libva install or libdrm or both?

    I was just wondering if I can keep the libdrm installed as they are linked to many pkgs and I don't want to break anything.

    Merci
    XabiX

  10. #10
    Join Date
    Aug 2010
    Posts
    58

    Default

    Here is what I ve done:
    remove libva*
    downgrade libdrm* to official U release 2.4.18-ubuntu4
    remove libkms1 and libdrm-dev

    Compile latest libdrm with
    ./configure --prefix=/usr
    make
    checkinstall

    Compile latest libva with
    ./configure --enable-i965-driver --prefix=/usr
    make
    checkinstall

    Now the vainfo complains with libdrm which is missing for intel drivers.
    Code:
    xabix@xabix-desktop:/usr/local/src/libva-0.31.1$ vainfo 
    libva: libva version 0.31.1
    libva: va_getDriverName() returns 0
    libva: Trying to open /usr/lib/dri/i965_drv_video.so
    libva error: dlopen of /usr/lib/dri/i965_drv_video.so failed: /usr/lib/dri/i965_drv_video.so: undefined symbol: drm_intel_bo_mrb_exec
    libva: va_openDriver() returns -1
    vaInitialize failed with error code -1 (unknown libva error),exit
    xabix@xabix-desktop:/usr/local/src/libva-0.31.1$ ll /usr/lib/dri/i965_drv_video.so
    -rwxr-xr-x 1 root root 490696 2010-08-17 20:01 /usr/lib/dri/i965_drv_video.so*
    When I compiled libdrm I only got one package and not libdrm-intel1 and libdrm2 either.

    What I will do is maybe install libdrm with Kano's script and re-compile libva with the right prefix in the configure see if this works.

    Thanks
    XabiX

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •