I'm having some problems with the last few ATI updates I installed. I'm having a problem (that I've seen on some older systems before...and fixed), where scrolling in webpages is horribly slow especially if flash is in use, and with dragging windows around. There's no "Smooth" dragging.
also, I now get a "Bus error" when running amdcccle...
I'm using Fedora 11 x86_64. I have Compiz installed, but it's disabled. I first used the latest xorg updates from fedora. No luck. Next, I installed the ati drivers from ati. No luck (actually caused me problems with my DVI based KVM switch.
kernel info: Linux foo 2.6.30.10-105.2.23.fc11.x86_64 #1 SMP Thu Feb 11 07:06:34 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
here are the installed xorg drivers:
xorg-x11-drv-ati-6.12.2-14.fc11.x86_64
xorg-x11-drv-catalyst-libs-10.1-1.fc11.x86_64
xorg-x11-drivers-7.3-11.fc11.x86_64
xorg-x11-drv-catalyst-10.1-1.fc11.x86_64
Here is the xorg.conf file that's in use:
I can provide the xorg log if desired as well.
Thanks for any help you can provide in advance!
also, I now get a "Bus error" when running amdcccle...
I'm using Fedora 11 x86_64. I have Compiz installed, but it's disabled. I first used the latest xorg updates from fedora. No luck. Next, I installed the ati drivers from ati. No luck (actually caused me problems with my DVI based KVM switch.
kernel info: Linux foo 2.6.30.10-105.2.23.fc11.x86_64 #1 SMP Thu Feb 11 07:06:34 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux
here are the installed xorg drivers:
xorg-x11-drv-ati-6.12.2-14.fc11.x86_64
xorg-x11-drv-catalyst-libs-10.1-1.fc11.x86_64
xorg-x11-drivers-7.3-11.fc11.x86_64
xorg-x11-drv-catalyst-10.1-1.fc11.x86_64
Here is the xorg.conf file that's in use:
Code:
# Xorg configuration created by livna-config-display Section "ServerLayout" Identifier "aticonfig Layout" Screen 0 "Screen0" 1920 0 Screen "amdcccle-Screen[3]-1" 0 0 EndSection Section "Files" ModulePath "/usr/lib64/xorg/modules/extensions/catalyst" ModulePath "/usr/lib64/xorg/modules" EndSection Section "ServerFlags" Option "AIGLX" "on" Option "Xinerama" "on" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1200" Option "TargetRefresh" "60" Option "Position" "1920 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" Option "SWCursor" "true" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" Option "Monitor-DFP2" "0-DFP2" Option "Monitor-DFP1" "0-DFP1" Option "AccelMethod" "EXA" Option "MigrationHeuristic" "greedy" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "amdcccle-Device[3]-1" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-DFP2" "0-DFP2" Option "OpenGLOverlay" "off" Option "VideoOverlay" "on" Option "AccelMethod" "EXA" Option "MigrationHeuristic" "greedy" BusID "PCI:3:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "aticonfig-Monitor[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3840 3840 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[3]-1" Device "amdcccle-Device[3]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Enable" EndSection
Thanks for any help you can provide in advance!
Comment